This is largely true of Toyota-style power-split e-CVT hybrids and series hybrids such as Nissan e-POWER, both of which eliminate (or dramatically simplify) the mechanical complexity of conventional transmissions.
Most other hybrid architectures are built around a conventional transmission and retain all of the mechanical complexity of an ICE drivetrain while adding substantial electrical complexity on top.
Subjectively, I think Japan was smart to not go full on EV, given the constraints they have; charging infrastructure, battery sourcing, and range. At the time when Tesla was selling under 500k cars (2020 and earlier) a year, there wasn't a problem with battery supply (they were able to ramp up). During the same time Toyota (e.g.) would be selling close to 10 million, and converting their customers to EV would cannibalize their own sales. Additionally, the current charging infrastructure can't even supply the EVs today if we add just 10% more on the road.
Even worst, if you're in California, the per mile price to charge an EV at home, without solar, is greater than filling up a hybrid Prius on today's gas prices.
The difference between the electric/gas price comparison depending on where you live is pretty wild. Here in Finland it’s completely the other way around - charging at home is about 1/10 the price of gasoline, assuming a relatively efficient gasoline vehicle. That’s just the cost of energy of course, EVs are expensive to purchase.
TBF it's much cheaper pretty much anywhere that isn't california. Their electric grid has been about as mismanaged as I think it's possible to be while remaining a highly developed country. But one example: https://en.wikipedia.org/wiki/Camp_Fire_(2018)#Infrastructur...
US gas prices are heavily subsidised by military interventions throughout the Middle East, and don’t factor in any externalities. On the other hand electric is massively abstractive and cheap electricity has major political blocks. Regulations and other punitive measures means US Solar panels cost twice that of Europe.
US gas prices are most heavily subsidised by domestic energy production since fracking was commercialised, military interventions havent been a major factor in the last decade or so
I’m looking more at the last 80 years as a whole. The manner of subsidy has always changed, but the subsidy remains.
Oddly though some types of energy as massively taxed. Taxation on solar in the US means that it costs 3-4 times the price in Europe and Australia. This is a political choice the US population made to have more expensive energy.
This is completely backwards. The oil companies did not support the Iraq war. Instability is bad for business and the war massively disrupted the Iraqi oil industry. You will not that oil prices rose sharply during the war years as well, it was a tax not a subsidy.
Yet every intervention has had the opposite effect. At some point you have to admit the data doesn't fit the theory.
1973, less oil
Tanker war, less oil
Iraq war, less oil
Iran war, less oil
In Canada, the Clean Fuel Regulations allow EV charging to generate carbon credits. Those credits can get shared, reducing the net cost of charging. I get a 16c/kWh rebate, and pay 20c/kWh to the utility. In Quebec, residential electricity rates are about 10c/kWh, which can make charging a revenue source.
> Even worst, if you're in California, the per mile price to charge an EV at home, without solar, is greater than filling up a hybrid Prius on today's gas prices.
Do you have a source for that? So all sources I find say that the energy cost per mile on electic is around 1/3rd than that of gas.
Yeah, it's not clear to me why people are just taking it as gospel that this will improve competitiveness. IMO it seems like it would lead to stagnation as it becomes more difficult for a single company to change anything.
Agree and disagree, a framework of standardized motor and frame, unibody or frame on body would be great.
Do we really need a new car to look cosmetically different every few years to spur sales and say “new?” At the same time this means they can still customize the sheet metal, for different trims and types but the motor is the same, transmission is the same, seat is the same, etc
And for those parts, do we really need new part numbers every year? Heterogeneous is great? But something something Henry ford you can have any color as long as it’s black is also ok.
Plus it isn’t really new, brand engineering is this. Toyota grabs the bmw z4 and makes it a Supra, Mazda grabs the rav4 and makes it the cx50, etc
And personally I think most cars have been getting uglier. I would’ve been happy if they stuck with what they had 10 years ago.
So yeah, if you wanna save money, stop wasting it on a new redesign every few years. Don’t waste the money retooling to change random things every year.
Tesla is an example of an actual opposite. Their best-selling model is the last one released, the refreshed Models Y and 3. Ones they try to keep selling year after year have been discontinued.
For them to stay competitive as independent companies? Of course! Otherwise they look identical and have the same parts, and their only competitive difference is what? Pricing? On the same parts?
If they standardize internal components like tie rods, wheel bearings and battery trays, I doubt anyone would think the cars look the same. In fact, I think this would be great: standardise the jelly bean parts that don't really change much and don't see much innovation. There is absolutely no reason that different cars should use different incompatible 12 V batteries when the capacity is identical.
> For them to stay competitive as independent companies? Of course! Otherwise they look identical and have the same parts, and their only competitive difference is what? Pricing? On the same parts?
What makes you think they'd look identical? You think the only parts in a car are cosmetic parts?
For me someone who does most of my car maintenance and repairs this would be very attractive knowing that parts were standardized and by doing so would guarantee that there would be a huge aftermarket parts marker since one part could target multiple models and this would mean competitive prices thus lowering the cost of repairs.
Still, however, as great as cheap available parts would be.. the major car brands desperately need to find ways to significantly lower the price of their cars. New cars and trucks are reaching the prices of like a big down payment you could put on a house. Standardized parts would definitely reduce costs but would that be enough? Even many 2 income households struggle to get ahead.
In my opinion the number one priority of these companies should be how can they make an inexpensive car that the average person can afford.
> Do we really need a new car to look cosmetically different every few years to spur sales and say “new?”
The problem that I have with cars in general is that they use pretty old technology and you want something new that actually works OK and it does not have that much lag. While I understand the myth about manufacturers using old components because they are proven, they should get over it and use circuits made in the 21st century. Reliability has grown a lot, we don't need vacuum tubes in the cars anymore (I am being sarcastic about the vacuum tubes).
Another thing is the subtle but annoying differences in cars in different geographies: in one country you have a 360-degree camera system, but in others they don't even offer it as an add-on. For the same car. And other little things.
What I would like to see though would be to have the ability to upgrade the hardware in the car every 2-3 years. Like replace 2-3 "boxes" full of components and have "an almost new car" with improved technology.
I'd prefer them to keep using the old parts if they work. That way I am more likely to be able to take it to an independent garage who will have compatible parts, rather than taking it to the dealership & paying a premium as well as waiting for ages for them to ship the brand new part in.
> Reliability has grown a lot, we don't need vacuum tubes in the cars anymore (I am being sarcastic about the vacuum tubes).
This is a rather unenlightened take. The electronics used in cars aren't typical consumer gear - the parts are much more rugged. This is for good reason. The same car could start life parked on the side of the road in the nevada desert (wild temperature fluctuations), go on a roadtrip through death valley in the summer, and a few years later be parked on the street in florida (ridiculously humid) or somewhere in north dakota (extreme cold). Meanwhile we expect not to have any major electrical issues over a 20+ year product life. It's actually fairly absurd when you stop and think about it.
> The electronics used in cars aren't typical consumer gear - the parts are much more rugged.
Do you think they make regular and -Q1 parts on different photolithography machines from different silicon? Nope, the only difference is post production testing and price.
I think it very much depends on how this is implemented. Some things simply don't need to have design changes almost ever because it it is a solved problem. Some things just need to share attachment points to be swapped with other or better versions. Like why do we need 20 different oil filter styles for 20 different cars? Why is one car battery 1/2 inch longer so it doesn't fit in another cars battery tray despite being the same capacity? Why do we need 20 different tierod ends on 20 different cars when a single design would work with 80% of them?
Several commentators mention batteries. Is this an issue in the US?
In Europe every car I've had has had roughly interchangeable batteries. There might be two or three different sizes for family petrol cars. That seems like a reasonable amount of useful variation for manufacturers to choose between when playing Tetris with all the components they need to fit alongside the engine.
Part of the reason Japanese cars had trouble getting a toehold in the Midwest is that American cars already had suppliers in common so it was more likely they had a set of rotors for your random Ford and they had to order them for your Subaru. That was also before people read some of the books on supply chains so those orders took longer.
if the US market thought it can compete or win certain markets then the door would be open.
FOR:
Smartphone,
Software,
AI models,
EV Cars,
Routers,
etc,
The reason is because Cybersecurity is a priority for us and the Chinese are spying on us blah blah.
I know for sure that cybercrime was no where as frequent as today, and with that not only is it from china anymore along with a much larger scale of intrusion and theft.
For most parts, they are actually just (unnecessarily) designed to be not compatible so that the manufacturer will take profit from parts as well. Incompatibility becomes a feature for profit, not for anything else. This might actually be good for competition because now a small company can start with less money and standardized parts and focus on things they can actually make a difference.
the toyota/byd bz3[1] seems similar to the NUMMI efforts made in the 90s by GM/Toyota, GM seems to be doing similar things with luxury brands more popular abroad like GM/Cadillac[2] though there may be a wean-off for those due to tariffs
I don't think this is a parts story fundamentally. The Japanese are behind in electric vehicles. They are trying to survive using these tricks but unless they start getting serious about making EVs they are doomed.
In some markets, the US notably, electric cars are kind of a curiosity. I think the main issue is that, at the low end, the total cost of ownership of an entry level Tesla or similar is rather high relative to something like a hybrid Corolla. At the high end, electric trucks are insanely expensive and less practical than gas trucks.
An entry level Tesla is kind of a luxury car though. It costs twice as much as a Dacia Spring and Chinese models are much better value, or so I’ve heard.
Honest question: what do people need software quality for? What exactly are they doing with their cars that need all that in-car software? A phone attached to the center column offers a better software experience than any car maker could offer. Are people really paying that much to play games on their car screens?
No. I own a tesla and what I value is the integrated dashcam and sentry mode. Next comes route planning (which is gmaps under the hood but on a larger screen so easier to see). Energy information so that I can check how much I used and when.
This is common in every major chinese EV manufacturer now, maybe apart from rock bottom cost tier.
I've sat in my friend's 600 HP Zeekr few months ago and saw all you mention in some form or another plus much, much more than in my colleague's tesla 3.
We're in a transition, but in the near future you'll need you'll plan less and basically just stop when you need to.
The capital cost of an EV charging station is absurdly low (compared to say building a gas station) and returns are high value with zero effort.
In other words they're a high return profit center, which means that pretty much every place which is aimed at "passing long distance traffic" will get one at some point. We're already seeing this play out a bit, but in 10 years they'll literally be everywhere.
Tesla also comes with massive political baggage in the form of Musk.
His interference in elections and the war in Ukraine hasn’t gone unnoticed in many markets. Tesla comes with weaker residual value because of the brand damage.
Now that other manufacturers are moving away from soft-screens towards tactile controls software UX is much less important too.
Personally, I’d much rather have “knob per function” than have to go menu diving through a GUI at 80mph.
There’s many great alternatives now that really are great value. i.e. Renault, Nissan, Skoda, VW, BMW, Dacha.
And politicians associated with Chinese makers are clean as a whistle?
I've got no love for the cringe machine that is Elon, but c'mon. Would people really buy from a Chinese maker over Tesla based on some kind of political stance?
What a load of bs, people have the attention span of a fruit fly. Saw one clown put a sticker "I got it before Elon went crazy!" on their Tesla in Copenhagen, but that's about it. Danish are buying Teslas like there's no tomorrow.
> Tesla had a 0.8% share of EV sales in October 2026 in Denmark.
Is this figure really for EVs only? I don't find this article[0] absolutely clear, but in context it seems to be referring to Tesla's share of all passenger car sales:
> Norway remained a bright spot for Tesla. The carmaker recorded its best October on record and was the country's top-selling car brand with a 9.8% market share, according to OFV. Chinese brands continued to expand their footprint, accounting for 22.5% of new passenger car registrations, their highest monthly share on record.
> [irrelevant quote]
> By contrast, Tesla's market share in Denmark was only 0.73%, behind BYD (002594.SZ), Leapmotor (9863.HK), Xpeng (9868.HK), and SAIC-owned MG (600104.SS), which captured between 1.6% and 5.5% of the market each.
I drove a VW ID recently and you have plenty of physical buttons everywhere you look as the driver, yet some important features are behind the touch screen.
If you ignore the ongoing nazi car brand aspect, which is pretty hard to I agree, I am not convinced the traditional car brands you mentioned are better value. And they have a nazi past too. But that’s a while ago so it’s okay.
OK, if don’t like German car brands because of their past there’s still Renault (French) and Nissan (Japanese).
Both have reasonably priced, well engineered EVs in their range now.
Both use Android Auto and IMHO that works very smoothly and without jank. Plus they have physical controls.
Personally it’s a company’s present and future behaviour that I care most about rather than stuff that happened in the 1930s and 40s no matter how horrific.
There's very little difference between Tesla and BYD day to day. I'm also going to have Android Auto open virtually all the time so couldn't see any difference.
I'm under the impression that even among the outliers that are people who buy new cars instead of used, most buy cars because they need to go places. How many of those are willing to shell out an extra 15k or so for something as vague as software quality?
I would never pay twice the price of the car for those, and tesla has made some properly stupid hostile UI decisions like moving turn lights into steering wheel.
Plus tesla is poisoned by nazi owner who is extremely hostile towards Europe for whatever reasons and feels like he needs to interfere in global politics, that brand is burned for good regardless of products. Something about having actual morals and spine and voting with wallet and not supporting evil actors if you don't have to.
I have owned a Tesla for a year but have now switched back to petrol simply because of range. I’ve spent way too many hours at fast chargers. And this was in the Netherlands and Germany. US distances are typically much longer from what I understand.
I exclusively charge away from home since I don't own a wallbox. I also regularly drive from north Germany to Switzerland, in my model 3 Highland that means 2-3 charge stops. Which I would do anyway.
Usually I charge when I go grocery shopping. I can't remember the last time I drove to a charging station just to charge.
Yes but this too is temporary. If you think how much cheaper it is to install a charging station than a gas station there is no reason competition will not drive down prices in the future.
Whle I obviously can't know exact GP's situation in particular, statistically speaking they are not necessarily an outlier, for the region they are from.
Typical Dutch driving pattern is strongly bimodal - a lot of everyday short trips (think commuting), plus several holiday trips per year - Austria, south of France, Italy, you name it. That would be the trips where "too many hours at fast chargers" would be a problem for me personally.
The fact that most people only drive a few miles most of the time is true exactly like most people don't have house fires most of the time.
It's a true statement, they don't. Yet everyone, not just people with jobs and hobbies that cause fires, still needs smoke alarms and fire extinguishers and building codes that demand multiple exits from bedrooms etc.
This "outlier" argument that a lot of people think makes sense, doesn't. It's completely invalid. Most people could actually get by with a golf cart most of the time. Except no they can't, because most of the time isn't good enough.
> US distances are typically much longer from what I understand.
Ehh that's complicated. They're much _much_ longer once you get out into the sticks. In the suburbs I imagine it varies. But in urban areas AFAIK they're fairly similar and as it happens those are the areas where you benefit from EVs the most while also being where people with highly paid jobs tend to be located.
BMW just launched an i3 with a 567 mile range. Is that enough?
Personally I think I’d be pretty happy with 300 to 400 miles.
Range will increase over time.
There’s still lots of efficiency improvements to be made like replacing the motor, differential and breaking systems with in-wheel combined brake/motor units.
We will get to a point where EV range is greater than on ICE cars.
> replacing the motor, differential and breaking systems with in-wheel combined brake/motor units.
There are a lot of drawbacks to this strategy btw. Unsprung weight gets a lot worse, and expensive high voltage parts become much more exposed to elements and shock loads. The benefits seem unlikely to outweigh the drawbacks for most applications.
I don't own a car, never have, but for everybody I know who has an EV (in the Netherlands) this is not an issue at all. After you need a recharge people need a coffee break too, and 20 minutes fast charging is enough to get you there. Maybe you have different needs or don't take breaks from driving that much?
I don’t know about Europe, but it’s quite typical in the US to drive for 1-1.5 hours for a regular commute. I drive to grad school 2-3 times a week for ~50 minutes typically for example, can easily be an hour on some days, no stops at all because that’s a relatively short distance. For longer journeys, we typically don’t stop except maybe every 2-3 hours. We would only stop for 20 minutes or more for a lunch break, not coffee, and once in the middle of a 5-8 hour road trip with smaller 5-10 minute stops sparsely placed.
This sounds very strange to me. My Model 3 goes 550km on a single charge. I use the charger at home and charge it like my phone. I've used a fast charger twice in 3 years, only as a curiosity.
I'm guessing maybe your problem was that you live in an apartment which doesn't provide a parking space with electricity, so fast charge was only option? Definintely an issue, especially in some countries where the usual home isn't a standalone single story like Australia where I live.
For sure and kinda understandable (i get - i just don’t get it, like the gun thing). But Toyota does sell different cars for different markets, why can’t they EVs for markets that want them. It took them 1.5 decades to make EV that’s finally competes with others makers.
> I think the main issue is that, at the low end, the total cost of ownership of an entry level Tesla or similar is rather high relative to something like a hybrid Corolla.
The problem there is you're comparing a Corolla to a Tesla and not e.g. a Chevy Bolt, which has a lower TCO than both.
> At the high end, electric trucks are insanely expensive and less practical than gas trucks.
There is a reason companies like Amazon use electric delivery trucks and it's not because they're impractical.
The main issue with trucks is that to give an electric truck a reasonable range when hauling a load, it needs a much bigger battery, and then to justify that you have to be actually using it as a truck full-time rather than as a truck-shaped car. Which is fully justified when you are, because then the fuel savings are enormous.
Whereas the people not really using it as a truck don't really need the bigger battery and then it doesn't have to cost that much. And even that isn't going to matter if the battery prices keep going down.
The other option which the US companies seem to be leaning into is to use the smaller battery and offer a range extender that runs on gas, which is a hybrid in a sense but it's more like an EV with a slot to put a gas generator.
> There is a reason companies like Amazon use electric delivery trucks and it's not because they're impractical.
