Night_Thastus 12 days ago

"In the world of audiophiles — where provenance is everything and the quest is to get as close to the sound of an album’s original recording as possible — digital is considered almost unholy."

Out of context of the rest of the article, this is total nonsense. While some in the audiophile scene like going analog, none of them debate against the truth that objectively, vinyl is far lower quality. Vinyl doesn't have nearly the resolution or nearly the dynamic range that a high-quality digital recording will have. Not to mention the higher noise floor. You lose a lot of the original audio with vinyl.

I dislike peddling it as somehow the objectively superior option. Or more "natural" or close to the original. That's nonsense.

Don't get me wrong, DACs aren't perfect. But with good recordings and mastering, a good DAC and overall system, it'll sound great.

If someone still likes vinyl knowing its faults, that's 100% fine. Nothing wrong with that, everyone in audio likes the sound a bit differently. Some people absolutely love the sound of vinyl and having a cool physical collection with gorgeous cover art. Power to them!

  • naikrovek 12 days ago

    if your DAC is a DAC, truly (that is not a high bar) then the audio that comes out of it is a perfect reproduction of the audio that went into the ADC that produced the digital audio, provided it is a true ADC (also not a high bar at all).

    Nyquist theory proves it.

    The Ogg people have a fantastic video explaining this. Technology Connections on YouTube has a video about it as well (the Ogg video explains things better, imo.)

    • timpattinson 12 days ago

      The Shannon-Nyquist sampling theorem only defines the sample rate to perfectly reproduce a signal of a certain bandwidth.

      It says nothing about noise, distortion, dynamic range. In these areas it is impossible to create a "perfect" DAC, although granted the best DACs are indistinguishable from perfect as far as human perception is concerned.

      • e63f67dd-065b 11 days ago

        I'm unfamiliar with the mathematics involved, but this is what Wikipedia says the theorem states:

        > If a function x(t) contains no frequencies higher than B hertz, it is completely determined by giving its ordinates at a series of points spaced 1/(2B) seconds apart

        I took this to mean that it's any continuous function x(t), including amplitude information. I took a quick read through the proof and that's correct as far as I can tell.

        Does that not mean that "noise, distortion, and dynamic range", as they are all encoded in the continuous function that is air pressure over time, can be perfectly captured and reproduced? All you need to do is throw out all information outside of human hearing range to have no frequencies higher than B hertz, and that's all you need for perfect reproduction.

        If there exists a transformation f(x(t)), then said transformation can also be captured by the same sample, can it not?

        • flaghacker 11 days ago

          Yes, a perfect recording of the amplitude of a function at a frequency of at least 2B contains enough information to perfectly reconstruct that function. Reaching this frequency is not that hard, but getting a perfect amplitude measurement is. This is where "noise, distortion and dynamic range" come in, they act as disturbances to the amplitude.

        • dusted 11 days ago

          Yes, now we just need mathematically pure materials... Like..

          Wires without resistance, capacitance and inductance. Resistors without capacitance and inductance. Capacitors without resistance and inductance. Inductors without capacitance or resistance.

          While we're at it, semiconductors with perfect linearity and so on and so on..

          I'm not going to argue that audiophiles generally achieve much of these, or even that it's especially important for the perceived audio quality.. But, perfectly recording and reproducing anything is still not possible, not in audio, not in video.

          • CamperBob2 11 days ago

            But, perfectly recording and reproducing anything is still not possible, not in audio, not in video.

            Which is an argument in favor of getting the signal into the digital domain as early as possible and maintaining it there for as long as possible.

            The audiophile's stereotypical myth of analog supremacy is the assumption that the opposite is somehow true. Weird, but everybody needs a hobby.

            • dusted 10 days ago

              I agree. I was not arguing against digital storage. Only against the sentiment that "just do digital and all problems are solved".. well, the storage, transport and editing is solved.. The analog problems are not solved, nor solvable, only optimizeable to a degree where further optimization becomes irrelevant, microphones/ADCs/DACs/Amplifiers/Speakers still have analog components that are inherently imperfect.

              • Sporktacular 9 days ago

                And that doesn't even consider the effects of jitter of the word clock that cannot exist if everything stays in the analog domain.

                There are costs associated with digital that, like with analog, must be managed.

    • atoav 12 days ago

      As both a sound and an electrical engineer the issue here is the if. Many DACs claim 24 Bits, while their power rails are so noise that they will meaningfully reproduce much less. The you'd also have jitter on the DAC clock etc.

      Just because it says 24 bits on the datasheet of the used DAC IC doesn't mean your circuit will output a voltage that represents your input with 24 bits of precision. Designing and layouting PCBs with high precision DACs on them is certainly something where a lot mistakes can be made.

      But you are right, if the PCB is done correctly, the signal exiting the DAC would indeed be an truthful representation of the digital data.

      That being said: nowaday reaching enough precision for even the most critical listener should be not that hard/expensive.

      • naikrovek 11 days ago

        DAC jitter is not the major problem people make it out to be. even the lowly, uncontrolled, $2, +-20ppm frequency stability crystal oscillator has less jitter than is audibly perceptible to a human, especially given that the jitter is dependent mostly on temperature variations.

        you are right about bit depth. a jellybean 24-bit ADC has around 8 bits of noise floor, maybe more. To improve that, you sample at an insane rate (making jitter even less of a significant factor in the final audio) and average your measurements, and you can get 2-3 more bits out of that.

        my overall point is that these problems you hear from people trying to sell you audio hardware are almost all not problems at all, as far as human ears and human perception are concerned.

    • ncmncm 11 days ago

      I used to believe this, based on the mathematical proof referred to. But every proof relies on assumptions, treated as axioms, ideally (but rarely) all noted.

      This particular proof assumes that the clock is perfect, with no jitter or delay between one place it is used and another. There are more ways for a clock and uses of it to vary than you probably imagine possible.

      It also assumes the A/D and D/A converters produce exactly correct results, which none do. We expect them to be close enough.

      So in fact the output is as close to the same as the input as anybody cared to ensure, subject to cost, component tolerances, and amount of attention spared.

      In practice, it is almost always as close to exact as anybody listening cares about (and better than a phono needle could manage). But there are ways for digital systems to produce bad results, by happenstance, laxness, or just normal aging.

      Few ever check the calibration of their equipment.

      • naikrovek 11 days ago

        it's almost always far more than good enough for human ears.

        audiophiles' continuous search for "perfection" is pointless because human ears are not perfect. not by a long shot. I don't care who you are.

        just like how your eyes lie to you, so do your ears.

        48kHz is not a difficult clock rate to maintain perfectly. at all.

        all you need is a DAC of regular every day commodity quality, and an equalizer if you think "warmth" is a quality of vibrating air.

        • ncmncm 11 days ago

          Lots of things are not especially difficult for someone paying attention to get right. But that doesn't mean they are always got right. Thermodynamically speaking, it is easier to have a digital system that fails to reproduce a sound waveform accurately than one that achieves it, because there is only one way to the right output, and uncountable ways for it to be wrong.

          So, even leaving aside gross incompetence (is that smart?), anything that could be sufficiently perturbed thermodynamically, e.g. by age or decay, could throw off your results.

          The great advantage of digital electronics is that they make most of the system relatively insensitive to commonly encountered thermodynamic effects, within limits. Most such effects that exceed limits make your thing just not work anymore. (We have all experienced this.) But some can have a more subtle result, some of those without even exceeding those limits.

          Fortunately, most of those involve only a few components. Those components are mostly only in your power supply, your amplifier, your DAC, and the clock circuit driving the digital stuff, including the DAC. Of those, the ones that make a difference to sound quality are mostly in the power supply and amplifier, which usually makes sound obviously bad, and the clock, which can make sound subtly bad.

          Fortunately, clocks involve very few components and those are not operated anywhere near physical limits, so they rarely go bad. Furthermore, most when they go a little bad don't affect the clock's output in any way that affects what it drives.

          Unfortunately, when they do, the effect on the sound you get may be hard to describe beyond "not right". Then, fortunately, you can swap out the whole subsystem with the clock in it to see if that is at fault.

