petercooper 2 hours ago

This is a neat history. However, going to be a bit nitpicky since they put this in bold re the 8008: "Intel did not design the instruction set of this chip" .. kinda true in a broad sense, but Intel engineers including Stan Mazor did change and enhance it, like adding increment and decrement operations and some other stuff mentioned in https://archive.computerhistory.org/resources/text/Oral_Hist...

  • adrian_b 1 hour ago

    The increment and decrement instructions were the only enhancements, according to what is said at your link.

    They removed from the ISA a branch-on-bit instruction and reduced the address size from 16 bits to 14 bits, because at that time Intel could not use bigger integrated circuit packages, with enough pins for a complete address.

    • wk_end 7 minutes ago

      The link describes increment/decrement as “one of the enhancements we made” (emphasis mine). The other things rattled off there aren’t necessarily “enhancements”, so I don’t think it’s clear that Mazor is giving an exhaustive list of changes or enhancements.

kens 1 hour ago

One thing I'd emphasize is that the 4004 is not related to the 8008 at all, except that many of the same people worked on both chips.

  • adrian_b 59 minutes ago

    Yes, the only relationship between 4004 and x86 is that the team which designed 4004 practically learned on it how to design PMOS logic circuits and by the end of the project they had a methodology of how to design such logic circuits in a more efficient way, which then they applied in their next project, which became Intel 8008.

    In my opinion, not only 4004 is completely unrelated to 8008 and x86, but it also does not deserve to be called a "microprocessor", which is intended to mean "monolithic computer CPU", while it can be argued that the 4004 chip set was neither monolithic nor usable as a general-purpose computer CPU.

drob518 43 minutes ago

Talking about little endian…

> This inverted storage, which was to haunt all processors evolved from the 8008, was a result of compatibility with the Datapoint bit-serial processor.

Am I the only one who thinks little endian is the right way to store things? Other than reading multi-byte numbers in order in hex dumps and things like that, I don’t see much advantage to big endian.

  • hikarudo 41 minutes ago

    Me too, little endian makes more sense.

  • dmitrygr 15 minutes ago

    Yes. Especially for lower-bit-width chips which must serially do longer-bit-width-math, LE makes sense, since the pieces you work with are in memory in proper order.

seblon 1 hour ago

As far as I remember, some chips was called 586 and 686,but I think this was just a synonym for Pentium processors.

  • ido 1 hour ago

    Pentium and Pentium-Pro (also reused i686 for later chips).

  • kens 1 hour ago

    The chips were going to be given those names, but the names were changed to Pentium and Pentium Pro for trademark reasons. Specifically, Intel couldn't trademark the numbers, which allowed competitors to call their chips the same numbers.

  • epcoa 1 hour ago

    This was never a widespread official Intel designation. Outside of Intel we use 586 and 686 to refer to the Pentium and Pentium Pro, it’s used by GCC, Linux, modern BSDs, etc, but it was never used widely by Intel marketing nor engineering. Intel proactively trademarked all names up to 986/i986 but this was before the AMD lawsuit.

  • nout 18 minutes ago

    Cyrix and AMD called those 5x86 and 6x86 (you can find pictures of those chips), because they couldn't call it "Pentium".

mdmizanur0001 42 minutes ago

is this a consumer grade CPU or it's a enterprise grade?