Right. It's subsidies/incentives. And, of course, operating within the legal/governance structure, you can 'fine' the vehicles you don't like - have special clean air zones with fees for entry, high tax for oil/petrol, etc.
I hope you didn't mean this was something to do with costs. It's just the government using licensing, laws, taxes, etc to direct proceedings as they want - nothing to do with the underlying costs.
Large delivery trucks get like 10 MPG when they run on gasoline, and even worse than that in stop and go. Operating one full time puts its fuel consumption in the tens of thousands of dollars a year. Eliminating two thirds of that by using EVs pays for itself straight away without any subsidies.
> I think the main issue is that, at the low end, the total cost of ownership of an entry level Tesla or similar is rather high relative to something like a hybrid Corolla.
The main issue is that the US effectively bans imports of electric cars from the most efficient suppliers on the planet.
If EVs are "curiosity" in the US, it's dead. I think almost all the countries EVs have been successful are places that have lower population densities than the global average(not G7 or European average), including the US and not including China.
TCO in Europe for EV is beating ICE for a while now, that isn't the case in the US? Why not? Is it because Americans like big inefficient cars more, or is gasoline that much cheaper?
Also larger distances, and everything laid out inefficiently with bad zoning. Basically motor-lobby ruined it for them.
Just bought a PHEV (Peugeot), and if you can charge at home it runs rounds around ICE cost-wise, eves with it being relatively power-hungry compared to some alternatives (but so comfortable and sleek). With public charging it is marginally cheaper than ICE, pricing of public charge points swallowed the price advantage, but I guess it is not free to build that infrastructure, so its okay I guess.
> I think the main issue is that, at the low end, the total cost of ownership of an entry level Tesla or similar is rather high relative to something like a hybrid Corolla
Atlas Policy has the 2024 models within a few grand of each other at 7 years. It's not significant and the Tesla is a much nicer car. Hybrids are expensive to maintain.
It means firing a lot of people (labor intensity of EV production is much lower) and Japanese automakers can't do that for a multitude of reasons. They are cooked, they will just go out of business. Fast.
They are just failing, not transitioning. Old factories and brands closing down, new ones not appearing, people retiring or becoming jobless. Unions prevented transition.
What does that even mean? They’re definitely not making their chips in house they can’t be making their vision systems in house. Even the wires, I don’t think BYD is making its own wires. Unless I’m completely wrong and BYD is just that vertically stacked.
> Depending on the car, some estimates say that only the windows and tires are the only pieces that come from outside suppliers.
Until they grow big enough to make their own glass.
For tires it does not make sense to integrate that too. Unless someone has the bright ideea to sell unconventional sizes, like 18.2" or something crazy like that.
This take is somewhat off. The basic context here is that Japanese automakers experienced tremendous supply chain stress due to recent geopolitical events (such as the US-Iran war; you should remember the Strait of Hormuz crisis!)
So JAMA (Japanese automakers’ industrial association) asked what they could do. Their answer was to standardize basic components so that they could reduce bottlenecks.
If everyone uses the same parts and components, wouldn't that put even more stress on their respective supply chains in times of crisis? I feel like it would be better to diversify parts and their production more globally, to become independent of individual geopolitical hotspots.
Standardizing parts does not imply centralizing production. That may happen due to the inherent pressure to monopolize things, which companies seem to face, but they are orthogonal.
The cause effect is unrelated to standardization here. Having 2 different types of steel each of which have a single supplier is not meaningfully different than having 1 type of steel and a single supplier.
If you have 10 suppliers all making the same wind screen wiper motor it's obviously better and cheaper than 10 suppliers all making different versions of essentially the same thing. You might argue that this will eventually lead to fewer suppliers because one will manage to undercut the others. Maybe it's on the car manufacturers to source from a wider net even if things are slightly more expensive to keep a stronger ecosystem.
The parent comment is schematically correct. Right now each automaker uses its own quality standard for steel. So it’s non-trivial for a steel plant to supply materials to both Toyota and Honda.
Note that the scope of standardization is fairly limited at least for now. JAMA’s initial targets are steel, resins and wires.
Are they? Western OEMs are jack welch asset light businesses that just assemble vehicles from tier 1 suppliers. A tier one supplier even owns the final assembly plant for one Mercedes model. All mercedes provides is the badge and mountains of paperwork.
The german ones at least are very heavy on industry standardization, they have their own ISO/DIN-but-for-cars (VDA), which inspired equivalent standards now used by Chinese OEMs.
Industry standards are paperwork companies, which doesnt inherently imply they actually manufacture anything themselves. And usually standards are heavily tied into FMVSS or EPA regulations. Lots of busy work with nothing produced, but it sure employs a lot of politicians relatives.
>If you have 10 suppliers all making the same wind screen wiper motor it's obviously better and cheaper than 10 suppliers all making different versions
That's a non sequitur. At least unless the whole world switches to the same standard or they all only had one customer to begin with. If those suppliers have to change, adapt or extend their production to accommodate a standard while still shipping their original product to other customers, the end result will be more expensive. And it would have done nothing to relieve the geopolitical issues brought up by the parent comment.
Wait - you're saying that because they all change their product, that even though their market size jumps (they don't sell to one car manufacturer, they can sell to all) that that automagically increases costs?
Can I introduce you to peaks, troughs and shoulders?
You're likely to respond that the market stays the same, because its now split up by the wiper manufacturers that were creating specialised systems - fair.
Except nobody is ordering in an even cadence across the year, most orders will be higher at some points, and lower at others. And, the success of a given wiper manufacturer would be coupled hard to the success of the car (model[s]) they build for.
Now, the wiper manufacturers will be able to plan their output, coupled not to a given model(s) success, instead to the Japanese car industries success overall (less variable, still not deterministic though, to be fair)
That brings us to the peaks and troughs section - they dont have to have capacity for the peaks, which goes to waste (idle plant/staff) during the troughs, instead the other customers will fill the shoulders (more even output)
That's significant cost savings for the homogenised (wiper) manufacturers, with the one off cost of refitting their lines (which will be cheaper to do than normal because... multiple of them will be doing it...
Why would it jump? Overall demand doesn't increase under the given assumptions. They'd be selling the same thing in a different form. Producing more forms costs more money.
> (they don't sell to one car manufacturer, they can sell to all)
And also:
> You're likely to respond that the market stays the same, because its now split up by the wiper manufacturers that were creating specialised systems - fair.
> Except nobody is ordering in an even cadence across the year, most orders will be higher at some points, and lower at others. And, the success of a given wiper manufacturer would be coupled hard to the success of the car (model[s]) they build for.
Please try to have an honest read before misrepresenting posts.
OTOH, once you have a source for "USB-C cable" / "(insert esoteric cable config)", which one's gonna be more reliable experience ordering repeatedly?
Chances are, the esoteric crap comes from one plant and has one major customer, so every bit is gonna be the same.
With USB-C cables, Who the fkkk knows what you'll get? The only bit guaranteed identical between two USB-C cables is the connector shape. Everything else is lottery.
At this point I think EU should introduce a mandatory labeling scheme for USB-C cables, so that each cable is stamped both on packaging and on the cable itself, with the very same stuff USB-C cable tester shows it. And since the "better" cables have chips on board, we could enroll them in the same "Battery Passport" / "Digital Product Passport" thing, with steep fines to all the importers or resellers who waste people's time selling fake cables.
Just imagine the Apollo 13 carbon dioxide scrubber cartridge situation, but it's literally for 30k parts. Of which ~10k are ICE related.
(so, an EV without powertrain may have up to 30% less parts, or as many as 70% as an ICE. not like 10x less, at all. And this is before adding back in 7000 battery cells each made of few parts and the motor itself so... the parts count is actually the same? Interesting)
Toyota decided after the events of Fukushima that their supply-chain has to be way more resistant against external events. I assume they build up up to 6 months (I even remembered 18 months, but couldn't find evidence) of parts to make sure their production is not falling apart.
The fukushima plant workers performed incredibly during the disaster. They harvested batteries from the parking lot and used fire engine pumps. An excellent example of anti fragility.
The only strategic difference between BYD and the European auto makers is that BYD has decided to price their cars competitively whilst the European auto makers have decided to buy each other so they don't have to compete in price.
The Chinese makers are heavily subsidised both by stealing process from Tesla and just plain old cash ($230bn since 2009) and also the ingenuity and hard work of the Chinese people. Beijing even promoted an Audi engineer to be in charge of developing EVs and supporting the businesses, we have nothing like this in the west to cut through the layers of bureaucracy in the way of doing anything useful.
But yes I guess building everything yourself cuts out the middle man but obviously if the Japanese government spent $10bn (probably in Japan more like $20bn purchasing parity) into subsidising electric vehicles parts, robotics and supply chains I'm pretty sure it would have helped. Instead the Japanese government invested about 1/10th the amount of the Chinese.
My point is saying sure the end result could be vertical integration, however it's a million different things they did and number one was getting the right person into a position of power rather than a corrupt politician.
To be fair, Musk did not sue BYD, despite some widely considered clones of his cars and processes. Other manufacturers did. For example, in the EU, you can't sell the BYD Ti7 because a court ruled it violated Jaguar Land Rover IP.
He also said the same thing about their space rockets. I mean generally, China can steal what it wants, but anyone that wants to work on those kinds of things needs approval from their government and replicating anything that SpaceX is doing requires a level of discipline and process that a lot of companies won't be able to match. That said, I'm not sure that all of the why's of internal SpaceX decisions are public, and simply copying something without understanding the why's is probably a good way to end up with things that don't work once you're 1000 decisions deep into what you're doing.
Really what I took from his statements was an emphasis that good execution is harder than you think at the same time as his personal philosophy is shifting to like, machines will make everything so people's personal stakes in their own investment will be discardable. I don't know, he is both very wrong sometimes and a force of nature, so it's anyone's guess.
There’s a fairly good chance that had Japan provided funding to the likes of Toyota they would have used it to increase their funding of climate denial, anti-EV disinformation campaigns and boondoggles like hydrogen passenger cars to distract from mass roll-out of EVs.
I’m very concerned about ceding auto manufacturing to China as we are doing, but as you say there have been a lot of factors involved and some of them very much self inflicted.
There are pros and cons to the massive subsidies approach, but it's not magic and in a way they've been selling their limited assets off in exchange for a strategic trade imbalance that achieves neither the employment numbers they want or the sanction proofing insulation they wanted to establish before flexing in their region. In these advanced industries, it's basically a mathematical impossibility for them to erase all import dependencies, but they have done a lot to "control the means of production".
So good effort and they got some influence, but they're still left with the cons of this approach which unfortunately also means the rest of the world has to deal with it too. Regardless of their strategic aims, COVID gave people advance warning of the fragile way things have been restructured and also accentuated how insane China is in an undeniable way.
We could see Japanese automakers standardizing as primarily a cost savings, but in a way Japan is also trying to get industry ready to pivot to military manufacturing if needed the same way we have seen in some cases in the US to better prepare for World War 3. Japan is a critical component of that, because the US needs flexibility in how it interacts with China right now and Japan is helping us extend deterrence. Japan really is amazing and what they're doing is thankless.
That may or may not be one component to what the automakers are doing, but it would probably not be a popular thing to promote publicly in Japan, because of their culture. It will also be riskier in World War 3 than in World War 2, because these plants are big targets that aren't hard to hit in today's world so I think it would largely be a temporary strategy up until any conflict escalates to the point where plants are being attacked if so.
In terms of hiring, the CCP isn't unique in having engineers/technically literate people in charge of companies, you could argue it's pretty much the norm across the auto industry with some exceptions so I don't understand the point you're making there.
I think there has been hardcore China scaremongering in the auto industry for some reason, which I feel like has brought people on board with it (and unlike other doomsday trends, this has resonated in Europe ). I feel like the narrative is not even nearly true if we look at the evidence:
This includes China afaik. Japan is winning so much its not even funny. Besides, every car review of a Chinese car I've watched goes like this: great interior quality, low price, tons of extras (some of them weird), but the car is generally weak on 'core' specifics - ride quality, real-world efficiency/charge speed for EVs, interior space efficiency, ergonomics.
I think that exposes a couple things - I can get a door handle at a hardware store for like 8€ - it'll be made from metal, finished quite well etc etc. So putting in the widgets into cars that make an interior feel great doesn't cost that much, and people care about it a lot. Existing manufacturers have engaged in market segmentation based on this, but the Chinese saw this as an easy win and took it. That's one of the reasons why Chinese cars seem a lot better than what they cost.
People don’t understand how many families can’t afford cars for their teenagers. If those people can even get 1 more car and share, that means more people will go places, do things, lead to economic activity. Trains are of course the best case for this, but in much of US suburbia, a car is a necessity.
I keep reading about new breakthroughs they make in charging speed including 1MW networks. Do they not translate to real world models or just not to the cheaper ones that people tend to buy?
> Japan is winning so much its not even funny. Besides, every car review of a Chinese car I've watched goes like this: great interior quality, low price, tons of extras (some of them weird), but the car is generally weak on 'core' specifics - ride quality, real-world efficiency/charge speed for EVs, interior space efficiency, ergonomics.
This is the most out of touch take I’ve seen.
People simply don’t give a shit about that. China is taking over literally every car market they’re allowed to compete in. People want a good car that is not expensive. China has those in spades.
Toyota did this to themselves though. Everyone was waiting for a Toyota EV, and they've just under-performed by a huge margin. It was all meant to be solid state Lithium batteries which are still "coming" maybe 2027 (I doubt it).
In the past three years half a dozen Chinese automakers have entered the market where I live. Do they all use standardized parts, e.g. brake pads? Where would one get e.g. a DongFeng axle bearing if that part fails?
I was actually hit by a DongFeng almost a year ago. I'd love to know where they got the new grill and bumper cover from, and how long it took.
Ford and GM have been doing this since 2002 with the GM–Ford 6-speed automatic transmission [0]. The companies worked together on the design and ultimately worked with Allison Transmission on its manufacture.
One key difference between each company's implementation had to do with the shifting solenoids and the electronics. But as far as I know the actual clutch pads and gearing were the same.
> Ford and GM have been doing this since 2002 with the GM–Ford 6-speed automatic transmission [0]
All the manufacturers have been doing it since even before that, with major items like engines and transmissions.
What they haven't been doing is standardising all those other parts that need replacing. For example, standardising on the wheel hub+knuckle for 15-inch, 16-inch, 17-inch and 18-inch wheels will let wheels of the specific size use the same disks, calipers, pads, balljoint, wheel bearing, CV joint and all the sensors (wheel speed, brake, etc).
I see no reason why two different SUVs on 17-inch wheels need completely different brake pads shapes, when both sets have the same surface area, require the same performance profile, etc, but that's what we have now.
You can do the same with almost every mechanical and electrical subsystem in a car, and still have a large variety in cars produced. After all, car manufacturers don't manufacture their own tyres and batteries, do they? They don't manufacture they own wheels.
Even the things that are specific to them, they outsource anyway - they don't each have their own windscreen manufacturer, they outsource that. The already outsource all the glass, all the oils and fluids, all the pipes, etc, it's jus that they produce incompatible designs so that the actual parts manufacturer has to charge a jig setup fee for each of them. Standardising on parts brings in economies of scale.
> I see no reason why two different SUVs on 17-inch wheels need completely different brake pads shapes, when both sets have the same surface area, require the same performance profile, etc, but that's what we have now.
Because an SUV that has 17" wheels can weigh two tons or three tons or more. It can do 120 mph maximum speed or it can go to 160 mph or more.
The math changes really fast when it comes to stopping that SUV down based on those two parameters alone. You can see why different calipers, how many, brake disk size, type (ventilated or not), different sized brake pads.
>> I see no reason why two different SUVs on 17-inch wheels need completely different brake pads shapes, when both sets have the same surface area, require the same performance profile, etc, but that's what we have now.
> Because an SUV that has 17" wheels can weigh two tons or three tons or more. It can do 120 mph maximum speed or it can go to 160 mph or more.
Didn't I address this objection in advance with the words "performance profile"?
Right now, 95% of SUVs have the same brake performance requirements: under 4 ton, under 160mph, etc. There is no cost saving in making an entirely different wheel assembly for SUVs that require under 3.99 tons and under 159mph, which is what the current manufacturers are doing.
> Didn't I address this objection in advance with the words "performance profile"?
I did not understood your statement like that.
I don’t know about cost savings, but most likely it is about design decisions regarding how a wheel should look like (brake calipers in front of the wheel, in the back).
Makes sense, it's probably the only way they can actually compete with Chinese car manufacturers.
I feel like the title is misleading on the impact, it's actually all of the big players
> The push to simplify and lower costs comes as Japan’s seven automakers, including Toyota, Nissan, Honda, Mazda, Subaru, Mitsubishi, and Suzuki, work to fend off the increasingly competitive list of Chinese automaker
If there’s a company that needs new management, it’s Honda. I know they’re an engine company. But the company could never be more than a tiny, tiny shadow of itself if they don’t offer EVs.
They waited so long. They finally did it, with a rebadged GM because they don’t have the time to make one themselves, and it was popular. So they canceled it?
You’re way too late to start making your own, and they don’t even want to do it.
It’s like they think choosing to have a corporate Viking funeral and just burn the place down is the best way to honor their legacy. It’s nuts.
If there hadn't been an industrial revolution to soak up displaced farm labour things would have been pretty torrid when mechanisation hit Ag. thing is.. this time round there's a huge risk of displacement to automation and not many jobs the other side. Risk, not certaint.y
The plow very much did make some jobs obsolete. As did the power loom, and the washing machine, and the automobile, and many combinations of machinery in manufacturing and processing industries.
The objective and effect of the plow (and practically every tool humanity has ever made) was to improve the efficiency and efficacy of a single task. The objective of the AI hyperscalers is to create a tool that is capable of doing any arbitrary work. They want to abolish human effort as the last possible economic problem to solve - similarly to how cryptobros proselytized about the monetization of everything forever, hyperscalers are sticking their tech everywhere they possibly can to try and find places where it extracts money.