          So the most usual danger from a dodgy clock or other source of subtle wrongness is that, as for the case of a needle dragged down a wiggling groove, you might get used to how that sounds, and want it all the time. And that can be hard to match in another system.

    • quickthrower2 12 days ago

      This is trivially correct if you assume:

      Perfect reproduction means error less than some threshold e.

      “True” means has enough sampling frequency and accuracy to ensure the error threshold is less than e.

      • SideburnsOfDoom 12 days ago

        There's always a threshold though.

        Proof by contradiction: if there's no threshold, then sound fidelity can in theory be infinitely precise. But nature does not work that way - at Planck length distance breaks down, at the width of a carbon atom the resolution of a vinyl surface ends, etc.

        • quickthrower2 12 days ago

          Audiophiles talking about quantum fluctuations in their analog recordings :-)

          • dr_kiszonka 11 days ago

            I used to have this exact problem with my cables! For this reason, I've spent the last six months building quantum shielding for audio cables, with genre-specific time crystal coatings. It is now available in my Qtsy store, if anybody is interested!

          • SideburnsOfDoom 11 days ago

            I'm not an audiophile, actually. There's no point, IMHO the most limited component of the system (with the highest actual threshold) would be my ears, and I know why: lots of exposure to loud music of various kinds over several decades.

    • yobbo 12 days ago

      Audiophiles sometimes claim they can hear artefacts of the "low" sample rate 44.1 kHz, and only 16 bit samples.

      Nowadays there exists audio files recorded in up to 96 kHz with 24 bit samples.

      • adrian_b 12 days ago

        The sample rate 44.1 kHz is objectively "low" in the sense that if you have to want a passband of 20 kHz, then extremely sharp low-pass filters must be inserted before the ADC.

        So sharp low-pass filters are extremely difficult to implement as analog filters with reproducible characteristics.

        Even when they are implemented as digital filters, as in most modern equipment, i.e. the audio ADC uses a much higher sampling frequency and its output signal is interpolated and decimated digitally to 44.1 kHz, it is still difficult to design the very sharp low-pass filter so that it will not introduce any audible artifacts on transient signals (the sampling theorem is based on ideal non-realizable filters).

        Raising the sampling frequency to be distant from the 40 kHz minimum value removes all difficulties with the design of the low-pass filters making it easy to guarantee that the digital signal reproduces exactly the analog input.

        When the audio CD format has been designed, the digital technology was much less advanced and storing a lot of bits was a far more difficult task than later.

        So they have made the trade-off of requiring very expensive analog low-pass filters in order to minimize the amount of bits stored on the disc and transmitted over the digital interfaces, because the digital processing and storage was even more expensive anyway.

        Nowadays, it is much more convenient to just use higher sampling frequencies for audio signals.

        • smat 11 days ago

          While the ideal filters have an infinite long inpulse response and are therefore „non realizable“, shorter filters simply increase the noise level. With filters of 100ms length you are already at SNRs that is far from what any human can handle (think of hearing rustling leaves while standing next to a jet engine).

          You will however need to accept delay from the lowpass filter, which is fine for music reproduction.

          So while these effects are measurable with very expensive equipment, they are in all metrics orders of magnitude better than any analog equipment.

      • relaxing 11 days ago

        > Nowadays there exists audio files recorded in up to 96 kHz with 24 bit samples.

        24/192 is becoming common, and you can even find 384 kHz files for sale (transcoded from DSD recordings.)

    • jstanley 12 days ago

      I don't agree with the characterisation in your first sentence (nothing is ever perfect in analogue), but the video was very interesting, thanks for sharing!

    • 112233 11 days ago

      > Nyquist theory proves it.

      Only if your signal is infinitely repeating in time, with no start or end. Otherwise, it's spectrum is not band limited.

      Is your ADC input such a signal?

      • dreamcompiler 11 days ago

        The input of every competent ADC process is always a well-designed multipole lowpass analog filter below the Nyquist frequency, so yes.

        EDIT: This also applies to sigma-delta sampling. Although there you can often get away with a simpler single-pole input filter.

        • 112233 11 days ago

          So you could claim to be able to reconstruct output of that filter. Which still is not the case — you cannot have signal to be both aperiodic and band-limited: either in time domain or in frequency domain signal will be periodic. So no real (that is, finite) signal satisfies requirements of Nyquist theorem.

          Not only that, your DAC needs to have infinite lookahead to reproduce the same input that was passed to ADC.

          • dreamcompiler 11 days ago

            Okay you're saying mathematical perfection is not achievable in the real world. Fine.

            It doesn't matter.

            What matters is that with a digital signal processing chain you essentially have a knob you can turn to approach mathematical perfection as closely as you wish, at least until you reach the point where the inherent limitations of your analog components begin to matter. And that point is far, far beyond where human hearing can tell the difference.

            But with analog signal processing you reach the limitations of analog componentry much quicker, while you are still well within the noticeable range of some humans to tell the difference. This is because the entire chain is analog and thus no part of the chain is immune to information loss or added noise. With a digital chain, only the ADC and DAC stages require high quality analog componentry. Everything in between is pure math.

            Neither process is capable of overall mathematical perfection, but digital can approach it much more closely than analog.

            • 112233 11 days ago

              Absolutely agree. Even more, once you are in digital, you can have actual mathematical perfection, that is reproducible and does not degrade with time.

              I just seem to take issue when Nyquist is getting inwoked. That is a purely mathematical result. It is sufficient (and I think required, too) to plug source into ADC+DAC, measure the output and show that the difference is insignificant. And much less than, say, with tape.

  • madaxe_again 12 days ago

    You may be speaking to better informed suckers than I am - as of the people I know who are “into audio”, they all get the magic ceramic quantum nanomagnets for their cables to go on, they all swear that 8-track was the pinnacle of sound quality, and that they can “hear” digital noise on CDs.

    Honestly, it’s 1% “I like music” and 99% snake oil salesmen taking advantage of fragile egos.

  • zw123456 12 days ago

    I agree completely. I have a large collection of original shellac 78's some as early as 1930's as well as true vinyl LP's from 1970's. They all sound terrible, what make them cool and collectable is the originality, not some magical thing about them being on shellac or vinyl. The new digital sound quality is far superior, hands down. Buying a reissue vinyl is a waste of money IMO.

  • mellosouls 11 days ago

    Reminds me of the famous John Peel quote:

    "Somebody was trying to tell me that CDs are better than vinyl because they don't have any surface noise. I said, 'Listen, mate, life has surface noise”

  • dmitriid 12 days ago

    > While some in the audiophile scene like going analog, none of them debate against the truth that objectively, vinyl is far lower quality.

    You conveniently forget history. Audiophiles embracing digital media is a relatively recent thing. It was vinyl and everything analog until about 10-15 years ago when it became <any combination of tech. nonsense>

    • adrian_b 12 days ago

      Many decades ago, before the appearance of any digital audio, most audiophiles agreed that vinyl sucks badly, because the records are degraded after each listening (by mechanical abrasion).

      When the audio CD's appeared, their main claimed advantage was not that they offer a superior sound over vinyl (early units had actually modest characteristics, with 14-bit DACs, modest low-pass filters, and possibly also low accuracy and high jitter of the sampling frequency), but that you can play the digital disc as often as you want without quality degradation.

      Before digital audio, real audiophiles also had a tape recorder, and as soon as they bought a new vinyl disc, they played it only once, to transfer it to a magnetic tape, and then they stored the disc safely and they played only the tape, for fear of degrading the vinyl disc when listening to it.

      At that time, most audiophiles believed that vinyl discs that have been played more than 3 times are no longer suitable as a master source from which to make a copy on a tape, as they were already too degraded in comparison with a new vinyl disc.

      • nikau 11 days ago

        Worth noting that the "tape recorder" was reel to reel not mainstream compact cassette.

        Reel to reel usually ran the tape almost 4 times faster with over 3x wider tape vs mainstream compact cassette, so it was very high quality.

        • iggldiggl 10 days ago

          And eventually even that kind of tape will wear out, too. Though I suppose it might be more of a concern in commercial usage than at home…

          One interesting fact I've come across is that e.g. when Bob Dylan's "electric trilogy" first came out on CD, they apparently had to do new remixes of Bringing It All Back Home and Blonde On Blonde not because they just felt like it, like they so often seem to do these days for artistic and/or sales-tactical reasons, but simply because by that time the original master tapes (including the safety copy) had worn out somewhat through continuous re-pressings of the original vinyl albums.

  • Shorel 11 days ago

    > But with good recordings and mastering

    That's the issue here. The loudness war made any CD mastering a race to make the most compressed track, just to sound louder than the competition.

    Technically, digital should sound better. The technology is better. Sound engineers are making sure this is not the case.

    • nikau 11 days ago

      Exactly - the easiest way to prove this is you can record Vinyl to a CD, do a double blind test between the Vinyl and the CD copy, and you can't tell the difference.

      Vinyl forced better mastering.

    • twangist 11 days ago

      > Sound engineers are making sure this is not the case

      That's pretty offensive and ignorant. The loudness wars ended at least 10 years ago.

  • iamacyborg 11 days ago

    > Vinyl doesn't have nearly the resolution or nearly the dynamic range that a high-quality digital recording will have.

    Not to mention that setting up a tonearm just right appears to be a feat of wizardry, or being sure that the recording was properly mastered for vinyl.

gwern 12 days ago

"The fallout of the MoFi revelation has thrown the audiophile community into something of an existential crisis. The quality of digitized music has long been criticized because of how much data was stripped out of files so MP3s could fit on mobile devices. But these days, with the right equipment, digital recordings can be so good they can fool even the best ears. Many of MoFi’s now-exposed records were on Fremer and Esposito’s own lists of the best sounding analog albums...“One of the reasons they want to excoriate MoFi is for lying,” says Howarth. “The other part that bothers them is that they’ve been listening to digital all along and they’re highly invested in believing that any digital step will destroy their experience. And they’re wrong.”...And Randy Braun, a music lover, Hoffman message board member and lawyer in New York, hopes that, in the end, the MoFi revelation will prove what he’s been saying for years, that the anti-digital crowd has been lying to itself: “These people who claim they have golden ears and can hear the difference between analog and digital, well, it turns out you couldn’t.”"

Hard to imagine a better A/A-test.

  • kstrauser 12 days ago

    That whole line of thinking just blows me away. It's possible to accurately sample and reproduce any vinyl recording in the digital realm. It's absolutely not possible to accurately record every digital recording onto vinyl. For instance, it's not hard at all to make bass so loud that it causes the needle to leap out of the track, or treble so high that the needle can't accurately track the high frequency vibrations.

    In fact, part of the record player spec is the "RIAA equalization"[0] that attempts to account for the fact that vinyl isn't good at recording a wide range of frequencies well. On recording, you cut the bass and jack up the treble. On playback, you boost the bass and reduce the treble. Without that, vinyl would be even worse than it is today.

    It's absolutely, 100% fine for someone to say that they subjectively prefer the sound quality of a record player to a CD. I don't, but that's fine: it's purely a preference thing. But to claim that vinyl is objectively better in some way is just ludicrous.


    • ryukoposting 12 days ago

      I absolutely despise most of the vinyl community. Don't get me wrong, I love my records. I have hundreds of them and I play them regularly. For some reason, almost everyone I come by has this delusion that vinyl is objectively better than a good digital recording. Anyone who dissents from that narrative gets gaslit:

      "oh what kind of turntable do you have? oh that's not good enough, there's your problem right there."

      "what speakers do you have? what about your phono + power amps? oh that's not good enough, there's your problem right there."

      "how did you place your speakers? oh, you should have them at 45 degrees, not 60."

      "is it a re-pressing? from whom? oh, there's your problem right there."

      The end result is a bunch of nerds ruining their credit scores because someone told them they need gold-plated hydraulic bearings in their tonearm to properly listen to their mom's copy of Led Zeppelin IV.

      Does it sound different? Yes. Does it sound better? If you're really trying to get the most out of the music itself, no. Warm ⊄ good.

      Vinyl is great because you aren't just listening to music. The medium demands something from you. It's tactile. The album artwork is a complete ensemble, rather than a little icon on your phone. In my case, I had to put in effort to restore the equipment I play my records on, so there's a bit of pride in it. It's a more intimate experience.

      • JJMcJ 12 days ago

        I remember when CDs were very very new the first review of them in an audiophile magazine a friend subscribed to. The reviewer was quite unhappy.

        The next month he reviewed a different player. He basically retracted his opinion of CDs but said the player from the previous month was obviously terrible, at least the particular one that he did his review on, if not the entire brand.

        And for audiophiles themselves, I notice many of them seem to have very poor taste in music. Like do you really need $50,000 of equipment and sand weighted speakers that weigh 700 pounds each to play 1968 bachelor pad music?

        • CamperBob2 12 days ago

          The next month he reviewed a different player. He basically retracted his opinion of CDs but said the player from the previous month was obviously terrible, at least the particular one that he did his review on, if not the entire brand.

          He could have been right both times. Many early CDs were just plain awful. Same with the first couple of generations of CD players, even some pricy ones. The early development of MP3 and other lossy audio codecs recapitulated the history of digital audio pretty well: lots of truly crappy recordings got passed around.

          Like do you really need $50,000 of equipment and sand weighted speakers that weigh 700 pounds each to play 1968 bachelor pad music?

          I've never understood audiophiles. How can it make sense for me to spend more money on my equipment than the freaking recording studio spent on theirs? Do these people think studios use $10,000 power cords on their sound boards, and atomic clocks to drive their ADCs?

        • gerdesj 12 days ago

          "I notice many of them seem to have very poor taste in music."

          Great response and critique until that point. I'm old (52) enough to have seen quite a few media changes too. I recall that when you were off your tits at a party, and discussing music, you tried to find common ground. That could lead to some impressive contortions!

          Can't say I ever spent much on playback hardware. I generally went second hand for speakers/amps etc. Once the Walkman was invented and then rather a lot of Chinese (and other copies were available) clones appeared then you could ruin your hearing close up with seriously decent quality sound on the move. I was still walking around with a mini cassette player with wired ear plugs in my jacket's breast pocket until around 1993ish.

          I did lay out something like £200 on a pair of decent headphones for use at home. They make anything from O Fortuna to Ghost Town via say Schehehererherereherezade, Finlandia and One sound rather ... Special.

          • JJMcJ 8 days ago

            The term "audiophile" describes someone who indeed spends huge amounts on their audio setup.

            It is different than someone who appreciates music, which it seems like you do.

        • kazinator 12 days ago

          I will have you know I have great taste in total harmonic distortion and frequency response!

      • drewzero1 12 days ago

        I love records (78s and vinyl) for the tactile and visual experience-- and the fact that I can get something for a few bucks at the thrift store and not feel too bad about my toddler ruining it trying to put the needle on. To that end I have stuck to cheap, sturdy, school-grade equipment and mostly secondhand records.

        It's so fascinating to me that an inert physical disc is engraved with sound waves that are reproduced by dragging something along to return them to sound, in the case of the 78s without the need for anything electrical in between. It's an added bonus that it has zero opportunity to inspire screen time for my kid, who absolutely doesn't need to stare at a screen while listening to music.

        • Animats 12 days ago

          in the case of the 78s without the need for anything electrical in between.

          For fully mechanically recorded records you have to go back to pre-1927 Edison Diamond Disks. Or the real deal, Edison cylinders.

          Edison cylinders are actually rather good recordings. The mechanical playback system. with no amplifier, introduced most of the distortion. Modern playbacks, using a modern record pickup with a suitably large-sized stylus, are quite good. Here are some from cylinders made around 1900.[1] Those include Sousa's band playing Sousa's marches, led by Sousa himself.

          The ultimate playback device is IRENE. This was built for the Library of Congress. It does a full 3D scan of the entire disk or cylinder surface, and a detailed 3D model of the surface is created. That's turned into audio by a program that simulates a stylus tracking through the grooves. IRENE is used on very old, fragile items. It's even possible to put broken shards back together in 3D and recover the audio.

          For real authenticity, there are reproducing pianos. These are player pianos, but with a better recording system, one capable of recording key pressure while a live pianist played the piano. While the Duo-Art system had binary-coded pressure values, the Welte-Mignon system was analog. Mostly. Here's a Welte-Mignon roll being played.[2] The holes at the outer edges of the roll are encoding the key pressure. The ones in the middle indicate which keys. MIDI, from over a century ago.