The argument this time around is stronger as the fundamentals are simpler and more practical and not a pipe dream. Cryptobros argued that you could "own" anything, as long as you and every other person alive agreed to jump through the stupidest hoops ever concieved and were fine with not actually owning things in any conventional sense and also you connect everything in the world to the internet because its Really Important™ that proof you bought a pack of gum is duplicated on millions of computers simultaneously. There are endless critiques of Web3 and crypto, but they all generally boil down to infeasibilty. The AI argument lacks this issue; real tangible work is being done profitably right now by machines. The uses of these machines can potentially be cheaper than paying a person to do this work. The work done may be done faster or better or cheaper (or some set of these) than if a human does it. Economic players recognize its potential value and are frothing at the mouth at the idea of never having to pay a person to do any work ever again. Employers don't want to pay people because people are generally their highest cost, and eliminating them for a cheaper alternative is their goal, and an economic inevitability.
This is not a good comparison. World has been growing the population and improving quality of life. This created thousands of new job categories. Current situation must be assessed on how many new jobs can be created. Will they last 15-25 years?
I like to imagine a new form of wealth distribution needed to ensure happy life for everyone- healthcare can become cheaper with AI for example. Could we fund healthcare for all?
I get your point that it was more localized than what AI offers, but the invention of the plow changed a lot more than one industry.
imagine the increased demand in animal husbandry, tool and die making, metalworking, woodworking, logistics and transportation, storage & food processing itself.
The secondary effects of any big jump like that rarely touch one portion of life.
This comment needs to be made more frequently. Nobody acknowledges the consumerist risks in AI job destruction. Henry Ford famously recognised he needed his workers to afford the cars he made.
I feel like that’s such a echo chamber perspective though. You need consumers with some income to consume products made by some other consumers for an income so they can consume. Like I’m not even saying you’re wrong, it’s absolutely true that this system is built on those assumptions and it will likely collapse if those assumptions are breaking, and a sudden collapse is not desirable, but I don’t think this system should remain the way it is either.
It’s off topic, and it also makes no sense. Why wouldn’t there be jobs? All the past times new automation arrived, there were still jobs. The jobs simply change. Why? Because we don’t stop wanting to buy things as automation makes things cheaper. We just buy more
Yes, it will be painful, but there will be jobs. I predict the younger generation will likely be better suited to adopt to this new world, because it will be easiest for them to start from scratch at a new paradigm, and less for them to lose by doing so
By painful, do you mean another Great Depression? Because a lot of societies just straight up did not survive that. Some nations are still trying to find their feet after that.
Saying its painful but things will be fine, comes across very... Farquaad.
Younger generation had an edge previously because they could absorb how to use new tools, machines etc compared to someone older.
That's not the case here anymore.
Older people don't have any problem using AI. It's just AI don't need that many people. I don't think you can blindly apply what happened in the past to this case.
> If you don’t think using AI is a skill, then you haven’t used it enough
Everything requires some amount of skill, but if you think using AI requires some great skill, like a degree, then you're using it wrong.
More to the point different people will have different levels of productivity using AI, but that has more to do with their existing or different skills. For instance more experienced developers tend to be more productive with AI (but not always).
Technology has been putting people out of work for centuries, and the economy and job market adjusted over time.
AI is no different, it's just people are swallowing the hype and getting hysterical. Certain things will be made more economical via AI which will create new opportunities which will in turn create other opportunities and new work.
The idea that AI will put everyone out of work is asinine.
Clearly opinion of somebody unconcerned about existential crysis, maybe you milked those faang bonuses and are set for life or at least think so. When society crumbles around you full of desperate folks it won't matter much though, there is no fence high enough you can build around yourself.
Most people, especially with kids, don't share this attitude to keep things polite.
This isn't fully correct, and the second part is focusing on cobsumption rather than the reason of employment: production.
In a fully mechanized/automated world, we won't work. It will make no sense to work. Im this scenario we have a wealth distribution problem. How do you decide who gets how much of what? Capitalism as we know it relies on cost of labour to distribute wealth.
Now, will AI be doing this? I don't think so. So I agree with you, it's going to increase productivity of a lot of jobs, but it will also create jobs. But we don't really know.
> In a fully mechanized/automated world, we won't work. It will make no sense to work.
Your entire argument rests of this statement. Why wouldn't it make sense to work? How would one company differentiate its products from another if they're all using the same AI?
Let's take a contrived example. Let's say automation can produce yachts for all of us at affordable prices someday. We're just going to all own yachts then. What will be the reason for one person to choose one yacht over another? Branding, marketing, positioning, patents, regulations, etc. Who does that work? Humans. Because ultimately you're selling to humans in a human-controlled world, not machines.
Why do we assume humans will do the work? What's the inherent reason for this?
What I'm saying isn't anything new. It was a hot topic during abd after imdustrial revolution. Even Karl Marx joined the discussion and wrote about it. The key thing is, what is money and what determines the prices. If there's abundance, the problems you talked about start to occur and market cannot price the goods. This is, to some, abundance communism.
I suppose, at that point, the key inputs to a company become creativity and ambition (rather than, say, overall effort). Humans are still better at those than AI.
Humans would still direct branding/marketing/positioning while we control the overall creativity and ambition of a project/company.
If the only intent is to make money, then I suppose you could build machines that tweak the creativity & ambition in different ways to create different products & services, in which case you can argue no humans need to be in the loop.
> Capitalism as we know it relies on cost of labour to distribute wealth.
But there is no pure capitalism and the government also redistributes wealth.
In an extreme(-ly unlikely) case of everything being automated the government would just redistribute the generated wealth to the populace (assuming a democracy). Apparently the end state of capitalism is socialism.
This is usually where people insist that the corporate overlords will take over and enslave everyone.
If full automation does come, you will buy the car for 1000$. Also, we are a long way from full automation, basically we need the next generation of AI, or even further than that. We will be all dead by then.
Human wants are infinite and not all of them can be handled by machines, so I'm not that worried about jobs. For one thing, we can come back to the older mode of education, where, instead of teaching children in schools en masse as we do now, each child had a private tutor. This would increase the need for teachers (tutors) by a factor of 30x, an create tens of millions of jobs in the US alone.
We can, but what points towards anyone wanting to do that? We can already do that if we want, but we don't. We focus on cost cutting and optimizing everything. If only some technology could provide a personalized tutoring experience to our kids.
And human labour cost changes because of complete automation? Maybe.
My point was basically that I only see us going the exact opposite direction of using more human labour. I don't see how that changes with more automation, I'm probably too pessimistic.
Detroit tried something like this as well, mostly under the USCAR/USAMP umbrella when Japanese competition knocked them off their stools, here's some reading if you're interested:
I can think of at least 3 types of car battery terminal in-use today: The old top-post, GM's side-post, and Toyota's (close-but-not-the-same!) top-post. And that's just the terminals -- nevermind the different sizes and mounting configurations.
I can screw in any of a whole galaxy of spark plugs into my Honda's engine, but that doesn't mean that the pistons won't collide with them before reaching TDC. (Does it matter if the screw threads are compatible when the parts crash before they can be used?)
Do we really have to talk about the light bulbs and the fuses, too? It's pretty boring, but I'll be bored later if anyone really wants to get into that.
(I'd like some popcorn, first, if anyone feels like contributing something.)
Somehow, LEDs made lightbulbs even worse. I have 7 different types of lightbulbs I need in my house. 7! Two of them aren't even screws. Wait, no, there's 8, I forgot the LED strips as well with the JSTs. Actually, nine if you include USB. Wait, ten, because there's USB-A and USB-C.
Sure, but to be fair, for cars manufactured across the same decade or two, at least going back to maybe the 50s or so (when 12V became "standard") and up to around 2010-ish - there was a small enough range of those things that I would have a reasonably good chance of getting on at the nearest gas station (well, "service station" since I'm in .au).
There were "step changes", like when headlights went from sealed beams to halogen bulbs in reflectors, You either had 6" or 8" sealed beams, or most likely H4 halogen bulbs (or a single filament bulb I've forgotten if you had separate low/high beam lights). If you had a headlight out, it mostly didn't matter what model car you had, or of it was a Ford or a VW or a Leyland, they all used one of 4 types of bulbs and they were all interchangeable.
In my head, and this is more motorcycle specific than car specific, but likely indicative across the entire automotive industry, it was the early 2000s when that started to change. My 1991 and 1998 Hondas and my 1999 Ducati and my 2004 Cagiva all used H4 headlight globes and the same 10/25W tail/brake light globes. My 2009 Yamaha was the first bike I owned where I had to buy headlight globes from Yamaha.
Once upon a time, headlight bulbs used to be more-standard than they are. Or at least: They were from my US perspective.
I've had cars with 9006/9007 headlight bulbs. Those were OK, I guess, other than the polycarbonate housings that turn into a clouded quagmire of shit when exposed to sunlight.
My 2012 Honda uses D2S headlight bulbs. That's a metal-halide part and it does not interchange with any other format, including other metal-halide parts. Each also requires both ballast and igniter assemblies. (Once lit, the bulb itself runs on [IIRC] 35V. But it takes a few kiloVolts to get it to initially arc over, vaporize some metallic salts, and start making light. And none of those volts are the ~12V that the car's electrical system produces.)
But at least it can use ~any regular D2S bulb. More-modern cars often use LED assemblies that aren't interchangeable between models at all.
But, yes: For decades in sealed-beam automobile world, we had a couple of sizes for round, and a couple of sizes for rectangular, and these sizes included the whole light-producing assembly, with focusing elements and the whole shebang. Some included a high-beam filament and some kept that separate, but: Any of these were very normal (standardized) things that anyone could pick up at ~any place selling auto parts and swap out with a screwdriver and whatever it takes to remove some trim.
(I've lived long enough to have seen sealed-beam headlight assemblies on shelves at small-town grocery stores. I have every confidence that if I rolled into the parking lot of such a store with a burnt-out halogen headlight in nineteen-eighty-something, then I'd be able to buy one and borrow enough basic hand tools to replace it in their parking lot in fairly short order. I'd probably also have paid Way Too Much for the headlight assembly itself, but I'd have been very grateful anyway. Convenience has a cost, even in matters of safety.)
Correct. You can even go back to things like the Shaker furniture or the history of the suit, or money itself. My point is that it is interesting how maximizing profit will always lead to thinsg merging and so eventually you'll reach a point of only one per category.
Think about it like this, 15~20 years ago, each company was building an operating system: Simbian, Windows Phone, Windows Mobile, various Linux based phones, Android, iOS, Blackberry OS, Palm OS, Firefox OS, Ubuntu's Unity Mobile... But then with the rise of iOS/Android, the cost of building something for each platform sky rocketed, you could have ten people each making the same tool for a different OS, or each making a different tool for the same OS. On the other hand it was easier to write one software for Android, and install Android everywhere, instead of having ten different apps for ten different OSes, and a company could install Android on their phones and have a smart phone, the other could make a whole operating system and only when all of the Anroid apps were available to their os it would have become feasible.
So efficiency and optimization always means the death of variety. You can have many programming languages with no good libraries, or a crappy JavaScript and C that have everything available to them... We all chose the latter.
But this was because software was expensive. Actually now this could be the only field where the trend could be reversed. You could make any niche platform, and porting apps over would be a few dollars and some minutes.
And are all Android phones the same? You can have one with liquid cooling of battery and turbo fan cooler for CPU! Same will be with the car. You can make so many different designs with standard parts!
Kind of. Some are bad, some are even worse. We were told and thought that future will bring us mass customization. That was 30-40 years ago. And all we got are these cars, phones, computers, microwaves... looking the same, doing the same, costing the same, and all are equally useless and shitty. Such a future.
Headlights have gone the other direction in my lifetime, to the point where I see more hazed and cracked lenses than I see good ones - bespoke replacements are too expensive to bother with.
Was chatting with the local hardware store owner a few weeks back about bulbs and solenoids - there are standards, but the breadth of different types in cars on the road means it isn't worth the shelf space to stock them - individual types move slowly while stocking enough variety to cover what the local market needs takes space away from more profitable things (like metric-thread fasteners).
Even nearby auto parts store end up ordering common parts from regional warehouses, putting them on roughly equal footing with RockAuto in terms of time to delivery (and of course at a disadvantage on price).
And this doesn't even get into truly unique parts like door latch motors or the various ICs that control various subsystems.
Frankly, it's a mess. Having a spare "parts car" sitting around is best if you have the space for it.
I believe exactly the opposite. Assembly line manufacturing already made everything exactly the same, and it is soon ending. Well, not ending, but becoming less important. As general-purpose robotics ramps up and labor+NRE becomes cheaper we will be able to have more custom stuff made just for us, instead of accepting whatever some contract manufacturer in China decided to make in a factory for five different brands to white-label.
having a product with a quantity of 1 made for you is always going to be more expensive than making a million of a thing, this is economics independent of any technology
I'm not sure what general purpose robotics even is because the point of robotics is to not be general purpose, a general purpose robot is hardly faster than a general purpose human, the speed of the assembly line comes from recombining standardized parts, that's true for human or robotic artisanal vs assembly production
the bespoke sandwich shop is always going to be more expensive than the sandwich factory even if the former is operated by a bot
You're describing how robotics has been. But we are on the precipice of huge changes in robotics driven by AI.
Yes, assembly line stuff will always be cheaper, and we'll continue to use a lot of mass manufactured stuff. But we don't always pick the cheapest option for everything. As custom options become cheaper we'll pick them more often even if they don't reach parity with mass manufactured options.
Is that a problem? It's a car, an ICE car's internals have been pretty much the same for decades. Except obviously the integration of electronics like the ECU.
Standardization of parts is good for the consumers, cheaper to build and cheaper to maintain.
The combined effect of focusing on assembly, outsourcing subsystems while needing to differentiate themselves leads to suppliers having more power. This worked while to volumes were high and predictable. Standardization is helping here now, especially while the future volume of any new product is still uncertain.
Probably both. If it doesn't make the cars cheaper, people won't buy them but if they can hold some of that savings for themselves, they will. This alone won't save enough to compete with the Chinese so maybe they won't get any of it.
It's happened to some degree for a long time. See K-cars. Automobile manufacturers having platforms with a fair bit of standardization across models isn't new.
I mean, no matter how many parts you share, you can still design a different dashboard shape, a different front fender, etc.
If 90% of the infotainment system is identical between 15 brands and the only differences are the bezel around it, the exact shape of the knob, and the coat of paint on the UI is that really so bad?
Costs just keep going up and up. People complain about it constantly. Anything to help make cars cheaper so they’re more competitive is a plus for everyone. Even if it’s only by a tiny bit.
Surely there's tons of parts on a car that could be picked from a small menu instead of such wide variety.
We certainly did fine back when all cars had sealed beam headlights and the choices were circle or the more exciting rectangle and two lamps with two filaments each or four lamps with one filament.
I could easily see standardization to a small menu of less exciting parts. Surely, every model still needs different wheels, but wheel hubs could be pretty standardized with several sizes.
I always wonder how much time and effort goes into designing and producing varieties of the same thing. Think of coffee machines. As the technology of making coffee didn't change much over the decades, all this effort goes into design and manufacture.
A non-OEM part for my Toyota is $50 on Amazon. I had to buy it local (because the car was already in the shop and we couldn't wait for Amazon to deliver it) from NAPA, it was $500.
The JAMA proposal for standardizing components in this instance is actually about materials. The proposal is for all three automakers to standardize their quality requirements for steel, resin and cables/wires.
Should have been done for decades, most car parts are basically solved, there is nothing less efficient than dozen of companies literally reinventing one by one, wasting millions to basically reach the same conclusions.
It's about economies of scale. If you're going to make expensive tools for parts, the more parts you can make from that tool, the better for your bottom line. That's the huge advantage Chinese companies have.
Not sure about other countries but in Pakistan, they are scammers, their local assembly plans produce 3rd rate cars, demand tons of money in return. The Chinese names like BYD and MG are taking the market share. I am glad
My gym commute time is half an hour by subway and 20 minutes with car. Today I thought to use car to shave that 10 minutes off. Bad mistake.
First, a driver was about to turn as I was catching the end of a greenlight... Let's just say I'm grateful to be in one piece.
Then, the navigation got me stuck in traffic for a train crossing. The train must have been 200 cars. I lost count. As I'm sitting there missing reading my ebook on the subway, I look around at the cars. A blue Kia hatchback with the new logo, a Mitsubishi, a few Toyotas, Hyundais.
I can't help but think these brands are already relics.
A trend under everyone's nose is public transportation, and non-car travel modes, have only gotten better. For the rest, you'll have public and private vehicles that drive you, there's car share, and what remains is a much smaller rural market.
What does each of these companies have, to respond to that? Shortages and cost overruns it seems, and not much else. Nokia was a household brand until it wasn't.
It's hard to imagine Toyota having that faith. The rest, I reckon many will fall. Don't you think?
No, I think your comment comes off as a bit out of touch if you believe that public transport is replacing the tens of millions of cars that hit the roads on a daily basis any time soon.
That would really depend on the country you live in plus the culture.
We have pretty decent public transportation in Qatar but people mostly go by car and we use a shit ton of fuel while at it. Around 3 cars average per household here and closer to 5 if you only include citizens. It's all car culture with plenty of infrastructure to support loads of cars.
A day pass on the metro costs just $2 but our fuel is also quite cheap.
Car sharing, robotaxis and whatnot will never outcompete owning a car. One gets you places, the other is a private mobile warehouse you own. It’s the same as being at your landlord’s mercy versus owning your own house. I can throw my junk into the car and have it there for a week if I want to, I have zero worries whether I damage interior when moving materials for removation, no worries if some scratches I didn’t cause would be blamed on me. I don’t want the car rental experience every single ride.
Non car travel modes are fine unless they’re not. I can ride a bike when it’s nice outside, but when it’s cold or raining I’d really rather get into a car. Public transportation can be better if the whole city is in a gridlock, but usually it’s not, and you’re locked into preset routes. When I’m going somewhere with friends I’d rather be able to talk to them freely without third patries giving me a side eye because it’s too early or too late or omg there are little children here you need to keep this pegi 8.