          If you're going to go retro, go all the way. If you just want to listen to music, it doesn't get any better than 24 bit audio. (16 bits may not be enough for really soft passages, where all the high bits are zero and you may be down to 6 bit audio.)



          • drewzero1 4 days ago

            I do have one of those Edison diamond disks in my collection, though no playback device that can handle the vertical signal in the groove. My ~1917 Silvertone phonograph does fine for me with the more conventional 78s.

            My grandpa used to tell me that they donated the clockwork out of their record player as scrap metal for the war effort, so they listened to music by spinning the records by hand and holding a fingernail in the groove. That's something you can't do with pretty much any other recorded medium, aside from print.

      • jgust 12 days ago

        There is a certain ceremony involved with choosing and playing vinyl that cannot be recreated with digital media. That, to me, is the magic. In modern times a full digital setup is going to provide a more "faithful recreation" than anything analog.

        • gerdesj 12 days ago

          Been there. Browsing vinyl involves flipping fore and aft and is very tactile. Browsing tape and CDROM involves running your eyes over them but you can run a finger along them to get another sense involved.

          Loading a record is quite the event: slip out of the card sleeve, then slip the dic out of the waxed paper sleeve and pop it on the spindle without scratching it. There is of course the correct way to handle them that if you are around or older than my age (52), you already know - the delicate fingers on the rim and your thumb on the centre.

          I can remember my Dad going to the "biggest NAAFI in the world" (Rheindahlen) and coming back with a brand new record player in around 1978 or 79. This thing could handle something like five LPs at once and play them sequentially.

          Pissing around with Spotify isn't quite the same and I do understand why people enjoy the theatrics but to be honest: I turned my CDs into FLACs and ditched the tapes a long time ago. I still prefer to buy my music by the CDROM and rip it to FLAC or mp3 or whatever - now that is me showing my age!

          • throwaway81523 12 days ago

            I used to just look at the titles on the spines of my records (back when I had them) to decide what to play. I'd look at one and listen to the music in my head for a few minutes before deciding whether to actually put the record on, or else look at the spine of another record and do the same thing. I could spend hours doing that, and by that time I had to go do something else. I got a whole concert with no equipment at all. That's when I decided I wasn't an audiophile.

          • jamiek88 12 days ago

            I did the same as you but iTunes Match for $25 per year is my ‘vault’.

            It’s very convenient especially now that lossless is an option.

            • macintux 12 days ago

              I have a few songs ripped from CDs over the years that I’ll be very unhappy to lose if iTunes Match ever goes away, since I’ve lost the CDs and as far as I know they simply aren’t online. Such a great service.

              • jamiek88 11 days ago

                Same. A couple of the cds ‘rusted’ and no longer play. Others lost in moves etc.

                I hope we get plenty of warning before they axe it. Imagine that being a google service?!

                • sneak 11 days ago

                  If your Apple ID gets accidentally suspended because of a false positive from the "can't turn it off" clientside CP local file scanning that Apple is planning to roll out to all of our devices, you won't get any warning.

                  • macintux 11 days ago

                    Can we not flog this dead horse?

                  • jamiek88 11 days ago

                    You mean the hash search.

        • JJMcJ 12 days ago

          There is also some with CDs, but vinyl's the real deal. The record cleaner brush. Inspect the needle for dust. Be sure the record is properly seated. Sit back and enjoy.

          • jgust 12 days ago

            Just watching the record spin is so incredibly satisfying.

            • JJMcJ 12 days ago

              Yes, a connection to the physical world.

              Sometimes especially on Zoom I look at my cabling and think it's amazing that images of other people and their voices are going through that cable.

              Only on Zoom and similar video conferencing. For all other uses I don't even think about it.

              • crooked-v 12 days ago

                You may find VR social environments interesting.

            • throwaway81523 12 days ago

              I'm not going to say the date but my birthday is exactly 4 months before a certain holiday. So some years back (too many, alas), on this holiday and 4 months after I turned 33, my friends put on a party to celebrate both the holiday and my 33 1/3'rd birthday. Naturally, LP records were played.

            • adrian_b 12 days ago

              Watching the reels spinning at different rates and the tape moving on an intricate path, in a high-end open-reel tape recorder with multiple motors and multiple heads, e.g. a Revox, was even more satisfying.

      • noduerme 12 days ago

        >> The end result is a bunch of nerds ruining their credit scores

        Hilarious and well put! Speaking as an erstwhile musician, this has been my theory about Guitar Center's business model since the 90s.

      • hbn 12 days ago

        I recently got a record player and have been amassing a small collection of my favourite albums. Including the reasons you gave, my excuse for buying/listening to records is I like having a physical representation of albums I like, and something that won't disappear because a contract expired with a streaming service.

        • ryukoposting 10 days ago

          Stick with it. I discovered some great music buying random stuff from the <$5 section. You'll meet fun people at the right record stores (if you're in Minneapolis, I have some suggestions). Every once in a while one of your LPs will turn into a nice investment piece. If you haven't tried repairing/restoring your own turntable, I recommend it. The engineering inside all the little mechanisms in an old turntable are fun to tinker with.

      • dekhn 12 days ago

        There definitely was a short period in college where I needed to spend money I barely had to upgrade my system. This was when CDs first came out. I could tell, when listening through my stereo (as compared to plugging my headphones into the CD player) that there was a ton of extra noise/distortion and most importantly, a very high noise level (audible hiss). Ended up having to go to Salvation Army to buy a $25 used receiver and the speaker store to buy a pair of $200 speakers before I got decent results. Even after that, I had no end of problems with the analog cable. it took a long time to switch to digital.

        Nowadays I can get excellent audio quality watching good Youtube videos or streaming from my preferred music site (I only listen through headphones now).

        I'm super glad I was able to get to the quality level I liked for fairly cheap.

      • xbar 12 days ago

        Is this not the experience in every human community?

        For the record, I like your approach to music enjoyment.

    • iforgotpassword 12 days ago

      That's the main reason I really like vinyl. Physics prevents the mastering engineers from going overly crazy. Vinyl often sounds more carefully mastered, even though nothing would technically prevent you from releasing the same thing in digital form.

      The other thing I like is that it really takes more effort to put on a record than start a track on Spotify. I really only do it when I can take the time to do so. Pick a record from the shelf, carefully take it out of the sleeve, carefully put it down on the turntable, and then really listen to a full record while sitting or lying on the couch doing nothing else. Again nothing you couldn't do with Spotify or YouTube music, but somehow you (well, at least I) never do.

      • defterGoose 12 days ago

        It's still true that it takes a skillful ear/hand to do that mastering. I've heard terribly mastered older (not abused) records and modern releases that are excellent. A good original copy of Rumours is about as good as it gets IME.

        Vinyl _does_ also provide a nice soft upper limit to the loudness wars.

        • FullyFunctional 12 days ago

          Couldn't we characterize vinyl limitations and capture that as a digital filter? And if so would you be able to tell the difference between the vinyl and filtered digital?

          • iforgotpassword 12 days ago

            It wouldn't work with albums where the mastering is different, especially if the digital release is compressed more. You cannot undo squashed dynamic range really. A famous example from a while ago is the album stadium arcadium by the red hot chili peppers. Comparing the two versions of a song should sound notably different even to a casual listener. And you can really see the difference just looking at the wave forms.

          • toast0 12 days ago

            The premise in this part of the thread is that the mastering engineers will not make a record that exceeds the limits of the medium, and what fits on the medium sounds nice.

            Assuming this is correct, and that the digital mix intended for cds or streaming/downloads outside vinyl's range, you might be able to filter the digital mix to fit in vinyl's range and that might approximate the vinyl mix, but maybe the mastering engineer would make different choices (of course, maybe they just use a filter). It'd be interesting to explore with actual data.

      • kstrauser 12 days ago

        I listened to "Disintegration" last week exactly like that, but with Apple Music. It was the first time I'd listened to an album start-to-finish in years, and I highly recommend it.

        I like not having to flip the record halfway through, or being able to listen to "The Wall" without 3 flips.

        • wk_end 12 days ago

          The structure that side/disc limitations impose is part of the listening experience, to me - I like having to take a moment to consider the sub-narrative of the side as a whole before moving on. Even when streaming I’ll often look up the vinyl track listings to get a sense of the artist’s intended schema.

          • hbn 12 days ago

            > I like having to take a moment to consider the sub-narrative of the side as a whole before moving on.

            That's a great way of putting it! And something I hadn't considered before I bought a record player and started listening to it. There's that point in time where you realize the A-side is done, you get up to go and flip it, and you have a half-minute or so of reflection on the first half. Then the B-side starts and it's like the second act of a play is starting after intermission.

          • kstrauser 12 days ago

            I get it. I still like having the option to skip it if I'm being lazy.

      • conradfr 12 days ago

        That's why I like to download vinyl rips.

        But some vinyls actually come from a digital master anyway.

        • aeyes 12 days ago

          Even if the master wasn't digital, how many vinyl mastering engineers used a digital reverse RIAA?

          I have a ton of vinyl records myself, never understood why anyone would say they sound better. Vinyl is a compressed format, even if the compression is analog. There is significant loss of signal in the whole signal chain. You need to do reverse RIAA (compression), then you fabricate a master, then you press vinyl from this master which is only good for a few thousand presses, then you have the pickup and at last the RIAA preamp (decompression)...

          • kevin_thibedeau 12 days ago

            Don't forget that playback progressively damages the medium. A true audiophool keeps a stockpile of virgin vinyl so they can playback once and throw it away.

    • jrajav 12 days ago

      Most of the time people will argue that vinyl has "warmth" and this makes it subjectively better. This is true, but it's actually because of the pleasing distortion record players add to the music. Being distortion, even if it improves your listening experience (and this depends on genre, though it generally does), it is certainly objectively worse in terms of accurate reproduction.

      • bambax 12 days ago

        YES! The article says this:

        > But a few specialty houses (...) have long advocated for the warmth of analog. “Not that you can’t make good records with digital, but it just isn’t as natural as when you use the original tape,” says Bernie Grundman

        which is absurd. "Warmth" is a kind of distortion, and if a signal is distorted then it's less accurate or "natural"!

        They can't claim "fidelity" and "warmth" at the same time. It's one or the other.

        • AnimalMuppet 12 days ago

          But if analog is what you knew, that wasn't "distortion". That was "natural", because it was what you grew up with. That was the way things were supposed to be.

          So "fidelity" means "fidelity to the way I remember" (and like).

          • yencabulator 10 days ago

            Not "natural", "familiar".

            Just like people buying yellow lightbulbs because that's how incandescent bulbs used to always be -- actual natural sunlight isn't that yellow. Good LEDs are more "natural", but less "familiar" to people.

        • tomc1985 12 days ago

          On a high quality record with a high quality setup, you can have both. It's because the distortion is really subtle, and hits all the right harmonics. On bass-heavy music it makes the bass sound really nice. The other parts of "warmth" aren't really in my wheelhouse, but it makes the bass in bass music better

      • kstrauser 12 days ago

        Exactly. If you like that warmth, awesome. There's not a thing wrong with that. It's when people confuse "warm" for "better" that the problems start.

      • taylorportman 12 days ago

        An instrument amplified by vacuum tubes does have a distinct sound, "vinyl" also has its own signature.. magnetic tape is pretty analog too. All of these signature sounds can be digitized/discretized at sampling rates that preserve the vinyl crackle or tube warmth or combinations. To me it seems like marketing and the consumers justification of their susceptibility.

        • bigiain 12 days ago

          > An instrument amplified by vacuum tubes does have a distinct sound

          Only if it’s pushed into distortion.

          Guitar players (generally) like tube Amos because of the way they distort compared to transistor amps.

          If you are not pushing the amps into distortion, they will only sound different if they’re badly designed.

          • bobbylarrybobby 12 days ago

            Not necessarily (well I guess it depends what you mean by "pushed"), but I think tube amps naturally boost the even-numbered harmonics at all volume levels. This sounds good but is distortion.

            • bigiain 12 days ago

              That’d show up in the Total Harmonic Distortion figure for the amp, and for any halfway hifi quality oriented amp it’ll be well below 0.1%. Perhaps “golden ears” can hear that? I’m not convinced. Most hifi audio amps typically run at well down into the single digit percentage of their rated output at ordinary listening levels in most systems, so they’re an order of magnitude or two away from clipping. If the feedback circuit and the output devices (transistors or tubes) can’t keep the response perfectly linear the thd down under 0.1% across the entire audio frequency band in that power range, it’s just badly designed.

      • mod 12 days ago

        Can't the warmth just be reproduced in a digital player anyway?

        • mrandish 12 days ago

          You can also bake analog sounding warmth into your hi-res digital master and it's done all the time. There are a wide variety of different digital mastering plug-ins which do remarkably sophisticated analog modeling.

          Ultimately, this boils down to signal which vibrates speakers. As a thought experiment, if you use some kind of theoretically perfect surface-sampling laser to capture every movement of the speaker surface at sufficient frequency and fidelity to reproduce all of the information in the original signal and speaker surface vibrations (ala Shannon->Nyquist), then a digital playback of that signal which vibrates the same speaker surface identically will sound exactly the same.

          Individuals can prefer different sonic characteristics encoded in an output but that's an aesthetic choice. The entire signal chain creating that output is the result of creative and technical choices. It goes from guitar string to studio acoustics to microphone to mixing board to outboard processing gear to recording medium to duplication to distribution to playback to amplifier to speakers to room acoustics to human ear. Most of those elements significantly color the sound. Yes, mistakes can be made in the downstream signal chain which diverge from the creative intent. However, those mistakes are exceptions, and not inevitable. Done correctly, there's no reason a digital step in the chain shouldn't be completely undetectable.

          • KennyBlanken 12 days ago

            > Individuals can prefer different sonic characteristics encoded in an output but that's an aesthetic choice.

            I find that listening to one of three different sources (earbuds, gaming headset which is EQ'd via open source software, and inexpensive-but-fancy headphones) causes me to adjust to that particular set of headphones' sound. It seems to be like the equivalent of our brain continuously auto-white-balancing our vision.

            • mrandish 12 days ago

              Absolutely, personal sonic character preferences can vary per content, listening context and the play back device (plus play back signal chain like DACs, pre-amps etc). And it's not just personal taste, most human's bio-based input 'hardware' varies enough to matter, especially for those of us who are out of warranty (ie >40 yrs old). There are even interactive apps which will give you a quick hearing self-test and build an EQ profile based on your individual response curves. I use one bundled into Android and it definitely improves my listening experience.

        • com2kid 12 days ago

          Yes, the "warmth" generated by from literally any possible analog circuit can be reproduced digitally.

          Physics doesn't care about people's beliefs, but sadly many people also don't care about physics.

        • lucas_membrane 12 days ago

          The finding some years back was that the harmonic distortion in tube circuits was even harmonics and in solid state was odd harmonics (or maybe vice versa). This could cause tube electronics to sound better than equally good (by measure of thd %) solid state electronics.

          This says nothing about the difference between analog and digital recording media unless you think that disc lovers shun solid state electronics or something like that. Do they?

          There wasn't much digital sound around when McLuhan said that "The medium is the message." I think that's the substance of this whole brouhaha. What's wrong with rejecting digital media when one deplores the inundating tide of changes in society's tempo, cultural content, aesthetics, and forms of dis-function that have been carried so far and wide by digital media? Isn't change always impugned?

        • analog31 12 days ago

          My son told me that some hip-hop recordings incorporate digitally generated tics and scratches to simulate vinyl.

          • bl0b 12 days ago

            That reminds me of a thread here from a few weeks ago about how somebody was training an ML model to add noise to video, so that the noise-free version of the video can be compressed better but then the noise can be added at playback to maintain the authentic feel of old video.

        • masklinn 12 days ago

          Well yes but that's not actually what the intent was.

          Though I would expect it'd be more of an eq profile thing.

        • EL_Loco 12 days ago

          Sure you can, but then you can't call it 'analog' anymore. But you can reproduce the distort...I mean, the "warmth" with digital filters or whatever and it will pass any blind test.