Let people own things, damn it. There’s enough rent seeking everywhere.
No disagreement with the rest of your comment, but rent seeking is not synonymous with offering a rental service. The latter is only rent seeking if the rental service depends upon some sort of government granted monopoly or regulation to prevent competition.
> It’s the same as being at your landlord’s mercy versus owning your own house.
This, 100%. Besides, car rentals are so expensive that if you need a car more than a couple of days a month, you are much better off keeping a cheap car. Uber and the like have also become insanely expensive.
E-bikes/related go a long way to shrinking a city, but the thing cars have going for them is that if it comes down to it, you could live out of your car. Hard to do that vs anything else.
In the US at least, the only public transport in most cities is bus. In my relatively small city, I can drive anywhere in town in 10-15 minutes. Bus is significantly slower, and doesn’t even reach my business, so I’d have to walk 45 minutes on top of the bus time. I’d be looking at 1.5 hours each way, vs 10 minutes by car.
Public transport is just an incredibly inconvenient option in many cities. Cars aren’t going anywhere.
In the UK Honda has just one EV with a range of 110 miles, after they discontinued their previous effort that had huge interest and hype (Honda E) yet they only gave it a similar range of approx 105 miles IIRC and so obviously no one bought them and it was quietly cancelled. I know let's repeat the same mistake!!!
At least Toyota have a range of more sensible EVs now in the UK, but they seem to be squarely aiming at the large (i.e. expensive ... Tesla Y, BMW x1 prices for example) SUV market where you're never going to compete to more premium brands in a Toyota (this is why they invented Lexus after all). Where is the 250 mile range EV Corolla or Prius for example?
Curious how it plays out for nissan given they're already just reading Renaults.
I used to only buy Hondas and Toyotas in the old days but now I've switched to other brands because they sell EVs that are usable.
Honda e was such a cute car but it was so inefficient, slow to charge and had bad software that even most of the cheap EVs China is dropshipping to EU are much better. It was really a 2012-type EV that was somehow introduced in 2020. Which could serve as an indicator how far behind Honda was on EVs at the time.
Think of this the next time someone tells you competition is good for consumers… sounds they could have brought down prices at any time, if they’d cooperated, hey?
But they could always have done it. That they only do it now means competition wasn’t enough to get them to try to make prices lower. Or that there was no real competition, prior to the chinese entering the market
Perhaps the next cost saving measure should be to remove the cellular modem that nobody asked for and that shamelessly spies on drivers. Unless, of course, Toyota et al. do in fact get a kickback from dealers, insurance companies, and data brokers for invading their customers' privacy. In some of the cars these companies make, you need to either pull a fuse (best case) or take the dash apart to unplug the unwanted "bug."
I think Chinese car manufacturers are doing this as well, so while I personally would never choose a car with that stuff in it unless I was certain I could disable it, I don’t agree that this would help their bottom line. Not until there’s a significant market for cars that don’t have spy tech.
I've always wondered why there are still 5-6 different window cleaner (i.e. Windex and equivalent). I would have thought we have figured the best product to clean window by now.
There is a part of me that wishes there was a supermarket with all-white boxes just labelled "flour", "shampoo" etc and that all cars looked the same.
More seriously, I suppose it's because you want competitive markets and products can vary along multiple dimensions like price, size, ingredients / composition, ethical claims, consumer targeting, etc.
“As more and more species fall victim to extinction, we face a grave crisis of decreased diversity, not only in America but across the globe,” Hargrove said. “But the good news is, these losses in biodiversity are more than offset by a corresponding rise in consumer-product diversity. Though flora and fauna are dwindling, the spectrum of goods available to consumers is wider than at any time in planetary history. And that’s something we can all be happy about.”
At that point isn't that going in the direction of "all humans should be the same"? no various scented soaps or certain types of flour better for certain types of baked goods that people prefer or even need (like gluten free)?
For a long time, that was kind of how Aldi (in the US) operated:
Need canned beans? Fine, no worries: Baked beans, black beans, pintos, red beans, refried, whatever -- they're all on the shelf... and they're all labeled with one of Aldi's in-house brands.
It was generally the same with the meat and the cheese and the produce and ~everything else, too. Ribs? Ribeyes? Fresh salmon? They probably had it, and there was definitely only one brand to pick from -- whichever one of Aldi's house brands fit that broader category.
(It's softened somewhat in recent years. Nowadays, I can select a block of [fucking-outstanding for-the-price] aged cheddar cheese with an Aldi house label, or a competitive product at a somewhat higher price with a Cabot label. They're stocked next to eachother.)
I just want product packages to be standard sizes and shapes, so that other things can be made to fit them perfectly.
eg. Breakfast cereal boxes should be small, medium, and large, regardless of brand (and "large" and "medium" should differ only in width). Then shelves and cabinets can be sized to fit the ISO standard cereal box with no wasted space. Same with dish soap. Etc.
You could always order your own chemicals and make your own. We have diluted our own hydrogen peroxide ever since cleaning products were unavailable during COVID. Lab supply stores will ship you 32oz containers of food grade ~30%. That plus the remainder of water on a 2 gallon container is basically cleaning-grade and lasts quite a while.
Higher percentage peroxide breaks down faster than low percentage stuff. You'll want to be careful with 30% (that is quite strong), and store it in appropriate conditions (if I'm not mistaken, a fridge)
General principle you bring up I agree with, but the example is interesting for this issue/reason
hehe yeah not the best example, let's replace glass cleaner with shampoo, toothpaste, soap, any kind of commodity product!
all these brands spend so much money in advertising just to convince people that their product (which is probably 95% the same as any other one) is the best.
Not to get all socialism on hn, but these kinds of products would be perfect for making publicly owned corps around. The kind of companies that won’t move production offshore so the shareholders can get a bigger payout.
FYI stannous fluoride is not usually the default floride salt (versus historic sodium fluoride), and you still have to consciously make an effort to seek it out.
HAP/c-HAP toothpaste is not readily available in retail where I live, and I don’t think I want to pay shipping for toothpaste.
I’ve also had good feedback from my dentist re: manual brushing and “essential” toothpaste (of which I have a national stockpile) so I will use that up before venturing into something exotic.
Asked a window cleaner what they actually use many years ago. The answer? Washing up liquid. Ye olde Yes/Fairy/Dawn/Salvo. So, we don't seem to have figured out the best product to use yet.
This is (was?) great for the inside of the windscreen - on cars with plastic dashboards the plasticizers evaporate out in the heat of the sun and condense on the glass. Vinegar and newspaper would clean that off really well, where window cleaner would mostly just smear it around. I was an especially useful thing to know if you were the sort of person who shined up the dashboard with Armourall every time you washed your car.
I'm fascinated you think the market will produce a best product and then stop. Most of what the market does is figure out how to sell people a shittier product at a higher price.
They made a bet on hydrogen, which was stupid, and they made a specific type of bet on hybrid, which was somewhat successful, but they never went all-in on that.
They are also quite behind on car software, like the Germans.
I bought a new car in 2017 with no electronics in it. This year a hose broke which lead to no power steering. I was still able to drive the car myself to the mechanic, who replaced the hose for 60€, including his time. I don't know if this kind of car still exist, but given the opportunity I'd make the same choice without hesitation.
The infotainment system gets at least an on/off signal from the car. That signal is a number that differs from brand to brand and even from model to model. So standardizing the infotainment also means standardization of the communication signals (at least some of them). Not impossible, but there are no incentives.
I think they are talking about engine and metal parts. Because a lot of other parts of a car is already standardized and manufactured by other companies.
Mazda and Subaru already uses a lot of parts from Toyota, so they might be looped in my default. They are not considered one of the major Japanese automakers in terms of size.
> The push to simplify and lower costs comes as Japan’s seven automakers, including Toyota, Nissan, Honda, Mazda, Subaru, Mitsubishi, and Suzuki, work to fend off the increasingly competitive list of Chinese automakers
So the question then is, why didn't they do this years ago? The answer is, they didn't need to, because they knew that you would spend a lot of money on a car. A captive market keeps prices high.
here comes the age of Japanese slop. make parts cheaper and work worse to keep margin.
worked with all of these manufacturers in Japan and the way they treat the suppliers the truck drivers tells you all you have to know about these brands and Japanese automobiles in a nutshell.
If Chinese EVs weren’t being suffocated by import bans and ridiculous tariffs in Europe and the U.S. these companies would absolutely be decimated. I watched a review today of a China made EV by Mrwhosetheboss and it’s absolutely insane how far ahead those cars are compared to the overpriced garbage coming out from the rest of the world.
The Europe EV tariff is so hilarious to me. They can't stop talking about the environment, make it hard for people to install ACs, and other sanctimonious bs. But when China offers a real solution, the do this, to protect their car industries.
Upon closer inspection there are things Chinese cars still can't do, most notably energy efficiency - it's not much of a concern in China, where there's infrastructure to compensate for that, but in other parts of the world it does make a difference.
If you look at the "one 15min stop" range, the first Chinese car to appear is the Geely-owned Volvo and only on the second page:
I dont think they are that far ahead if you compare it to european evs? They are just much much cheaper. But why should we as europeans let them completely wipe out the industry? Its employing millions of people here and if we manage it properly we can catch up eventually.
They’re (the Japanese makers) are getting cooked by the Chinese makers like BYD who make 75%-85% of their parts in-house[1].
Depending on the car, some estimates say that only the windows and tires are the only pieces that come from outside suppliers.
[1] https://www.electrichybridvehicletechnology.com/features/fea...
EVs are simpler than ICE, much less hybrids, and Japan has been infamously slow to build pure EVs.
So yes, but the drag is downstream of highly conservative product positioning not incompetence.
Hybrid transmissions are simpler than ICE transmissions. More complex overall drivetrains than EVs, they're intermediate complexity.
This is largely true of Toyota-style power-split e-CVT hybrids and series hybrids such as Nissan e-POWER, both of which eliminate (or dramatically simplify) the mechanical complexity of conventional transmissions.
Most other hybrid architectures are built around a conventional transmission and retain all of the mechanical complexity of an ICE drivetrain while adding substantial electrical complexity on top.
Subjectively, I think Japan was smart to not go full on EV, given the constraints they have; charging infrastructure, battery sourcing, and range. At the time when Tesla was selling under 500k cars (2020 and earlier) a year, there wasn't a problem with battery supply (they were able to ramp up). During the same time Toyota (e.g.) would be selling close to 10 million, and converting their customers to EV would cannibalize their own sales. Additionally, the current charging infrastructure can't even supply the EVs today if we add just 10% more on the road.
Even worst, if you're in California, the per mile price to charge an EV at home, without solar, is greater than filling up a hybrid Prius on today's gas prices.
If you don’t risk cannibalizing your own sales you risk other companies eating them.
Yes, but human emotions. Other companies are long-term external enemies. Cannibalism is treason within your own group.
The difference between the electric/gas price comparison depending on where you live is pretty wild. Here in Finland it’s completely the other way around - charging at home is about 1/10 the price of gasoline, assuming a relatively efficient gasoline vehicle. That’s just the cost of energy of course, EVs are expensive to purchase.
TBF it's much cheaper pretty much anywhere that isn't california. Their electric grid has been about as mismanaged as I think it's possible to be while remaining a highly developed country. But one example: https://en.wikipedia.org/wiki/Camp_Fire_(2018)#Infrastructur...
US gas prices are heavily subsidised by military interventions throughout the Middle East, and don’t factor in any externalities. On the other hand electric is massively abstractive and cheap electricity has major political blocks. Regulations and other punitive measures means US Solar panels cost twice that of Europe.
US gas prices are most heavily subsidised by domestic energy production since fracking was commercialised, military interventions havent been a major factor in the last decade or so
I’m looking more at the last 80 years as a whole. The manner of subsidy has always changed, but the subsidy remains.
Oddly though some types of energy as massively taxed. Taxation on solar in the US means that it costs 3-4 times the price in Europe and Australia. This is a political choice the US population made to have more expensive energy.
This is completely backwards. The oil companies did not support the Iraq war. Instability is bad for business and the war massively disrupted the Iraqi oil industry. You will not that oil prices rose sharply during the war years as well, it was a tax not a subsidy.
US foreign policy since the 70s and arguably further than that has been about keeping oil flowing, mainly from the Middle East.
Yet every intervention has had the opposite effect. At some point you have to admit the data doesn't fit the theory. 1973, less oil Tanker war, less oil Iraq war, less oil Iran war, less oil
In Canada, the Clean Fuel Regulations allow EV charging to generate carbon credits. Those credits can get shared, reducing the net cost of charging. I get a 16c/kWh rebate, and pay 20c/kWh to the utility. In Quebec, residential electricity rates are about 10c/kWh, which can make charging a revenue source.
https://solarsi.ca/credit-prices.html
Nissan sold the first mass produced (100k) EV from 2010 onwards, and still sells them, it had sold about 500k by 2020.
Same way it was smart for Kodak not to cannibalize their analog camera and film sales by migrating to digital.
> Even worst, if you're in California, the per mile price to charge an EV at home, without solar, is greater than filling up a hybrid Prius on today's gas prices.
Do you have a source for that? So all sources I find say that the energy cost per mile on electic is around 1/3rd than that of gas.
Yeah, it's not clear to me why people are just taking it as gospel that this will improve competitiveness. IMO it seems like it would lead to stagnation as it becomes more difficult for a single company to change anything.
Agree and disagree, a framework of standardized motor and frame, unibody or frame on body would be great.
Do we really need a new car to look cosmetically different every few years to spur sales and say “new?” At the same time this means they can still customize the sheet metal, for different trims and types but the motor is the same, transmission is the same, seat is the same, etc
And for those parts, do we really need new part numbers every year? Heterogeneous is great? But something something Henry ford you can have any color as long as it’s black is also ok.
Plus it isn’t really new, brand engineering is this. Toyota grabs the bmw z4 and makes it a Supra, Mazda grabs the rav4 and makes it the cx50, etc
Tesla has basically proven the answer is no.
And personally I think most cars have been getting uglier. I would’ve been happy if they stuck with what they had 10 years ago.
So yeah, if you wanna save money, stop wasting it on a new redesign every few years. Don’t waste the money retooling to change random things every year.
Tesla is an example of an actual opposite. Their best-selling model is the last one released, the refreshed Models Y and 3. Ones they try to keep selling year after year have been discontinued.
Wasn’t the last one released the Cybertruck?
Refreshed Y and 3 came out after the Cybertruck
wasn't the last one to release the cybertruck?
Trabant and Wartburg also have, long ago ;).
^ This commenter enjoys real cars
Those and 911 had proven it's an ok engineering decision and a commercial suicide at the same time.
For them to stay competitive as independent companies? Of course! Otherwise they look identical and have the same parts, and their only competitive difference is what? Pricing? On the same parts?
They might as well merge now and save the drama.
If they standardize internal components like tie rods, wheel bearings and battery trays, I doubt anyone would think the cars look the same. In fact, I think this would be great: standardise the jelly bean parts that don't really change much and don't see much innovation. There is absolutely no reason that different cars should use different incompatible 12 V batteries when the capacity is identical.
> For them to stay competitive as independent companies? Of course! Otherwise they look identical and have the same parts, and their only competitive difference is what? Pricing? On the same parts?
What makes you think they'd look identical? You think the only parts in a car are cosmetic parts?
> Otherwise they look identical
Hasn't this ship already sailed?
For me someone who does most of my car maintenance and repairs this would be very attractive knowing that parts were standardized and by doing so would guarantee that there would be a huge aftermarket parts marker since one part could target multiple models and this would mean competitive prices thus lowering the cost of repairs.
Still, however, as great as cheap available parts would be.. the major car brands desperately need to find ways to significantly lower the price of their cars. New cars and trucks are reaching the prices of like a big down payment you could put on a house. Standardized parts would definitely reduce costs but would that be enough? Even many 2 income households struggle to get ahead. In my opinion the number one priority of these companies should be how can they make an inexpensive car that the average person can afford.
Well, at least in Europe, the cost problem may be due to regulations and safety gimmicks. Look into the madness of GSR2.
> Do we really need a new car to look cosmetically different every few years to spur sales and say “new?”
The problem that I have with cars in general is that they use pretty old technology and you want something new that actually works OK and it does not have that much lag. While I understand the myth about manufacturers using old components because they are proven, they should get over it and use circuits made in the 21st century. Reliability has grown a lot, we don't need vacuum tubes in the cars anymore (I am being sarcastic about the vacuum tubes).
Another thing is the subtle but annoying differences in cars in different geographies: in one country you have a 360-degree camera system, but in others they don't even offer it as an add-on. For the same car. And other little things.
What I would like to see though would be to have the ability to upgrade the hardware in the car every 2-3 years. Like replace 2-3 "boxes" full of components and have "an almost new car" with improved technology.
I'd prefer them to keep using the old parts if they work. That way I am more likely to be able to take it to an independent garage who will have compatible parts, rather than taking it to the dealership & paying a premium as well as waiting for ages for them to ship the brand new part in.
> Reliability has grown a lot, we don't need vacuum tubes in the cars anymore (I am being sarcastic about the vacuum tubes).
This is a rather unenlightened take. The electronics used in cars aren't typical consumer gear - the parts are much more rugged. This is for good reason. The same car could start life parked on the side of the road in the nevada desert (wild temperature fluctuations), go on a roadtrip through death valley in the summer, and a few years later be parked on the street in florida (ridiculously humid) or somewhere in north dakota (extreme cold). Meanwhile we expect not to have any major electrical issues over a 20+ year product life. It's actually fairly absurd when you stop and think about it.
> The electronics used in cars aren't typical consumer gear - the parts are much more rugged.
Do you think they make regular and -Q1 parts on different photolithography machines from different silicon? Nope, the only difference is post production testing and price.
Car manufacturers have been doing this since the early 1900s. They call these designs “platforms” or “vehicle architectures.”
They might do a cosmetic facelift every couple of years but the platform will typically stay in production for a decade or so.
GM in particular are famous for using the same chassis, drivetrain, floorpan etc on half a dozen or more models across their marques.
I think it very much depends on how this is implemented. Some things simply don't need to have design changes almost ever because it it is a solved problem. Some things just need to share attachment points to be swapped with other or better versions. Like why do we need 20 different oil filter styles for 20 different cars? Why is one car battery 1/2 inch longer so it doesn't fit in another cars battery tray despite being the same capacity? Why do we need 20 different tierod ends on 20 different cars when a single design would work with 80% of them?
Several commentators mention batteries. Is this an issue in the US?
In Europe every car I've had has had roughly interchangeable batteries. There might be two or three different sizes for family petrol cars. That seems like a reasonable amount of useful variation for manufacturers to choose between when playing Tetris with all the components they need to fit alongside the engine.
Ferrari would use parts from other car companies. What Ferrari cared about was the engine.
Part of the reason Japanese cars had trouble getting a toehold in the Midwest is that American cars already had suppliers in common so it was more likely they had a set of rotors for your random Ford and they had to order them for your Subaru. That was also before people read some of the books on supply chains so those orders took longer.
if the US market thought it can compete or win certain markets then the door would be open. FOR: Smartphone, Software, AI models, EV Cars, Routers, etc,
The reason is because Cybersecurity is a priority for us and the Chinese are spying on us blah blah. I know for sure that cybercrime was no where as frequent as today, and with that not only is it from china anymore along with a much larger scale of intrusion and theft.
Is laughable seeing people from the US blaming their incompetence accusing others.
The thing is that China entered in your capitalized game and won.
Accusing any one of spying as a justification for your failures is kind of ridiculous.
The all powerful US creates sanctions, extreme protectionist and a lot of economic obstacles for everyone.
You guys are living in a dystopian world for ages. Your “free market” and free competition is an hallucination that you decided to believe.
The disasters the World had to accept in favor of the US “superiority” are far more terrible than you not being able to compete with EV.
For most parts, they are actually just (unnecessarily) designed to be not compatible so that the manufacturer will take profit from parts as well. Incompatibility becomes a feature for profit, not for anything else. This might actually be good for competition because now a small company can start with less money and standardized parts and focus on things they can actually make a difference.
the toyota/byd bz3[1] seems similar to the NUMMI efforts made in the 90s by GM/Toyota, GM seems to be doing similar things with luxury brands more popular abroad like GM/Cadillac[2] though there may be a wean-off for those due to tariffs
[1]https://www.reuters.com/business/autos-transportation/exclus...
[2]https://en.wikipedia.org/wiki/SAIC-GM
More background:
https://www.youtube.com/watch?v=ZjxZ2Eh9GrA
https://en.wikipedia.org/wiki/Gung_Ho_(film)
I don't think this is a parts story fundamentally. The Japanese are behind in electric vehicles. They are trying to survive using these tricks but unless they start getting serious about making EVs they are doomed.
In some markets, the US notably, electric cars are kind of a curiosity. I think the main issue is that, at the low end, the total cost of ownership of an entry level Tesla or similar is rather high relative to something like a hybrid Corolla. At the high end, electric trucks are insanely expensive and less practical than gas trucks.
An entry level Tesla is kind of a luxury car though. It costs twice as much as a Dacia Spring and Chinese models are much better value, or so I’ve heard.
It depends what you value. If you value software quality and UX too, Tesla still has a competitive offer.
Honest question: what do people need software quality for? What exactly are they doing with their cars that need all that in-car software? A phone attached to the center column offers a better software experience than any car maker could offer. Are people really paying that much to play games on their car screens?
No. I own a tesla and what I value is the integrated dashcam and sentry mode. Next comes route planning (which is gmaps under the hood but on a larger screen so easier to see). Energy information so that I can check how much I used and when.
> integrated dashcam and sentry mode.
Unfortunately, that footage does not stay on your computer/car.
https://www.drive.com.au/news/tesla-shared-private-camera-re...
This is common in every major chinese EV manufacturer now, maybe apart from rock bottom cost tier.
I've sat in my friend's 600 HP Zeekr few months ago and saw all you mention in some form or another plus much, much more than in my colleague's tesla 3.
That is if automaker supports Apple CarPlay/Android Auto. Tesla (and some other companies) does not.
It’s more about having something that works well than a crazy feature set.
For an EV, planning a longer route where a charging stop is needed.
Ideally that should work to your preference, for example a restaurant vs fast food nearby.
We're in a transition, but in the near future you'll need you'll plan less and basically just stop when you need to.
The capital cost of an EV charging station is absurdly low (compared to say building a gas station) and returns are high value with zero effort.
In other words they're a high return profit center, which means that pretty much every place which is aimed at "passing long distance traffic" will get one at some point. We're already seeing this play out a bit, but in 10 years they'll literally be everywhere.
Tesla also comes with massive political baggage in the form of Musk.
His interference in elections and the war in Ukraine hasn’t gone unnoticed in many markets. Tesla comes with weaker residual value because of the brand damage.
Now that other manufacturers are moving away from soft-screens towards tactile controls software UX is much less important too.
Personally, I’d much rather have “knob per function” than have to go menu diving through a GUI at 80mph.
There’s many great alternatives now that really are great value. i.e. Renault, Nissan, Skoda, VW, BMW, Dacha.
And politicians associated with Chinese makers are clean as a whistle?
I've got no love for the cringe machine that is Elon, but c'mon. Would people really buy from a Chinese maker over Tesla based on some kind of political stance?
That’s a good question that I can’t answer but for the sake of argument there’s plenty of other EV manufacturers in the European EV market at least.
Yes
At least regarding Denmark, Chinese leaders and EV CEOs haven't threatened to invade the country.
Personally? Absolutely!
The Chinese haven't been spending a lot of money to support right wing authoritarian governments in my country.
Buying Tesla does. So you don't have to be "clean as a whistle" to be a massive improvement.
But they are heavily supporting Russia which is definitely spending money to support right wing authoritarian governments in you country.
Worse than Musk? Probably not. Better than Musk? Also probably no.
Musk is also supporting Russia...
What a load of bs, people have the attention span of a fruit fly. Saw one clown put a sticker "I got it before Elon went crazy!" on their Tesla in Copenhagen, but that's about it. Danish are buying Teslas like there's no tomorrow.
Danes are buying EVs as fast as they can before a possible tax increase next year, but preferring European and Chinese vehicles where possible.
If they can't get something else, they settle for a Tesla.
Tesla had a 0.8% share of EV sales in October 2026 in Denmark.
> Tesla had a 0.8% share of EV sales in October 2026 in Denmark.
Is this figure really for EVs only? I don't find this article[0] absolutely clear, but in context it seems to be referring to Tesla's share of all passenger car sales:
> Norway remained a bright spot for Tesla. The carmaker recorded its best October on record and was the country's top-selling car brand with a 9.8% market share, according to OFV. Chinese brands continued to expand their footprint, accounting for 22.5% of new passenger car registrations, their highest monthly share on record.
> [irrelevant quote]
> By contrast, Tesla's market share in Denmark was only 0.73%, behind BYD (002594.SZ), Leapmotor (9863.HK), Xpeng (9868.HK), and SAIC-owned MG (600104.SS), which captured between 1.6% and 5.5% of the market each.
[0] https://www.reuters.com/business/tesla-registrations-surge-a...
I think you're correct, but with EV sales at over 80% of car sales in Denmark it doesn't make much difference.
Thanks, I hadn't realised the EV market was that big. You're of course right that the difference is therefore very small.
I drove a VW ID recently and you have plenty of physical buttons everywhere you look as the driver, yet some important features are behind the touch screen.
If you ignore the ongoing nazi car brand aspect, which is pretty hard to I agree, I am not convinced the traditional car brands you mentioned are better value. And they have a nazi past too. But that’s a while ago so it’s okay.
Dieselgate stochastically killed a lot of people recently.
OK, if don’t like German car brands because of their past there’s still Renault (French) and Nissan (Japanese).
Both have reasonably priced, well engineered EVs in their range now.
Both use Android Auto and IMHO that works very smoothly and without jank. Plus they have physical controls.
Personally it’s a company’s present and future behaviour that I care most about rather than stuff that happened in the 1930s and 40s no matter how horrific.
I'm not sure Renault is a strong improvement in terms of nazi collaboration.
You do you, the Nissan Ariya or the Renault Scenic aren't that bad indeed.
Support the free world: Just buy European. Or a Japanese (I don't like those so much).
The US and China can go play their rivalry and soft and proxy wars somewhere else.
Also European: Chat Control, DSA
There's very little difference between Tesla and BYD day to day. I'm also going to have Android Auto open virtually all the time so couldn't see any difference.
I think Tesla doesn’t have Android Auto or Apple CarPlay. I have never driven one, but that’s what I read.
Hahaha, I've been in Teslas many times (but not as a driver) and thought I'm seeing Android Auto. Which I guess proves my point.
I mean, for most people, you put Spotify/Audible on, switch to the map, go. There's a hard limit on how much things can change.
I'm under the impression that even among the outliers that are people who buy new cars instead of used, most buy cars because they need to go places. How many of those are willing to shell out an extra 15k or so for something as vague as software quality?
I would never pay twice the price of the car for those, and tesla has made some properly stupid hostile UI decisions like moving turn lights into steering wheel.
Plus tesla is poisoned by nazi owner who is extremely hostile towards Europe for whatever reasons and feels like he needs to interfere in global politics, that brand is burned for good regardless of products. Something about having actual morals and spine and voting with wallet and not supporting evil actors if you don't have to.
> An entry level Tesla is kind of a luxury car though.
It's a luxury *price*. It is not luxury *quality*.
They're pretty crappy cars for the price, lots of flimsy plastic and bling.
I have owned a Tesla for a year but have now switched back to petrol simply because of range. I’ve spent way too many hours at fast chargers. And this was in the Netherlands and Germany. US distances are typically much longer from what I understand.
You should also realise you are the outlier. Most people travel far less than the range of their vehicles (petrol or EV).
This does tie into a good point - EVs get surprisingly expensive if you charge away from home.
The price difference between home charging vs a fast charger can be extreme, 6-7p/unit vs 80-90p/unit.
I exclusively charge away from home since I don't own a wallbox. I also regularly drive from north Germany to Switzerland, in my model 3 Highland that means 2-3 charge stops. Which I would do anyway.
Usually I charge when I go grocery shopping. I can't remember the last time I drove to a charging station just to charge.
Yes but this too is temporary. If you think how much cheaper it is to install a charging station than a gas station there is no reason competition will not drive down prices in the future.
Whle I obviously can't know exact GP's situation in particular, statistically speaking they are not necessarily an outlier, for the region they are from.
Typical Dutch driving pattern is strongly bimodal - a lot of everyday short trips (think commuting), plus several holiday trips per year - Austria, south of France, Italy, you name it. That would be the trips where "too many hours at fast chargers" would be a problem for me personally.
The fact that most people only drive a few miles most of the time is true exactly like most people don't have house fires most of the time.
It's a true statement, they don't. Yet everyone, not just people with jobs and hobbies that cause fires, still needs smoke alarms and fire extinguishers and building codes that demand multiple exits from bedrooms etc.
This "outlier" argument that a lot of people think makes sense, doesn't. It's completely invalid. Most people could actually get by with a golf cart most of the time. Except no they can't, because most of the time isn't good enough.
Your argument is funny to me because we don't have any regulations here for those things.
In my house there are no smoke alarms, or fire extinguishers, and all the bedrooms have a single exit. And I'd say we're pretty typical in this area.
Which is not to say those things wouldn't be a good idea, it's just that the attitude towards house fires may be more local than you assume.
> US distances are typically much longer from what I understand.
Ehh that's complicated. They're much _much_ longer once you get out into the sticks. In the suburbs I imagine it varies. But in urban areas AFAIK they're fairly similar and as it happens those are the areas where you benefit from EVs the most while also being where people with highly paid jobs tend to be located.
I do 35,000km a year / more than twice the average in the U.K - and have used a fast charger 5 times this year.
Out of interest how much range do you need?
BMW just launched an i3 with a 567 mile range. Is that enough?
Personally I think I’d be pretty happy with 300 to 400 miles.
Range will increase over time.
There’s still lots of efficiency improvements to be made like replacing the motor, differential and breaking systems with in-wheel combined brake/motor units.
We will get to a point where EV range is greater than on ICE cars.
> replacing the motor, differential and breaking systems with in-wheel combined brake/motor units.
There are a lot of drawbacks to this strategy btw. Unsprung weight gets a lot worse, and expensive high voltage parts become much more exposed to elements and shock loads. The benefits seem unlikely to outweigh the drawbacks for most applications.
> Unsprung weight gets a lot worse
Not necessarily. Where it gets interesting are the prototypes with lower unsprung weight than the equivalent braking system.
They’re not there yet but it shows there’s definitely new avenues to explore.
I don't own a car, never have, but for everybody I know who has an EV (in the Netherlands) this is not an issue at all. After you need a recharge people need a coffee break too, and 20 minutes fast charging is enough to get you there. Maybe you have different needs or don't take breaks from driving that much?
I don’t know about Europe, but it’s quite typical in the US to drive for 1-1.5 hours for a regular commute. I drive to grad school 2-3 times a week for ~50 minutes typically for example, can easily be an hour on some days, no stops at all because that’s a relatively short distance. For longer journeys, we typically don’t stop except maybe every 2-3 hours. We would only stop for 20 minutes or more for a lunch break, not coffee, and once in the middle of a 5-8 hour road trip with smaller 5-10 minute stops sparsely placed.
This sounds very strange to me. My Model 3 goes 550km on a single charge. I use the charger at home and charge it like my phone. I've used a fast charger twice in 3 years, only as a curiosity.
I'm guessing maybe your problem was that you live in an apartment which doesn't provide a parking space with electricity, so fast charge was only option? Definintely an issue, especially in some countries where the usual home isn't a standalone single story like Australia where I live.
The US banned the import and sales of chinese EVs like BYD. Who knows what american roads would have looked like otherwise?
Only 16-20% of cars on the road in the "u"s are trucks, so not really relevant anyway.
I'm pretty sure the Ford CEO owns a Chinese car
Roughly yes:
https://finance.yahoo.com/sectors/technology/articles/didn-t...
But the rules may differ for those of us who are not major automotive CEO's.
For sure and kinda understandable (i get - i just don’t get it, like the gun thing). But Toyota does sell different cars for different markets, why can’t they EVs for markets that want them. It took them 1.5 decades to make EV that’s finally competes with others makers.
> I think the main issue is that, at the low end, the total cost of ownership of an entry level Tesla or similar is rather high relative to something like a hybrid Corolla.
The problem there is you're comparing a Corolla to a Tesla and not e.g. a Chevy Bolt, which has a lower TCO than both.
> At the high end, electric trucks are insanely expensive and less practical than gas trucks.
There is a reason companies like Amazon use electric delivery trucks and it's not because they're impractical.
The main issue with trucks is that to give an electric truck a reasonable range when hauling a load, it needs a much bigger battery, and then to justify that you have to be actually using it as a truck full-time rather than as a truck-shaped car. Which is fully justified when you are, because then the fuel savings are enormous.
Whereas the people not really using it as a truck don't really need the bigger battery and then it doesn't have to cost that much. And even that isn't going to matter if the battery prices keep going down.
The other option which the US companies seem to be leaning into is to use the smaller battery and offer a range extender that runs on gas, which is a hybrid in a sense but it's more like an EV with a slot to put a gas generator.
> There is a reason companies like Amazon use electric delivery trucks and it's not because they're impractical.
Right. It's subsidies/incentives. And, of course, operating within the legal/governance structure, you can 'fine' the vehicles you don't like - have special clean air zones with fees for entry, high tax for oil/petrol, etc.
I hope you didn't mean this was something to do with costs. It's just the government using licensing, laws, taxes, etc to direct proceedings as they want - nothing to do with the underlying costs.
Large delivery trucks get like 10 MPG when they run on gasoline, and even worse than that in stop and go. Operating one full time puts its fuel consumption in the tens of thousands of dollars a year. Eliminating two thirds of that by using EVs pays for itself straight away without any subsidies.
> I think the main issue is that, at the low end, the total cost of ownership of an entry level Tesla or similar is rather high relative to something like a hybrid Corolla.
The main issue is that the US effectively bans imports of electric cars from the most efficient suppliers on the planet.
If EVs are "curiosity" in the US, it's dead. I think almost all the countries EVs have been successful are places that have lower population densities than the global average(not G7 or European average), including the US and not including China.
TCO in Europe for EV is beating ICE for a while now, that isn't the case in the US? Why not? Is it because Americans like big inefficient cars more, or is gasoline that much cheaper?
Also larger distances, and everything laid out inefficiently with bad zoning. Basically motor-lobby ruined it for them.
Just bought a PHEV (Peugeot), and if you can charge at home it runs rounds around ICE cost-wise, eves with it being relatively power-hungry compared to some alternatives (but so comfortable and sleek). With public charging it is marginally cheaper than ICE, pricing of public charge points swallowed the price advantage, but I guess it is not free to build that infrastructure, so its okay I guess.
> I think the main issue is that, at the low end, the total cost of ownership of an entry level Tesla or similar is rather high relative to something like a hybrid Corolla
Atlas Policy has the 2024 models within a few grand of each other at 7 years. It's not significant and the Tesla is a much nicer car. Hybrids are expensive to maintain.
It means firing a lot of people (labor intensity of EV production is much lower) and Japanese automakers can't do that for a multitude of reasons. They are cooked, they will just go out of business. Fast.
Germany is currently going through this transition. It will be interesting to see what happens.
They are just failing, not transitioning. Old factories and brands closing down, new ones not appearing, people retiring or becoming jobless. Unions prevented transition.
What does that even mean? They’re definitely not making their chips in house they can’t be making their vision systems in house. Even the wires, I don’t think BYD is making its own wires. Unless I’m completely wrong and BYD is just that vertically stacked.