      • pessimizer 12 days ago

        I still think that "warmth" is a way to describe not actually hearing the separate digital samples subconsciously, and just hearing the sounds gliss into each other. I also think it's an anachronism that comes from way back when the digital sample rate was often a lot lower (and people would insist that their live digital effects sounded as good as analog, when you could sometimes even consciously hear the samples jumping into each other.) Other than that, it seems like something that people project onto music with bassy reverb.

        • Wolfenstein98k 12 days ago

          You cannot hear samples, or the "steps" between them. This is a silly idea that comes from people seeing pictures of the waveform as it is digitally captured and imagining they can hear it.

          You cannot, it is impossible.

          Even with an unrealistically low sample rate (say 500Hz instead of 44.1kH), this will not sound like 500 beats per second as the "steps" occur, but rather will just sound extraordinarily dull, as the Nyquist frequency has dropped to 1kHz, a fairly low tone, and all info above that has been lowpassed away.

          When the signal is changed to analog by the DAC in order to come out of a speaker, the "steps" become smooth curves like any analog waveform. You cannot hear "digital steps" because they cannot be audible - sound is vibration, and it cannot be made into steps in the analog realm.

        • palimpsests 11 days ago

          as the other poster noted, it’s not possible to hear each sample individually.

          what is bassy reverb?

      • christkv 12 days ago

        Reminds me of the tube vs transistor amplifiers discussions where tube amplifiers are supposed to have a warmer sound.

    • cammikebrown 12 days ago

      What’s really funny about this is that although CDs objectively can present a greater dynamic range, the loudness wars have created a lot of highly compressed CDs that do sound worse than a lot of vinyl, where it often seems that more cars is taken with mastering because of the limitations of the medium. Additionally, a lot of early 80s albums sound better on vinyl because digital mastering wasn’t as good then. It is an absolutely night and day difference between my vinyl copy of Unknown Pleasures and my CD.

      • Nav_Panel 12 days ago

        Yep. This is why I like buying original 80s CDs where they just chucked the master tape onto a digital disk, rather than post-2000 reissues where they slap a limiter on the master and jack it up +8 dB.

      • btown 12 days ago

        > it often seems that more cars is taken with mastering

        I know this was a typo, but tools like (with a literal "sedan" button) and articles like are sadly indicative of the emphasis in modern mastering on sounding good on car speakers - which is the entire problem in a nutshell.

        • palimpsests 11 days ago

          modern mastering does not optimize fidelity in a car at the expense of other modes of listening, and these articles do not indicate as such.

          modern mastering does take into account a highly popular listening environment, to ensure that the mix sounds good there as well.

          the second article you posted is talking about using a car as one of several environments in which to test a mix. because it’s a “known” reference in a real-world environment (your ears are used to listening to mastered music on a car stereo).

    • bigiain 12 days ago

      > It's absolutely, 100% fine for someone to say that they subjectively prefer the sound quality of a record player to a CD.

      I love listening to vinyl. But I’m not gonna lie to myself and say “it sounds better”. The engineer/scientist in me knows it doesn’t, and the pragmatist/experimentalist in me knows that even if I can reliably detect differences between a good digital recording and a good vinyl copy of a song (which I’m not convinced I really can) there is nit nearly enough difference ever to say one is better than the other.

      I like the ceremony of playing vinyl. It adds to my enjoyment, but in the kind of way that a Japanese tea ceremony “improves the taste” of tea.

      Also, a long time back I realised that listening to hifi _gear_ leads only to criticism and unhappiness, while listening to great music leads to joy. So I mostly have given up critically listening to “gear”. A great song or album can be a thing of joy coming out of your laptop speakers. Coltrane or Ellen Allien or Polyphia are no less amazingly talented in shitty phone earbuds compared to my thousands of dollars of living room hifi. I’m too old to want to argue about “clarity of soundstage” or “time alignment in the tweeter crossover”, I just want to rock out or dance or groove along to great tunes. I can do that with a 100% analog signal path in my lounge room, or in cheap Bluetooth earbuds inside my motorcycle helmet with a 97db noise floor…

    • FullyFunctional 12 days ago

      Flat earth, Scientology, dowsing rods, ... willful ignorance is hard to fight.

      Anyone with basic understanding of A/D conversion and sampling theory will understand that you can always exceed analog with digital, given enough bits (and 2*16 @ 44.1 kHz is already pretty darn good).

      In the early days of MPEG Audio, Level 2 (not mp3) I spent a lot of time listening to samples and I was taken aback when I finally traced flaws back to the CD itself (Cranberries, Zombie, 1994). Many of the early CDs really weren't that great, but that wasn't due to being "digital", just a sloppy production.

      • mrandish 12 days ago

        Agreed. So much of the early negativity around "digital" and "compression" was due to avoidable mistakes made when mastering some particular pieces of media back in the early days.

    • analog31 12 days ago

      There's no a priori reason why any recording medium needs to have a flat response curve, so long as the curve is known so it can be reversed. The reason for the RIAA curve is that most sound has an inverse relationship between amplitude and frequency. The RIAA recording curve limits the overall amplitude of the groove, allowing for better management of dynamic range and distortion in the cutting and playback processes. The slight lumps in the curve are a concession to practical filter technology of the 1950s.

      Other analog broadcast and recording media have similar curves, called pre- and de-emphasis.

      Digital doesn't need it because it has effectively zero distortion, and dynamic range to spare.

      An advantage of vinyl is that there's a physical deliverable, making it possible to monetize it. I think that's why a lot of indie bands use vinyl.

      • kstrauser 12 days ago

        More people own CD players than record players. Indie bands would be better off selling CDs if that were really the main intention.

        • analog31 12 days ago

          Indeed, that's true. The vinyl thing is probably more about the vinyl trend.

          I go to a lot of "indie" performances, and have the musicians directly: How do I buy your stuff, so you make the most money? The answer is always the same: Buy the CD right here.

    • cratermoon 12 days ago

      > it's not hard at all to make bass so loud that it causes the needle to leap out of the track

      Reminds me of the LP my band teacher in high school had. It was the 1812 overture, and the groves for the cannon shots at the end were easily distinguishable with just a casual examination. Based on what you're saying, I suspect that recording was pushing the limits of vinyl.

      • kstrauser 12 days ago

        Yes! That exact song is perhaps the canonical demonstration of the limitations of vinyl! Here are some pics of the grooves on that LP:

        • cratermoon 12 days ago

          Oh, very nice. That's exactly I as I remember it.

      • cwillu 12 days ago

        I'm imagining a recording of a nuclear blast with sufficiently deep grooves to accurately reproduce the shock wave.

        With the satisfying full warm tone vinyl is known for.

        • wrycoder 12 days ago

          Fermi just dropped small pieces of paper :)

          • cwillu 11 days ago

            Was going more for: “Rabbit hands Duck a phonograph of a nuclear detonation. Duck carefully places the needle on the record. Duck sits quietly in front of the phonograph's horn. Blastwave from nuclear detonation is emitted from the horn while Rabbit looks at the viewer smugly.”

    • brigandish 12 days ago

      > For instance, it's not hard at all to make bass so loud that it causes the needle to leap out of the track

      I was a drum and bass dj when it was all still vinyl. Even in a club with huge speakers, I've never seen the needle jump due to the bass (although some places used to tape a penny to the top of the headshelf). The weighting on the tone arms can be adjusted so if you've got a needle dancing around it's due to your set up, not the bass, or Jungle music wouldn't have lasted too long.

      • crtasm 11 days ago

        They're not referring to amplified sound. If you press a record with too much bass on it the 'wobble' of the groove itself can end up so extreme it'll make the needle jump out - no speakers required.

        • brigandish 13 hours ago

          There's an awful lot of bass on drum and bass records and yet I've never seen a needle jumping because of it.

      • kstrauser 12 days ago

        See my other comment here about the 1812 Overture.

      • iamacyborg 11 days ago

        Same deal with dubstep records.

    • wrycoder 12 days ago

      The thing I miss with the Apple audio chain is a user-controlled equalizer. With my hearing issues, I really need to boost treble, and I prefer to boost bass. I haven't yet discovered a way to do that. Apple thinks that flat is best, and so should you, apparently.

      • egypturnash 12 days ago

        On OSX Music, window>equalizer. You can also grab Rogue Amoeba’s “SoundSource” to have volume controls for every noise-generating app on the computer, and apply effects chains to them, including EQ.

        • kstrauser 12 days ago

          I love SoundSource so much. I bought it so I could use the volume keys on my keyboard to adjust the system volume on my HDMI monitor. I was blown away when I found out I could plug my collection of VSTs into the output pipeline.

          • egypturnash 12 days ago

            Yeah, adjusting the volume on my monitor was really the reason I bought it, too. All the other stuff's a nice bonus.

        • wrycoder 12 days ago

          Great, thanks very much. All their products look useful.

          I've tried Sound Source and not only do the eq's work, but I can boost the volume so I'm listening at 6/10, where before I was at 9/10 and had no headroom.

          I knew I'd get an answer by saying something wrong on the internet.

      • bitcurious 12 days ago

        On iOS, settings>music>EQ has some presets you could try. Not quite the same as custom eq but might be better than flat.

        • ultrarunner 12 days ago

          And it's insane that this hasn't changed for at least a decade! Apple's own PowerBeats Pro sound like garbage without bumping up the low frequencies, but with an equalizer they sound great. Or maybe this is just subjective and you can file it under "accessibility".

          I was jailbroken on iOS 14 for the longest time solely for a system-wide equalizer for Apple Music. With a new phone it's a major step back, and I've switched to Spotify for their (worse) equalizer and somewhat worse overall experience (Spotify doesn't even have an equalizer on desktop!)

          It's really unfortunate that such a straightforward feature is so limited on Apple platforms, and for no discernible reason.

      • ben7799 12 days ago

        There are hearing accommodations in iOS that can even use your audiogram.

        Settings -> Accessibility -> Audio/Visual -> Headphone accommodations

        • wrycoder 12 days ago

          Yes, I've used a couple of those iOS apps, but the end result is not boosted enough in the higher frequencies. My $500/pair of MDhearingaid Airs work a lot better, but they don't connect to my Apple devices.

          I also have the latest AirPod Pros. With Apple Music, they are not too bad, but Apple is preventing me from having enough volume. I switched to Tidal - the sound is better, and their overall audio out level is higher than Apple. (Tidal also has notes on the music and the bands like the liner notes in the old days.) I tried Idagio, but their output level is even lower than Apple's Music. Basically, I couldn't hear the music well enough to bother with them.

          If I play music on my sound system at a comfortable level, and ask people, "Is it too loud for you?", they say, no, it's fine.

          The other problem I have with the AirPod Pros is their transparent mode doesn't provide any gain or much EQ for external sounds (even with the audiogram), so I can't hear people nearly as well as I can with my cheap hearing aids. I still have to remove the AirPods and put my hearing aids on, if I want to talk with people in anything but a silent room.

          What I need more than anything else is compression. I can hear loud sounds fine - in fact, they bother me. What I can't hear any more is quiet sounds. That's what I need amplified, along with treble boost to compensate for my aging ears.

          Apple is really missing a market here for OTC hearing assist. They have all the tech needed, even already built into existing hardware - AirPod Pros are an engineering marvel. They are holding back for some reason, probably some contractural arrangement we're not aware of.

    • amelius 12 days ago

      > On recording, you cut the bass and jack up the treble. On playback, you boost the bass and reduce the treble.

      Sounds like if you combine the two steps you end up with the identity operator :)

      • mturmon 12 days ago

        It is the identity for the signal, but RIAA equalization cuts the high-frequency noise that's characteristic of needles in grooves.

          signal -> [HF boost] -> [needle adds HF noise] -> [HF cut] -> same signal, less HF noise
        As for the low end, cutting the bass helps to control the size/excursions of the grooves, which are rather close together (

        Dolby B for cassette tapes is the same idea (but only for the highs).

      • colejohnson66 12 days ago

        That’s the idea, in theory. But because analog components such as the resistors, capacitors, and transistors will not be identical[0] between the master and player, it’s not perfect.

        [0]: you can get very low tolerance resistors and capacitors, but they’ll cost you

      • kstrauser 12 days ago

        To a point, but remember that you're dealing with low-bit floating point math. That boosting stage creates information that wasn't originally there. That's not so bad in the treble case where original * boost / filter is pretty close to the original. But in the bass case, original / filter * boost might be significantly different than the original. That's usually not a huge problem because the low bass frequencies are pretty forgiving, but it's something to consider.

      • Jaxan 12 days ago

        That’s the point!

        • amelius 12 days ago

          Parent was trying to show that

          > It's absolutely not possible to accurately record every digital recording onto vinyl.

          Outlining an idempotent process of recording and playback does not help there.

          • kstrauser 12 days ago

            If they were idempotent, yes. But they're not. Analog processing can't be perfect, and amplification is an inherently noisy process. The RIAA curve first cuts the signal on the bass end of the spectrum, throwing away information in the process (because vinyl doesn't have infinite resolution). Then it amplifies that degraded signal.

            You can simulate this pretty well with computer speakers. Turn down your audio outputs so that it's barely audible, then turn up the speakers as load as they'll go. Noisy, isn't it? In theory that should be the same as turning the outputs to their maximum clean level and turning your speakers way down, but in practice it's absolutely not. Well, every vinyl record made does exactly that to the bass.

    • bigbillheck 12 days ago

      > It's absolutely, 100% fine for someone to say that they subjectively prefer the sound quality of a record player to a CD.

      There's a lot of weirdos out there, but these ones aren't hurting anybody.

    • staticautomatic 12 days ago

      I’ve heard stories about things like the cannon sounds in the Telarc vinyl of the 1812 Overture blowing out unfiltered speakers. Are they myths?

    • kazinator 12 days ago

      > 100% fine for someone to say that they subjectively prefer the sound quality of a record player to a CD

      It's not intellectually fine, only fine in the sense that it's well within the bounds of free speech.

      • NovemberWhiskey 12 days ago

        No; it's really fine - same with tube amps etc. It's OK to have a subjective preference for some kinds of distortion. It's not OK to say it's "truer to the original sound", which is where this usually comes off the rails.

        • kazinator 12 days ago

          Sure, if the artifact you prefer actually exists and you can confirm it in a double blind test.

          • wolrah 12 days ago

            You're not wrong in the general "audiophile" world where fools and their money are parted over snake oil magical cables claiming benefits only those with the most golden of ears can enjoy.

            Where you're getting pushback is that this thread is talking about vinyl records and tube amps, things where the noise and distortions introduced by their operation are well known, well documented, audible to anyone with normally functional ears, and regularly utilized artistically. These are not the inventions of grifters with a product to sell, it's just an older technology that is less precise in a certain predictable way which some people find pleasant.

            • Dylan16807 12 days ago

              It's relevant to the article, where a digital source made from a tape should sound the same as the tape.

              • wolrah 9 days ago

                Right, but this subthread is about it being fine for people to prefer the sound of less accurate systems, just not to claim those systems are objectively superior.

                The poster I'm replying to is then acting like it's some weird audiophile belief that records sound different from other media.

                On the topic of the overall article, of course the people who believe a digital processing step makes things inherently worse are absolutely off their rockers.

            • kazinator 11 days ago

              A quality tube amp for audio reproduction (not guitar playing) has very low distortion.

          • cwillu 12 days ago

            “I prefer bit of oregano on my pasta.”

            “Not without a double-blind test you don't!”

            • pessimizer 12 days ago

              "The pasta you just said was the best pasta you ever had didn't have any oregano on it."

              • cwillu 12 days ago

                There was no cilantro in the dish you just said was delicious: we substituted dove-brand soap shavings.

      • Edman274 12 days ago

        A digital recording has to be mastered with the understanding that it could end up getting played on a car stereo, on a bluetooth boombox, on cell phone speakers, in bluetooth earbuds, at a dance party with a DJ or on a hi-fi stereo setup that looks like the one from the old Maxell "blown away" ad. A recording on a vinyl record doesn't. The person mastering a record doesn't need to care about bluetooth earbuds, car stereos, cell phone speakers, boomboxes, and only marginally about DJs at dance parties. They can tune their mixing and mastering decisions to just the case of a hi-fi stereo setup with an enthusiast listening. They have to make fewer compromises because there are fewer cases to handle. The format enforces those constraints. You can't just ignore that.