They're definitely making their chips in house, see BYD Semiconductor Co Ltd. Just not all their chips. And they have a subsidiary making sensors.
> Depending on the car, some estimates say that only the windows and tires are the only pieces that come from outside suppliers.
Until they grow big enough to make their own glass.
For tires it does not make sense to integrate that too. Unless someone has the bright ideea to sell unconventional sizes, like 18.2" or something crazy like that.
This take is somewhat off. The basic context here is that Japanese automakers experienced tremendous supply chain stress due to recent geopolitical events (such as the US-Iran war; you should remember the Strait of Hormuz crisis!)
So JAMA (Japanese automakers’ industrial association) asked what they could do. Their answer was to standardize basic components so that they could reduce bottlenecks.
If everyone uses the same parts and components, wouldn't that put even more stress on their respective supply chains in times of crisis? I feel like it would be better to diversify parts and their production more globally, to become independent of individual geopolitical hotspots.
Standardizing parts does not imply centralizing production. That may happen due to the inherent pressure to monopolize things, which companies seem to face, but they are orthogonal.
If there is cause-effect relation, are they actually orthogonal?
The cause effect is unrelated to standardization here. Having 2 different types of steel each of which have a single supplier is not meaningfully different than having 1 type of steel and a single supplier.
If you have 10 suppliers all making the same wind screen wiper motor it's obviously better and cheaper than 10 suppliers all making different versions of essentially the same thing. You might argue that this will eventually lead to fewer suppliers because one will manage to undercut the others. Maybe it's on the car manufacturers to source from a wider net even if things are slightly more expensive to keep a stronger ecosystem.
The parent comment is schematically correct. Right now each automaker uses its own quality standard for steel. So it’s non-trivial for a steel plant to supply materials to both Toyota and Honda.
Note that the scope of standardization is fairly limited at least for now. JAMA’s initial targets are steel, resins and wires.
It's curious that the Japanese OEMs are so far behind on this.
Are they? Western OEMs are jack welch asset light businesses that just assemble vehicles from tier 1 suppliers. A tier one supplier even owns the final assembly plant for one Mercedes model. All mercedes provides is the badge and mountains of paperwork.
The german ones at least are very heavy on industry standardization, they have their own ISO/DIN-but-for-cars (VDA), which inspired equivalent standards now used by Chinese OEMs.
Industry standards are paperwork companies, which doesnt inherently imply they actually manufacture anything themselves. And usually standards are heavily tied into FMVSS or EPA regulations. Lots of busy work with nothing produced, but it sure employs a lot of politicians relatives.
>If you have 10 suppliers all making the same wind screen wiper motor it's obviously better and cheaper than 10 suppliers all making different versions
That's a non sequitur. At least unless the whole world switches to the same standard or they all only had one customer to begin with. If those suppliers have to change, adapt or extend their production to accommodate a standard while still shipping their original product to other customers, the end result will be more expensive. And it would have done nothing to relieve the geopolitical issues brought up by the parent comment.
Wait - you're saying that because they all change their product, that even though their market size jumps (they don't sell to one car manufacturer, they can sell to all) that that automagically increases costs?
Can I introduce you to peaks, troughs and shoulders?
You're likely to respond that the market stays the same, because its now split up by the wiper manufacturers that were creating specialised systems - fair.
Except nobody is ordering in an even cadence across the year, most orders will be higher at some points, and lower at others. And, the success of a given wiper manufacturer would be coupled hard to the success of the car (model[s]) they build for.
Now, the wiper manufacturers will be able to plan their output, coupled not to a given model(s) success, instead to the Japanese car industries success overall (less variable, still not deterministic though, to be fair)
That brings us to the peaks and troughs section - they dont have to have capacity for the peaks, which goes to waste (idle plant/staff) during the troughs, instead the other customers will fill the shoulders (more even output)
That's significant cost savings for the homogenised (wiper) manufacturers, with the one off cost of refitting their lines (which will be cheaper to do than normal because... multiple of them will be doing it...
>even though their market size jumps
Why would it jump? Overall demand doesn't increase under the given assumptions. They'd be selling the same thing in a different form. Producing more forms costs more money.
> (they don't sell to one car manufacturer, they can sell to all)
And also:
> You're likely to respond that the market stays the same, because its now split up by the wiper manufacturers that were creating specialised systems - fair.
> Except nobody is ordering in an even cadence across the year, most orders will be higher at some points, and lower at others. And, the success of a given wiper manufacturer would be coupled hard to the success of the car (model[s]) they build for.
Please try to have an honest read before misrepresenting posts.
Which one is easier to get, a USB-C cable or (insert esoteric cable config)?
OTOH, once you have a source for "USB-C cable" / "(insert esoteric cable config)", which one's gonna be more reliable experience ordering repeatedly?
Chances are, the esoteric crap comes from one plant and has one major customer, so every bit is gonna be the same.
With USB-C cables, Who the fkkk knows what you'll get? The only bit guaranteed identical between two USB-C cables is the connector shape. Everything else is lottery.
At this point I think EU should introduce a mandatory labeling scheme for USB-C cables, so that each cable is stamped both on packaging and on the cable itself, with the very same stuff USB-C cable tester shows it. And since the "better" cables have chips on board, we could enroll them in the same "Battery Passport" / "Digital Product Passport" thing, with steep fines to all the importers or resellers who waste people's time selling fake cables.
> which one's gonna be more reliable experience ordering repeatedly?
Conversely - in the esoteric world, if the manufacturer is disinclined to produce "quality" - what exactly are you going to do about it?
Just imagine the Apollo 13 carbon dioxide scrubber cartridge situation, but it's literally for 30k parts. Of which ~10k are ICE related.
(so, an EV without powertrain may have up to 30% less parts, or as many as 70% as an ICE. not like 10x less, at all. And this is before adding back in 7000 battery cells each made of few parts and the motor itself so... the parts count is actually the same? Interesting)
Toyota decided after the events of Fukushima that their supply-chain has to be way more resistant against external events. I assume they build up up to 6 months (I even remembered 18 months, but couldn't find evidence) of parts to make sure their production is not falling apart.
The fukushima plant workers performed incredibly during the disaster. They harvested batteries from the parking lot and used fire engine pumps. An excellent example of anti fragility.
Funny how BYD has the inverse strategy of German car makers, who are obesessed with fossile fules and make absolte nothing in-house. They are cooked.
BYD motors are made by borg warner. The chinese outsource plenty.
The only strategic difference between BYD and the European auto makers is that BYD has decided to price their cars competitively whilst the European auto makers have decided to buy each other so they don't have to compete in price.
The Chinese makers are heavily subsidised both by stealing process from Tesla and just plain old cash ($230bn since 2009) and also the ingenuity and hard work of the Chinese people. Beijing even promoted an Audi engineer to be in charge of developing EVs and supporting the businesses, we have nothing like this in the west to cut through the layers of bureaucracy in the way of doing anything useful.
But yes I guess building everything yourself cuts out the middle man but obviously if the Japanese government spent $10bn (probably in Japan more like $20bn purchasing parity) into subsidising electric vehicles parts, robotics and supply chains I'm pretty sure it would have helped. Instead the Japanese government invested about 1/10th the amount of the Chinese.
My point is saying sure the end result could be vertical integration, however it's a million different things they did and number one was getting the right person into a position of power rather than a corrupt politician.
>The Chinese makers are heavily subsidised both by stealing process from Tesla
Elon Musk himself claims, "you are free to clone our satellite and car manufacturing; we only file defensive patents"
To be fair, Musk did not sue BYD, despite some widely considered clones of his cars and processes. Other manufacturers did. For example, in the EU, you can't sell the BYD Ti7 because a court ruled it violated Jaguar Land Rover IP.
He says all sorts of things.
He also said the same thing about their space rockets. I mean generally, China can steal what it wants, but anyone that wants to work on those kinds of things needs approval from their government and replicating anything that SpaceX is doing requires a level of discipline and process that a lot of companies won't be able to match. That said, I'm not sure that all of the why's of internal SpaceX decisions are public, and simply copying something without understanding the why's is probably a good way to end up with things that don't work once you're 1000 decisions deep into what you're doing.
Really what I took from his statements was an emphasis that good execution is harder than you think at the same time as his personal philosophy is shifting to like, machines will make everything so people's personal stakes in their own investment will be discardable. I don't know, he is both very wrong sometimes and a force of nature, so it's anyone's guess.
There’s a fairly good chance that had Japan provided funding to the likes of Toyota they would have used it to increase their funding of climate denial, anti-EV disinformation campaigns and boondoggles like hydrogen passenger cars to distract from mass roll-out of EVs.
I’m very concerned about ceding auto manufacturing to China as we are doing, but as you say there have been a lot of factors involved and some of them very much self inflicted.
The industry knows by now how to build cars.
Pointing out Tesla feels overstated.
There are pros and cons to the massive subsidies approach, but it's not magic and in a way they've been selling their limited assets off in exchange for a strategic trade imbalance that achieves neither the employment numbers they want or the sanction proofing insulation they wanted to establish before flexing in their region. In these advanced industries, it's basically a mathematical impossibility for them to erase all import dependencies, but they have done a lot to "control the means of production".
So good effort and they got some influence, but they're still left with the cons of this approach which unfortunately also means the rest of the world has to deal with it too. Regardless of their strategic aims, COVID gave people advance warning of the fragile way things have been restructured and also accentuated how insane China is in an undeniable way.
We could see Japanese automakers standardizing as primarily a cost savings, but in a way Japan is also trying to get industry ready to pivot to military manufacturing if needed the same way we have seen in some cases in the US to better prepare for World War 3. Japan is a critical component of that, because the US needs flexibility in how it interacts with China right now and Japan is helping us extend deterrence. Japan really is amazing and what they're doing is thankless.
That may or may not be one component to what the automakers are doing, but it would probably not be a popular thing to promote publicly in Japan, because of their culture. It will also be riskier in World War 3 than in World War 2, because these plants are big targets that aren't hard to hit in today's world so I think it would largely be a temporary strategy up until any conflict escalates to the point where plants are being attacked if so.
In terms of hiring, the CCP isn't unique in having engineers/technically literate people in charge of companies, you could argue it's pretty much the norm across the auto industry with some exceptions so I don't understand the point you're making there.
I think there has been hardcore China scaremongering in the auto industry for some reason, which I feel like has brought people on board with it (and unlike other doomsday trends, this has resonated in Europe ). I feel like the narrative is not even nearly true if we look at the evidence:
https://en.wikipedia.org/wiki/List_of_automotive_manufacture...
This includes China afaik. Japan is winning so much its not even funny. Besides, every car review of a Chinese car I've watched goes like this: great interior quality, low price, tons of extras (some of them weird), but the car is generally weak on 'core' specifics - ride quality, real-world efficiency/charge speed for EVs, interior space efficiency, ergonomics.
I think that exposes a couple things - I can get a door handle at a hardware store for like 8€ - it'll be made from metal, finished quite well etc etc. So putting in the widgets into cars that make an interior feel great doesn't cost that much, and people care about it a lot. Existing manufacturers have engaged in market segmentation based on this, but the Chinese saw this as an easy win and took it. That's one of the reasons why Chinese cars seem a lot better than what they cost.
Do most of the people care? It doesn't feel as nice, you still get from A to B and have shiny screens, that is all they want.
The one thing I do not want is a shiny screen...
People don’t understand how many families can’t afford cars for their teenagers. If those people can even get 1 more car and share, that means more people will go places, do things, lead to economic activity. Trains are of course the best case for this, but in much of US suburbia, a car is a necessity.
> charge speed for EVs
I keep reading about new breakthroughs they make in charging speed including 1MW networks. Do they not translate to real world models or just not to the cheaper ones that people tend to buy?
> Japan is winning so much its not even funny. Besides, every car review of a Chinese car I've watched goes like this: great interior quality, low price, tons of extras (some of them weird), but the car is generally weak on 'core' specifics - ride quality, real-world efficiency/charge speed for EVs, interior space efficiency, ergonomics.
This is the most out of touch take I’ve seen.
People simply don’t give a shit about that. China is taking over literally every car market they’re allowed to compete in. People want a good car that is not expensive. China has those in spades.
Toyota did this to themselves though. Everyone was waiting for a Toyota EV, and they've just under-performed by a huge margin. It was all meant to be solid state Lithium batteries which are still "coming" maybe 2027 (I doubt it).
Which is why I now own a BYD.
In the past three years half a dozen Chinese automakers have entered the market where I live. Do they all use standardized parts, e.g. brake pads? Where would one get e.g. a DongFeng axle bearing if that part fails?
I was actually hit by a DongFeng almost a year ago. I'd love to know where they got the new grill and bumper cover from, and how long it took.
No, but the point is not standardization, it’s that doing everything in-house saves them a lot of money.
So Japanese car manufacturers need to figure out some way to stay competitive. Standardizing parts is one way to do that.
Ford and GM have been doing this since 2002 with the GM–Ford 6-speed automatic transmission [0]. The companies worked together on the design and ultimately worked with Allison Transmission on its manufacture.
One key difference between each company's implementation had to do with the shifting solenoids and the electronics. But as far as I know the actual clutch pads and gearing were the same.
[0]: https://en.wikipedia.org/wiki/GM%E2%80%93Ford_6-speed_automa...
> Ford and GM have been doing this since 2002 with the GM–Ford 6-speed automatic transmission [0]
All the manufacturers have been doing it since even before that, with major items like engines and transmissions.
What they haven't been doing is standardising all those other parts that need replacing. For example, standardising on the wheel hub+knuckle for 15-inch, 16-inch, 17-inch and 18-inch wheels will let wheels of the specific size use the same disks, calipers, pads, balljoint, wheel bearing, CV joint and all the sensors (wheel speed, brake, etc).
I see no reason why two different SUVs on 17-inch wheels need completely different brake pads shapes, when both sets have the same surface area, require the same performance profile, etc, but that's what we have now.
You can do the same with almost every mechanical and electrical subsystem in a car, and still have a large variety in cars produced. After all, car manufacturers don't manufacture their own tyres and batteries, do they? They don't manufacture they own wheels.
Even the things that are specific to them, they outsource anyway - they don't each have their own windscreen manufacturer, they outsource that. The already outsource all the glass, all the oils and fluids, all the pipes, etc, it's jus that they produce incompatible designs so that the actual parts manufacturer has to charge a jig setup fee for each of them. Standardising on parts brings in economies of scale.
> I see no reason why two different SUVs on 17-inch wheels need completely different brake pads shapes, when both sets have the same surface area, require the same performance profile, etc, but that's what we have now.
Because an SUV that has 17" wheels can weigh two tons or three tons or more. It can do 120 mph maximum speed or it can go to 160 mph or more.
The math changes really fast when it comes to stopping that SUV down based on those two parameters alone. You can see why different calipers, how many, brake disk size, type (ventilated or not), different sized brake pads.
>> I see no reason why two different SUVs on 17-inch wheels need completely different brake pads shapes, when both sets have the same surface area, require the same performance profile, etc, but that's what we have now.
> Because an SUV that has 17" wheels can weigh two tons or three tons or more. It can do 120 mph maximum speed or it can go to 160 mph or more.
Didn't I address this objection in advance with the words "performance profile"?
Right now, 95% of SUVs have the same brake performance requirements: under 4 ton, under 160mph, etc. There is no cost saving in making an entirely different wheel assembly for SUVs that require under 3.99 tons and under 159mph, which is what the current manufacturers are doing.
> Didn't I address this objection in advance with the words "performance profile"?
I did not understood your statement like that.
I don’t know about cost savings, but most likely it is about design decisions regarding how a wheel should look like (brake calipers in front of the wheel, in the back).
> most likely it is about design decisions regarding how a wheel should look like (brake calipers in front of the wheel, in the back).
It's irrelevant in 95% of cars. All of the things I specified are irrelevant in 95% of cars.
Makes sense, it's probably the only way they can actually compete with Chinese car manufacturers.
I feel like the title is misleading on the impact, it's actually all of the big players
> The push to simplify and lower costs comes as Japan’s seven automakers, including Toyota, Nissan, Honda, Mazda, Subaru, Mitsubishi, and Suzuki, work to fend off the increasingly competitive list of Chinese automaker
Both Nissan and Honda are already showing that they can't compete.
Nissan is losing money, closing factories, ending model lines, and tried to merge with Honda last year.
Honda had its first annual loss since 1955 and they have no EV lineup.
If there’s a company that needs new management, it’s Honda. I know they’re an engine company. But the company could never be more than a tiny, tiny shadow of itself if they don’t offer EVs.
They waited so long. They finally did it, with a rebadged GM because they don’t have the time to make one themselves, and it was popular. So they canceled it?
You’re way too late to start making your own, and they don’t even want to do it.
It’s like they think choosing to have a corporate Viking funeral and just burn the place down is the best way to honor their legacy. It’s nuts.
I don’t understand why they invested a lot to make EVs before completely giving up and leaving the market.
Nissan bet on EV and coolness like Tesla, and lost, basically. Toyota won cars with hybrid. That's what happened.
Nissan most definitely did not bet on "coolness like Tesla". They bet on EVs as non-aspriational economy cars long before a market for them existed.
Friends I have here in Europe that are TCO-conscious are buying toyota corrola or yaris and not EVs. You know they are reliable.
Folks who can afford to shell out a lot of money for a car every decade at most can't take risks with unproven tech just because it may seem cool.
And Daihatsu!
Daihatsu is Toyota.
This will not matter when people have no jobs. How are the people without jobs/incomes going to pay for all of these cars and fuel?
Did jobs disappear forever after we invented the plow?
If there hadn't been an industrial revolution to soak up displaced farm labour things would have been pretty torrid when mechanisation hit Ag. thing is.. this time round there's a huge risk of displacement to automation and not many jobs the other side. Risk, not certaint.y
The displacement of farm labour things is what created the Industrial Revolution.
What displaced farm labour?
Many jobs have disappeared forever because of technical advancements. I'm not sure what point you're trying to make.
I think you just made it for me. Some jobs disappeared but jobs in general are here to stay.
Anthropic employees said AI will kill everyone.
At most a few employees, out of thousands, said that. Why would you attach any importance to what a couple of doomsayers said?
The plow very much did make some jobs obsolete. As did the power loom, and the washing machine, and the automobile, and many combinations of machinery in manufacturing and processing industries.
The objective and effect of the plow (and practically every tool humanity has ever made) was to improve the efficiency and efficacy of a single task. The objective of the AI hyperscalers is to create a tool that is capable of doing any arbitrary work. They want to abolish human effort as the last possible economic problem to solve - similarly to how cryptobros proselytized about the monetization of everything forever, hyperscalers are sticking their tech everywhere they possibly can to try and find places where it extracts money.
The argument this time around is stronger as the fundamentals are simpler and more practical and not a pipe dream. Cryptobros argued that you could "own" anything, as long as you and every other person alive agreed to jump through the stupidest hoops ever concieved and were fine with not actually owning things in any conventional sense and also you connect everything in the world to the internet because its Really Important™ that proof you bought a pack of gum is duplicated on millions of computers simultaneously. There are endless critiques of Web3 and crypto, but they all generally boil down to infeasibilty. The AI argument lacks this issue; real tangible work is being done profitably right now by machines. The uses of these machines can potentially be cheaper than paying a person to do this work. The work done may be done faster or better or cheaper (or some set of these) than if a human does it. Economic players recognize its potential value and are frothing at the mouth at the idea of never having to pay a person to do any work ever again. Employers don't want to pay people because people are generally their highest cost, and eliminating them for a cheaper alternative is their goal, and an economic inevitability.
This is not a good comparison. World has been growing the population and improving quality of life. This created thousands of new job categories. Current situation must be assessed on how many new jobs can be created. Will they last 15-25 years?
I like to imagine a new form of wealth distribution needed to ensure happy life for everyone- healthcare can become cheaper with AI for example. Could we fund healthcare for all?
The U.K. has healthcare for all and it costs about the same per citizen that the US spends on Medicare just to cover a small number of people.
The plow only affected one industry. AI will affect every industry.
I get your point that it was more localized than what AI offers, but the invention of the plow changed a lot more than one industry.
imagine the increased demand in animal husbandry, tool and die making, metalworking, woodworking, logistics and transportation, storage & food processing itself.
The secondary effects of any big jump like that rarely touch one portion of life.
This comment needs to be made more frequently. Nobody acknowledges the consumerist risks in AI job destruction. Henry Ford famously recognised he needed his workers to afford the cars he made.
I feel like that’s such a echo chamber perspective though. You need consumers with some income to consume products made by some other consumers for an income so they can consume. Like I’m not even saying you’re wrong, it’s absolutely true that this system is built on those assumptions and it will likely collapse if those assumptions are breaking, and a sudden collapse is not desirable, but I don’t think this system should remain the way it is either.
It’s off topic, and it also makes no sense. Why wouldn’t there be jobs? All the past times new automation arrived, there were still jobs. The jobs simply change. Why? Because we don’t stop wanting to buy things as automation makes things cheaper. We just buy more
In the past it actually took a generation or two until new jobs appeared and many people’s life were destroyed by automation.
Yes, it will be painful, but there will be jobs. I predict the younger generation will likely be better suited to adopt to this new world, because it will be easiest for them to start from scratch at a new paradigm, and less for them to lose by doing so
By painful, do you mean another Great Depression? Because a lot of societies just straight up did not survive that. Some nations are still trying to find their feet after that.
Saying its painful but things will be fine, comes across very... Farquaad.
I doubt it.
Younger generation had an edge previously because they could absorb how to use new tools, machines etc compared to someone older.
That's not the case here anymore.
Older people don't have any problem using AI. It's just AI don't need that many people. I don't think you can blindly apply what happened in the past to this case.
> It's just AI don't need that many people.
For some reason, people in this thread keep making this statement without providing any reason why they believe it
Just look at the hiring stats for new grads. And compare it with pre ai era.
That’s actually been my point the whole time. The jobs change. New grads aren’t graduating with skills needed for the new world
If you don’t think using AI is a skill, then you haven’t used it enough
> If you don’t think using AI is a skill, then you haven’t used it enough
If you think it is a skill, then you haven't used it enough.
FWIW, I use it plenty, and you're talking to a group of highly technical people who have probably also used it plenty.
> If you don’t think using AI is a skill, then you haven’t used it enough
Everything requires some amount of skill, but if you think using AI requires some great skill, like a degree, then you're using it wrong.
More to the point different people will have different levels of productivity using AI, but that has more to do with their existing or different skills. For instance more experienced developers tend to be more productive with AI (but not always).
https://ec.europa.eu/eurostat/statistics-explained/index.php...
So higher today than in 2015?
https://www.newyorkfed.org/research/college-labor-market?utm...
Doesn’t select to back your claims up in America
They're software engineers or adjacent.
Technology has been putting people out of work for centuries, and the economy and job market adjusted over time.
AI is no different, it's just people are swallowing the hype and getting hysterical. Certain things will be made more economical via AI which will create new opportunities which will in turn create other opportunities and new work.
The idea that AI will put everyone out of work is asinine.
Clearly opinion of somebody unconcerned about existential crysis, maybe you milked those faang bonuses and are set for life or at least think so. When society crumbles around you full of desperate folks it won't matter much though, there is no fence high enough you can build around yourself.
Most people, especially with kids, don't share this attitude to keep things polite.
This isn't fully correct, and the second part is focusing on cobsumption rather than the reason of employment: production.
In a fully mechanized/automated world, we won't work. It will make no sense to work. Im this scenario we have a wealth distribution problem. How do you decide who gets how much of what? Capitalism as we know it relies on cost of labour to distribute wealth.
Now, will AI be doing this? I don't think so. So I agree with you, it's going to increase productivity of a lot of jobs, but it will also create jobs. But we don't really know.
> In a fully mechanized/automated world, we won't work. It will make no sense to work.
Your entire argument rests of this statement. Why wouldn't it make sense to work? How would one company differentiate its products from another if they're all using the same AI?
Let's take a contrived example. Let's say automation can produce yachts for all of us at affordable prices someday. We're just going to all own yachts then. What will be the reason for one person to choose one yacht over another? Branding, marketing, positioning, patents, regulations, etc. Who does that work? Humans. Because ultimately you're selling to humans in a human-controlled world, not machines.
Why do we assume humans will do the work? What's the inherent reason for this?
What I'm saying isn't anything new. It was a hot topic during abd after imdustrial revolution. Even Karl Marx joined the discussion and wrote about it. The key thing is, what is money and what determines the prices. If there's abundance, the problems you talked about start to occur and market cannot price the goods. This is, to some, abundance communism.
>Why do we assume humans will do the work?
I suppose, at that point, the key inputs to a company become creativity and ambition (rather than, say, overall effort). Humans are still better at those than AI.
Humans would still direct branding/marketing/positioning while we control the overall creativity and ambition of a project/company.
If the only intent is to make money, then I suppose you could build machines that tweak the creativity & ambition in different ways to create different products & services, in which case you can argue no humans need to be in the loop.
> Branding, marketing, positioning, patents, regulations, etc. Who does that work?
Why are humans needed for that?
> Capitalism as we know it relies on cost of labour to distribute wealth.
But there is no pure capitalism and the government also redistributes wealth.
In an extreme(-ly unlikely) case of everything being automated the government would just redistribute the generated wealth to the populace (assuming a democracy). Apparently the end state of capitalism is socialism.
This is usually where people insist that the corporate overlords will take over and enslave everyone.
> All the past times new automation arrived, there were still jobs.
Not for a generation or two, there weren't. Unless you have an example, I'm not buying this argument.
> Nobody acknowledges
Yes they do. Constantly.
It really doesn't, not everything needs to be made about AI.
If full automation does come, you will buy the car for 1000$. Also, we are a long way from full automation, basically we need the next generation of AI, or even further than that. We will be all dead by then.
> We will be all dead by then.
Of old age or something else?
By AI. Probably. At least 10%. Sorry, couldn't resist..
BlackRock is thinking of solutions to this...
Human wants are infinite and not all of them can be handled by machines, so I'm not that worried about jobs. For one thing, we can come back to the older mode of education, where, instead of teaching children in schools en masse as we do now, each child had a private tutor. This would increase the need for teachers (tutors) by a factor of 30x, an create tens of millions of jobs in the US alone.
We can, but what points towards anyone wanting to do that? We can already do that if we want, but we don't. We focus on cost cutting and optimizing everything. If only some technology could provide a personalized tutoring experience to our kids.
Today it’s too expensive.
And human labour cost changes because of complete automation? Maybe.
My point was basically that I only see us going the exact opposite direction of using more human labour. I don't see how that changes with more automation, I'm probably too pessimistic.
The economy will just increasingly supply the people who do have incomes, which are the owners of capital.
Detroit tried something like this as well, mostly under the USCAR/USAMP umbrella when Japanese competition knocked them off their stools, here's some reading if you're interested:
- https://uscar.org/about/
- https://www.automotive-fleet.com/news/gm-ford-officially-sig...
it'd be interesting to see if they try something like NUMMI between Japan/China beyond the fairly simple bz3 operation they had going
- https://en.wikipedia.org/wiki/NUMMI
It's interesting how optimization will eventually make everything exactly the same. And it is just starting.
Batteries, spark plugs, fuses, and indicator lamps have been standardized for a century.
Standardized? For a century?
I can't count on both hands the number of different types of battery, spark plug, fuse, or indicator lamp I've encountered.
And I've never worked on a car that was produced prior to 1979.
"Standardized" in the same sense that screw threads are standardized. That doesn't mean collapsing all the way down to a one-size-fits-all part.
I can think of at least 3 types of car battery terminal in-use today: The old top-post, GM's side-post, and Toyota's (close-but-not-the-same!) top-post. And that's just the terminals -- nevermind the different sizes and mounting configurations.
I can screw in any of a whole galaxy of spark plugs into my Honda's engine, but that doesn't mean that the pistons won't collide with them before reaching TDC. (Does it matter if the screw threads are compatible when the parts crash before they can be used?)
Do we really have to talk about the light bulbs and the fuses, too? It's pretty boring, but I'll be bored later if anyone really wants to get into that.
(I'd like some popcorn, first, if anyone feels like contributing something.)
Somehow, LEDs made lightbulbs even worse. I have 7 different types of lightbulbs I need in my house. 7! Two of them aren't even screws. Wait, no, there's 8, I forgot the LED strips as well with the JSTs. Actually, nine if you include USB. Wait, ten, because there's USB-A and USB-C.
Sure, but to be fair, for cars manufactured across the same decade or two, at least going back to maybe the 50s or so (when 12V became "standard") and up to around 2010-ish - there was a small enough range of those things that I would have a reasonably good chance of getting on at the nearest gas station (well, "service station" since I'm in .au).
There were "step changes", like when headlights went from sealed beams to halogen bulbs in reflectors, You either had 6" or 8" sealed beams, or most likely H4 halogen bulbs (or a single filament bulb I've forgotten if you had separate low/high beam lights). If you had a headlight out, it mostly didn't matter what model car you had, or of it was a Ford or a VW or a Leyland, they all used one of 4 types of bulbs and they were all interchangeable.
In my head, and this is more motorcycle specific than car specific, but likely indicative across the entire automotive industry, it was the early 2000s when that started to change. My 1991 and 1998 Hondas and my 1999 Ducati and my 2004 Cagiva all used H4 headlight globes and the same 10/25W tail/brake light globes. My 2009 Yamaha was the first bike I owned where I had to buy headlight globes from Yamaha.
Once upon a time, headlight bulbs used to be more-standard than they are. Or at least: They were from my US perspective.
I've had cars with 9006/9007 headlight bulbs. Those were OK, I guess, other than the polycarbonate housings that turn into a clouded quagmire of shit when exposed to sunlight.
My 2012 Honda uses D2S headlight bulbs. That's a metal-halide part and it does not interchange with any other format, including other metal-halide parts. Each also requires both ballast and igniter assemblies. (Once lit, the bulb itself runs on [IIRC] 35V. But it takes a few kiloVolts to get it to initially arc over, vaporize some metallic salts, and start making light. And none of those volts are the ~12V that the car's electrical system produces.)
But at least it can use ~any regular D2S bulb. More-modern cars often use LED assemblies that aren't interchangeable between models at all.
But, yes: For decades in sealed-beam automobile world, we had a couple of sizes for round, and a couple of sizes for rectangular, and these sizes included the whole light-producing assembly, with focusing elements and the whole shebang. Some included a high-beam filament and some kept that separate, but: Any of these were very normal (standardized) things that anyone could pick up at ~any place selling auto parts and swap out with a screwdriver and whatever it takes to remove some trim.
(I've lived long enough to have seen sealed-beam headlight assemblies on shelves at small-town grocery stores. I have every confidence that if I rolled into the parking lot of such a store with a burnt-out halogen headlight in nineteen-eighty-something, then I'd be able to buy one and borrow enough basic hand tools to replace it in their parking lot in fairly short order. I'd probably also have paid Way Too Much for the headlight assembly itself, but I'd have been very grateful anyway. Convenience has a cost, even in matters of safety.)
Correct. You can even go back to things like the Shaker furniture or the history of the suit, or money itself. My point is that it is interesting how maximizing profit will always lead to thinsg merging and so eventually you'll reach a point of only one per category.
Think about it like this, 15~20 years ago, each company was building an operating system: Simbian, Windows Phone, Windows Mobile, various Linux based phones, Android, iOS, Blackberry OS, Palm OS, Firefox OS, Ubuntu's Unity Mobile... But then with the rise of iOS/Android, the cost of building something for each platform sky rocketed, you could have ten people each making the same tool for a different OS, or each making a different tool for the same OS. On the other hand it was easier to write one software for Android, and install Android everywhere, instead of having ten different apps for ten different OSes, and a company could install Android on their phones and have a smart phone, the other could make a whole operating system and only when all of the Anroid apps were available to their os it would have become feasible.
So efficiency and optimization always means the death of variety. You can have many programming languages with no good libraries, or a crappy JavaScript and C that have everything available to them... We all chose the latter.
But this was because software was expensive. Actually now this could be the only field where the trend could be reversed. You could make any niche platform, and porting apps over would be a few dollars and some minutes.
And are all Android phones the same? You can have one with liquid cooling of battery and turbo fan cooler for CPU! Same will be with the car. You can make so many different designs with standard parts!
Kind of. Some are bad, some are even worse. We were told and thought that future will bring us mass customization. That was 30-40 years ago. And all we got are these cars, phones, computers, microwaves... looking the same, doing the same, costing the same, and all are equally useless and shitty. Such a future.
Standardization also has an intrinsic value. Think of traffic signs.
Headlights have gone the other direction in my lifetime, to the point where I see more hazed and cracked lenses than I see good ones - bespoke replacements are too expensive to bother with.
Was chatting with the local hardware store owner a few weeks back about bulbs and solenoids - there are standards, but the breadth of different types in cars on the road means it isn't worth the shelf space to stock them - individual types move slowly while stocking enough variety to cover what the local market needs takes space away from more profitable things (like metric-thread fasteners).
Even nearby auto parts store end up ordering common parts from regional warehouses, putting them on roughly equal footing with RockAuto in terms of time to delivery (and of course at a disadvantage on price).
And this doesn't even get into truly unique parts like door latch motors or the various ICs that control various subsystems.
Frankly, it's a mess. Having a spare "parts car" sitting around is best if you have the space for it.
This is especially apparent in aviation. Every airliner designed and built in the last 30 years looks almost identical.
Largely for the same reason as cars: aerodynamics plus safety regulations.
For cars it feels more like fashion than any technical requirements.
I believe exactly the opposite. Assembly line manufacturing already made everything exactly the same, and it is soon ending. Well, not ending, but becoming less important. As general-purpose robotics ramps up and labor+NRE becomes cheaper we will be able to have more custom stuff made just for us, instead of accepting whatever some contract manufacturer in China decided to make in a factory for five different brands to white-label.
having a product with a quantity of 1 made for you is always going to be more expensive than making a million of a thing, this is economics independent of any technology
I'm not sure what general purpose robotics even is because the point of robotics is to not be general purpose, a general purpose robot is hardly faster than a general purpose human, the speed of the assembly line comes from recombining standardized parts, that's true for human or robotic artisanal vs assembly production
the bespoke sandwich shop is always going to be more expensive than the sandwich factory even if the former is operated by a bot
You're describing how robotics has been. But we are on the precipice of huge changes in robotics driven by AI.
Yes, assembly line stuff will always be cheaper, and we'll continue to use a lot of mass manufactured stuff. But we don't always pick the cheapest option for everything. As custom options become cheaper we'll pick them more often even if they don't reach parity with mass manufactured options.
Sometimes a quantity of 1, custom-made thing is exactly what people are attributing value to and willing to pay unreasonably more.
It’s not independent of technology though. You can get far more customisation now than you did in the past largely thanks to technology.
This was Dell’s big selling point when they started. Your PC built to order.
That's what 3D printing was going to (or will) be, still a long way to do.
Is that a problem? It's a car, an ICE car's internals have been pretty much the same for decades. Except obviously the integration of electronics like the ECU.
Standardization of parts is good for the consumers, cheaper to build and cheaper to maintain.
The combined effect of focusing on assembly, outsourcing subsystems while needing to differentiate themselves leads to suppliers having more power. This worked while to volumes were high and predictable. Standardization is helping here now, especially while the future volume of any new product is still uncertain.
Standardised parts will be cheaper for manufacturers, but will it actually make cars cheaper for the buyers?.. That is the question.
Probably both. If it doesn't make the cars cheaper, people won't buy them but if they can hold some of that savings for themselves, they will. This alone won't save enough to compete with the Chinese so maybe they won't get any of it.
I’m shocked this has not happened sooner, and I suspect US automakers will have to do the same if they hope to survive.
It's happened to some degree for a long time. See K-cars. Automobile manufacturers having platforms with a fair bit of standardization across models isn't new.
This already happens. For example, Ford and Chevy collaborated on the 10L80/10R80 transmissions that they use on their trucks.
And it has been a complete disaster. Half of them are junk from mile one and the rest are ticking time bombs.
Cars might end up pretty boring, all the same features and parts. Kind of like what happened with smartphones.
On the bright side, maintenance and repairs should become much simpler.
I mean, no matter how many parts you share, you can still design a different dashboard shape, a different front fender, etc.
If 90% of the infotainment system is identical between 15 brands and the only differences are the bezel around it, the exact shape of the knob, and the coat of paint on the UI is that really so bad?
Costs just keep going up and up. People complain about it constantly. Anything to help make cars cheaper so they’re more competitive is a plus for everyone. Even if it’s only by a tiny bit.
Surely there's tons of parts on a car that could be picked from a small menu instead of such wide variety.
We certainly did fine back when all cars had sealed beam headlights and the choices were circle or the more exciting rectangle and two lamps with two filaments each or four lamps with one filament.
I could easily see standardization to a small menu of less exciting parts. Surely, every model still needs different wheels, but wheel hubs could be pretty standardized with several sizes.
I always wonder how much time and effort goes into designing and producing varieties of the same thing. Think of coffee machines. As the technology of making coffee didn't change much over the decades, all this effort goes into design and manufacture.
Narrator: It ended up being boring AND expensive.
A non-OEM part for my Toyota is $50 on Amazon. I had to buy it local (because the car was already in the shop and we couldn't wait for Amazon to deliver it) from NAPA, it was $500.
Seems like there's plenty of headroom here.
The JAMA proposal for standardizing components in this instance is actually about materials. The proposal is for all three automakers to standardize their quality requirements for steel, resin and cables/wires.
This is not about OEM markups.
Should have been done for decades, most car parts are basically solved, there is nothing less efficient than dozen of companies literally reinventing one by one, wasting millions to basically reach the same conclusions.
I was going to make a remark about Unipart, the spare parts company from British Leyland.
Remarkably they seem to be a British industrial success, and I’m impressed.
It's about economies of scale. If you're going to make expensive tools for parts, the more parts you can make from that tool, the better for your bottom line. That's the huge advantage Chinese companies have.
Not sure about other countries but in Pakistan, they are scammers, their local assembly plans produce 3rd rate cars, demand tons of money in return. The Chinese names like BYD and MG are taking the market share. I am glad
Return of the keiretsu
Does this include Lexus, Infiniti, and Acura?
My gym commute time is half an hour by subway and 20 minutes with car. Today I thought to use car to shave that 10 minutes off. Bad mistake.
First, a driver was about to turn as I was catching the end of a greenlight... Let's just say I'm grateful to be in one piece.
Then, the navigation got me stuck in traffic for a train crossing. The train must have been 200 cars. I lost count. As I'm sitting there missing reading my ebook on the subway, I look around at the cars. A blue Kia hatchback with the new logo, a Mitsubishi, a few Toyotas, Hyundais.
I can't help but think these brands are already relics.
A trend under everyone's nose is public transportation, and non-car travel modes, have only gotten better. For the rest, you'll have public and private vehicles that drive you, there's car share, and what remains is a much smaller rural market.
What does each of these companies have, to respond to that? Shortages and cost overruns it seems, and not much else. Nokia was a household brand until it wasn't.
It's hard to imagine Toyota having that faith. The rest, I reckon many will fall. Don't you think?
> Don't you think?
No, I think your comment comes off as a bit out of touch if you believe that public transport is replacing the tens of millions of cars that hit the roads on a daily basis any time soon.
That would really depend on the country you live in plus the culture.
We have pretty decent public transportation in Qatar but people mostly go by car and we use a shit ton of fuel while at it. Around 3 cars average per household here and closer to 5 if you only include citizens. It's all car culture with plenty of infrastructure to support loads of cars.
A day pass on the metro costs just $2 but our fuel is also quite cheap.
Where you live, perhaps. In my city public transportation is a mobile shelter for psycho crack heads.
Not about to be taking it anytime soon.
Car sharing, robotaxis and whatnot will never outcompete owning a car. One gets you places, the other is a private mobile warehouse you own. It’s the same as being at your landlord’s mercy versus owning your own house. I can throw my junk into the car and have it there for a week if I want to, I have zero worries whether I damage interior when moving materials for removation, no worries if some scratches I didn’t cause would be blamed on me. I don’t want the car rental experience every single ride.
Non car travel modes are fine unless they’re not. I can ride a bike when it’s nice outside, but when it’s cold or raining I’d really rather get into a car. Public transportation can be better if the whole city is in a gridlock, but usually it’s not, and you’re locked into preset routes. When I’m going somewhere with friends I’d rather be able to talk to them freely without third patries giving me a side eye because it’s too early or too late or omg there are little children here you need to keep this pegi 8.
Let people own things, damn it. There’s enough rent seeking everywhere.
Just wait until we hear how immoral it is to own a personal vehicle.
No disagreement with the rest of your comment, but rent seeking is not synonymous with offering a rental service. The latter is only rent seeking if the rental service depends upon some sort of government granted monopoly or regulation to prevent competition.
> It’s the same as being at your landlord’s mercy versus owning your own house.
This, 100%. Besides, car rentals are so expensive that if you need a car more than a couple of days a month, you are much better off keeping a cheap car. Uber and the like have also become insanely expensive.
public transit's utility varies widely, not just between different cities, but also between neighborhoods within those cities.
I've lived in places where my cars stayed parked for weeks at a time... and in places where I drove essentially every single day.
E-bikes/related go a long way to shrinking a city, but the thing cars have going for them is that if it comes down to it, you could live out of your car. Hard to do that vs anything else.
If I told you a dramatic story about the subway being late one day, would that change your mind? Or have you already made up your mind?
In the US at least, the only public transport in most cities is bus. In my relatively small city, I can drive anywhere in town in 10-15 minutes. Bus is significantly slower, and doesn’t even reach my business, so I’d have to walk 45 minutes on top of the bus time. I’d be looking at 1.5 hours each way, vs 10 minutes by car. Public transport is just an incredibly inconvenient option in many cities. Cars aren’t going anywhere.
Production methodologies and themes will be the differentiator?
Hoshin Kanri vs TPS
This is quite sad to see - as parts standardize so do customizations. The Iran war has taken its toll.
In the UK Honda has just one EV with a range of 110 miles, after they discontinued their previous effort that had huge interest and hype (Honda E) yet they only gave it a similar range of approx 105 miles IIRC and so obviously no one bought them and it was quietly cancelled. I know let's repeat the same mistake!!!
At least Toyota have a range of more sensible EVs now in the UK, but they seem to be squarely aiming at the large (i.e. expensive ... Tesla Y, BMW x1 prices for example) SUV market where you're never going to compete to more premium brands in a Toyota (this is why they invented Lexus after all). Where is the 250 mile range EV Corolla or Prius for example?
Curious how it plays out for nissan given they're already just reading Renaults.
I used to only buy Hondas and Toyotas in the old days but now I've switched to other brands because they sell EVs that are usable.
Honda e was such a cute car but it was so inefficient, slow to charge and had bad software that even most of the cheap EVs China is dropshipping to EU are much better. It was really a 2012-type EV that was somehow introduced in 2020. Which could serve as an indicator how far behind Honda was on EVs at the time.
Think of this the next time someone tells you competition is good for consumers… sounds they could have brought down prices at any time, if they’d cooperated, hey?
But this whole initiative is only happening because of competition, primarily from Chinese automakers!
But they could always have done it. That they only do it now means competition wasn’t enough to get them to try to make prices lower. Or that there was no real competition, prior to the chinese entering the market
I don't understand, are you asserting that less competitive pressure in markets benefits consumers?
No, i’m arguing we could have legislated standardization of parts, and forced companies to bring down prices in response.
Perhaps the next cost saving measure should be to remove the cellular modem that nobody asked for and that shamelessly spies on drivers. Unless, of course, Toyota et al. do in fact get a kickback from dealers, insurance companies, and data brokers for invading their customers' privacy. In some of the cars these companies make, you need to either pull a fuse (best case) or take the dash apart to unplug the unwanted "bug."
Strong concur.
I think Chinese car manufacturers are doing this as well, so while I personally would never choose a car with that stuff in it unless I was certain I could disable it, I don’t agree that this would help their bottom line. Not until there’s a significant market for cars that don’t have spy tech.
Never going to happen. Europe already requires emergency calling from your car so the hardware already needs to be there. https://europa.eu/youreurope/citizens/travel/security-and-em...
I could see this eventually making things easier for repair shops, instead of managing different parts for all the brands it's less complexity.
The part about keeping consistent color coding in the wires relives a mental load for repair.
I've always wondered why there are still 5-6 different window cleaner (i.e. Windex and equivalent). I would have thought we have figured the best product to clean window by now.
I guess it applies to car as well.
isn't that literally the case for any kind of cleaners? why have so many varieties of soaps, shampoos, etc. at that point?
Because without marketing everything would be treated like a commodity? Just a guess.
There is a part of me that wishes there was a supermarket with all-white boxes just labelled "flour", "shampoo" etc and that all cars looked the same.
More seriously, I suppose it's because you want competitive markets and products can vary along multiple dimensions like price, size, ingredients / composition, ethical claims, consumer targeting, etc.
I'm reminded of one of my favourite historical Onion articles: https://theonion.com/consumer-product-diversity-now-exceeds-...
“As more and more species fall victim to extinction, we face a grave crisis of decreased diversity, not only in America but across the globe,” Hargrove said. “But the good news is, these losses in biodiversity are more than offset by a corresponding rise in consumer-product diversity. Though flora and fauna are dwindling, the spectrum of goods available to consumers is wider than at any time in planetary history. And that’s something we can all be happy about.”
It's a thing in canada, sorta: https://www.pcexpress.ca/noname
At that point isn't that going in the direction of "all humans should be the same"? no various scented soaps or certain types of flour better for certain types of baked goods that people prefer or even need (like gluten free)?
For a long time, that was kind of how Aldi (in the US) operated:
Need canned beans? Fine, no worries: Baked beans, black beans, pintos, red beans, refried, whatever -- they're all on the shelf... and they're all labeled with one of Aldi's in-house brands.
It was generally the same with the meat and the cheese and the produce and ~everything else, too. Ribs? Ribeyes? Fresh salmon? They probably had it, and there was definitely only one brand to pick from -- whichever one of Aldi's house brands fit that broader category.
(It's softened somewhat in recent years. Nowadays, I can select a block of [fucking-outstanding for-the-price] aged cheddar cheese with an Aldi house label, or a competitive product at a somewhat higher price with a Cabot label. They're stocked next to eachother.)
That's pretty much how Trader Joe's is in the US; in fact, IIRC TJ's is owned by one of the Aldi companies.
Yep TJs is Aldi Nord.
I just want product packages to be standard sizes and shapes, so that other things can be made to fit them perfectly.
eg. Breakfast cereal boxes should be small, medium, and large, regardless of brand (and "large" and "medium" should differ only in width). Then shelves and cabinets can be sized to fit the ISO standard cereal box with no wasted space. Same with dish soap. Etc.
See preferred sizes.
https://en.wikipedia.org/wiki/Preferred_metric_sizes
You could always order your own chemicals and make your own. We have diluted our own hydrogen peroxide ever since cleaning products were unavailable during COVID. Lab supply stores will ship you 32oz containers of food grade ~30%. That plus the remainder of water on a 2 gallon container is basically cleaning-grade and lasts quite a while.
Higher percentage peroxide breaks down faster than low percentage stuff. You'll want to be careful with 30% (that is quite strong), and store it in appropriate conditions (if I'm not mistaken, a fridge)
General principle you bring up I agree with, but the example is interesting for this issue/reason
3% feels more than enough for anything, and is cheap.
I’m curious your lifestyle and usecase!
yeah I think my example was poor. like dishwasher soap, why do we still have 4-5 brands competing for basically what is essentially the same product.
Are there different types of glass cleaner? Windex and off-brand windex is all i notice at the store
At a minimum there's ammonia based and ammonia-free. The latter can be important for certain window tints.
hehe yeah not the best example, let's replace glass cleaner with shampoo, toothpaste, soap, any kind of commodity product!
all these brands spend so much money in advertising just to convince people that their product (which is probably 95% the same as any other one) is the best.
what a waste of resource and money.
Not to get all socialism on hn, but these kinds of products would be perfect for making publicly owned corps around. The kind of companies that won’t move production offshore so the shareholders can get a bigger payout.
Manufactures like SC Johnson (Windex maker) pay major retailers for shelf space. The more variety, the less shelf space a competitor has.
That’s why there’s 100 different toothpastes that all effectively are the same.
FYI stannous fluoride is not usually the default floride salt (versus historic sodium fluoride), and you still have to consciously make an effort to seek it out.
Hydroxyapatite is what you want in your toothpaste. It remineralizes your teeth so they get stronger. Also, autobrush.
HAP/c-HAP toothpaste is not readily available in retail where I live, and I don’t think I want to pay shipping for toothpaste.
I’ve also had good feedback from my dentist re: manual brushing and “essential” toothpaste (of which I have a national stockpile) so I will use that up before venturing into something exotic.
Just use sensodyne repair and protect. Im not paid by GSK it's just what I use :)
Or avoid fluoride entirely. Straight baking soda works fine and is less likely to have lead in it.
But baking soda doesn't have fluoride to remineralize teeth?
Do you have something against floppy teeth?
Asked a window cleaner what they actually use many years ago. The answer? Washing up liquid. Ye olde Yes/Fairy/Dawn/Salvo. So, we don't seem to have figured out the best product to use yet.
Most car guys I used to run with used vinegar and newspaper. Works great, but unfortunately newspaper isn't easy to find anymore...
This is (was?) great for the inside of the windscreen - on cars with plastic dashboards the plasticizers evaporate out in the heat of the sun and condense on the glass. Vinegar and newspaper would clean that off really well, where window cleaner would mostly just smear it around. I was an especially useful thing to know if you were the sort of person who shined up the dashboard with Armourall every time you washed your car.
I agree this is what works best! but It's a bit messy inside.
I'm fascinated you think the market will produce a best product and then stop. Most of what the market does is figure out how to sell people a shittier product at a higher price.
They made a bet on hydrogen, which was stupid, and they made a specific type of bet on hybrid, which was somewhat successful, but they never went all-in on that.
They are also quite behind on car software, like the Germans.
An electric car without user facing software would be a breath of fresh air for me
I bought a new car in 2017 with no electronics in it. This year a hose broke which lead to no power steering. I was still able to drive the car myself to the mechanic, who replaced the hose for 60€, including his time. I don't know if this kind of car still exist, but given the opportunity I'd make the same choice without hesitation.
Cool. Can we have standardized, easily replaced "infotainment" systems back now?
Unfortunately that's impossible, but new advancements mean you can have your AC only controllable by a touchscreen now
The infotainment system gets at least an on/off signal from the car. That signal is a number that differs from brand to brand and even from model to model. So standardizing the infotainment also means standardization of the communication signals (at least some of them). Not impossible, but there are no incentives.
Basically Kia/Hyundai then
No, Kia is Hyundai.
Toyota, Nissan and Honda are different companies.
Today I learned that the Hyundai Motor Group owns both
- Hyundai Motor Company
- Kia Motors
https://en.wikipedia.org/wiki/Hyundai_Motor_Group
I am guess you're not even remotely a car person since this has been common knowledge.
Would these lower costs translate to repairs as well?
I hope so
Should have done it decades ago. About damn time.
Would there have been more arguments then about the best design for a given part?
Probably. Not sure why this would be a concern, but yes, it would take more thought before resources are committed.
I think they are talking about engine and metal parts. Because a lot of other parts of a car is already standardized and manufactured by other companies.
What about Mazda??
Mazda and Subaru already uses a lot of parts from Toyota, so they might be looped in my default. They are not considered one of the major Japanese automakers in terms of size.
> The push to simplify and lower costs comes as Japan’s seven automakers, including Toyota, Nissan, Honda, Mazda, Subaru, Mitsubishi, and Suzuki, work to fend off the increasingly competitive list of Chinese automakers
From the article (yes)
So the question then is, why didn't they do this years ago? The answer is, they didn't need to, because they knew that you would spend a lot of money on a car. A captive market keeps prices high.
Notable also in that historically Japanese automakers were renown for all of the advantages they due to intentionally avoiding this kind of thing.
here comes the age of Japanese slop. make parts cheaper and work worse to keep margin. worked with all of these manufacturers in Japan and the way they treat the suppliers the truck drivers tells you all you have to know about these brands and Japanese automobiles in a nutshell.
So... another Nippon Denso but fewer bespoke parts.
Smart, hopefully a trend between even more auto makers
If Chinese EVs weren’t being suffocated by import bans and ridiculous tariffs in Europe and the U.S. these companies would absolutely be decimated. I watched a review today of a China made EV by Mrwhosetheboss and it’s absolutely insane how far ahead those cars are compared to the overpriced garbage coming out from the rest of the world.
They wouldn't be ahead if not for subsidies.
The Europe EV tariff is so hilarious to me. They can't stop talking about the environment, make it hard for people to install ACs, and other sanctimonious bs. But when China offers a real solution, the do this, to protect their car industries.
Upon closer inspection there are things Chinese cars still can't do, most notably energy efficiency - it's not much of a concern in China, where there's infrastructure to compensate for that, but in other parts of the world it does make a difference.
If you look at the "one 15min stop" range, the first Chinese car to appear is the Geely-owned Volvo and only on the second page:
https://ev-database.org/#group=vehicle-group&rs-pr=10000_100...
I dont think they are that far ahead if you compare it to european evs? They are just much much cheaper. But why should we as europeans let them completely wipe out the industry? Its employing millions of people here and if we manage it properly we can catch up eventually.