        • mrandish 12 days ago

          > They can tune their mixing and mastering decisions to just the case of a hi-fi stereo setup with an enthusiast listening.

          This is what audio purists should be asking for. Let's pay the creative production team to create and release a high-fidelity digital mix optimized for us. No concerns about radio play, boomboxes or loudness wars. Just their original creative intent.

          • Syonyk 12 days ago

            If there's a "high bitrate" (24-bit, 96kHz FLAC or something like that) master, often enough that will be the case. You can reasonably assume that someone who's buying that version of the track has something capable of playing it back sanely. Same with the "high def audio" formats (SACD, there was another one...) - they often did, in fact, sound better. Not because of the high resolution, so much as because they were mastered to be listened to on a competent system, not on the subway on earbuds.

          • jamiek88 12 days ago

            If tidal offered that it would be good value and a real differentiator.

        • kazinator 12 days ago

          Nobody who is mastering records gives a damn about bluetooth boomboxes or phone speakers; and there is no way to optimize for a phone speaker and the "Maxell blown away" stereo setup.

      • kstrauser 12 days ago

        I subjectively prefer to add sriracha to my burrito. That's intellectually fine. It doesn't make it an objectively better burrito.

        • kazinator 12 days ago

          Yes, because the sriracha can be confirmed to exist.

          If you say that waving your hand over the shriracha while murmuring a magic incantation makes it taste better, then that may not be so intellectually fine any more.

  • nerfbatplz 12 days ago

    Not only can you not tell the difference between analogue and digital, you also cannot tell the difference between lossless and properly transcoded MP3.

    Most audiophile mania is poorly informed at best and astrology at worst.

    • Maursault 12 days ago

      > you also cannot tell the difference between lossless and properly transcoded MP3

      I'm not sure what you mean by "properly transcoded," as though there's a scourge of bad encoders out there and everyone has nutty encoding practices, but I really, really bet you can. Listen to an mp3 of a rock/pop track. Try to focus on the cymbals. See if you can isolate them aurally from the rest of the music. Can you hear how mp3 encoding completely munges high frequencies to sound like digital glass breaking? Then you shall finally understand why mp3 encoding has always sucked, and Napster really, really should have won.

      • kimixa 12 days ago

        Many mp3 encoders cut off really high frequency stuff - somewhere between 16khz and 20khz depending on the encoder. Often this isn't changed by any of the quality settings, e.g. on lame it's still enabled on the "insane" preset without manually disabling it.

        While that's on the very top-end of human hearing - most by middle age can't detect anything above 14-16khz, but it's certainly possible (especially for those younger) to have frequencies all the way up to 20khz as audible.

        So it is possible for some people to hear a difference with some mp3 encoders, no matter the bitrate or quality settings.

        And the psychoacoustic model is going to focus on the "average" listener, so it's perfectly possible that an lower bitrate encoding is transparent (IE: Completely indistinguishable) to one person, while another may be able to notice higher frequencies that have been cut off to provide more quality in the more noticeable parts of the spectrum. Or even the same person at different ages. This is completely physical difference, and no amount of training or harder listening would be able to bridge the gap.

        And I find many of the higher frequencies that are hit by such things are often not particularly noticeable unless you're actively looking for them, being able to tell there's a difference and knowing what to specifically look far isn't the same as saying the recording is somehow less enjoyable due to quality differences.

      • Nav_Panel 12 days ago

        ^ yeah exactly. Also, you really do need a pretty good sound system to hear it. I was with the poster above you for a long time, but then I did blind A/B testing on my buddy's $10k monitors, and the difference was clear.

        I wouldn't call it "night and day", but I had no trouble distinguishing even 320 MP3 from FLAC on his system by focusing on the very high frequencies (3/3, small N I know I know, but I felt like I could've gone on indefinitely). The MP3s lost some clarity in the highs which led to less dimensionality/sense of space ("soundstage"), because our spatial hearing is very attuned to minute transient differences in high frequencies in particular. But you need to be listening on a system that is adequately equipped to reproduce very high frequency transients accurately, which most people don't have access to.

      • conradfr 12 days ago

        The encoders of today create really good mp3 even at 192kbps (at 128kbps not so much which is a shame as a lot of internet radios use that).

        Do you have a favorite rock track we can do an ABX test with?

        • user_7832 12 days ago

          Not the person you replied to, but Hotel California’s Hell Freezes Over version is generally very well regarded in mastering.

          If I’m not mistaken one of those A/B/X test websites also tested that, and while I was using a very simple pair of headphones, the difference was noticeable.

          • Maursault 12 days ago

            > Hotel California’s Hell Freezes Over version is generally very well regarded in mastering.

            Never heard this, but I know the original track is used for reference in studios from LA to NY, and is generally regarded as among the best mixes ever engineered.

            Another commenter suggested high end audio equipment and $10K monitors... not necessary. With any off the shelf hifi, $100 worth of equipment, one can easily hear mp3 high frequency problems. Focusing on the cymbals just makes it obvious.

    • bayindirh 12 days ago

      As a former orchestra player I can say that, with a good hi-fi system, the difference is audible, in terms of soundstage size/depth, not in details.

      I have a couple systems, one is a proper hi-fi system. If the album is mastered without brick-wall normalization, the difference is easier to hear.

      When I listen the same album via my DAC, from MP4, I enjoy it. When I listen the same album, from a CD, I sit in front of the system like a rabbit blinded by lights.

      The DAC is the same. It’s a Yamaha CD-S300 with a proper iPod interface, which carries the signal digitally till DAC.

      This ABX test is the same. You need a high fidelity chain to enjoy it. I have a nice sound card, but the speakers connected to it can’t handle the resolution put out by it.

    • Night_Thastus 12 days ago

      Those are two completely different situations.

      I'm not a fan of analog, but a high-end analog system will sound far different than a similarly priced digital one. It's a very different type of sound.

      Whether someone likes it or not is personal preference. But it does sound night-and-day different to listen to a vinyl from a turntable and using a DAC.

      As for MP3 vs lossless, that's mostly true assuming a modern variable bit rate MP3 on OK hardware. The better the audio, the better the equipment, the more noticeable it gets. But yes, for 95%, it's basically not significant.

    • MivLives 12 days ago

      Badly transcoded mp3s are the worst. For most artists I couldn't tell the difference between a v2 and a flac. There were a few who you could but they're mostly not what people are listening to (intentionally very noisy artists). Realistically if I just heard them blind I don't think I would have cared.

    • havblue 12 days ago

      As an anecdote I've noticed that while driving, the bass line in YouTube music jazz can be incredibly hard to hear despite my shelling out for the premium Bose sound system that can shake the vehicle. So I wonder whether this is the encoding or whether it's really supposed to be that quiet.

    • brigandish 12 days ago

      There's definitely some difference in quality with some music. For instance, the reverb will be slightly better with lossless, in my opinion. Some might say it's not much to bother with but it's definitely there.

    • Tao3300 12 days ago

      Cymbals always sound like bubbling shit in mp3.

      • Night_Thastus 12 days ago

        MP3 is not monolithic, and has changed drastically since it was released.

        You're going to get a pretty terrible experience with MP3 128kbps, whereas modern variable bit rate schemes can actually be quite decent. Personally I prefer to always go lossless, but for most people on most systems, the difference isn't noticeable. (Moreso the better the system gets, ofc)

        • iggldiggl 10 days ago

          > MP3 is not monolithic, and has changed drastically since it was released.

          To some extent certainly, though I think that e.g. the handling of short sharp transient remains somewhat of a fundamental problem of MP3 no matter how much bitrate and encoding brain power you throw at it, and was only really improved upon in the subsequent generation of codecs, i.e. like AAC, Vorbis or Opus.

          • Night_Thastus 10 days ago

            True, though I think variable bit rate MP3 is fine enough for most.

            But the main reason is that it's so ubiquitous. If you're buying music, it's almost always MP3 unless you go to a source like Qobuz which serves FLAC. Same with devices - basically everything supports MP3. Vorbis and Opus support is far patchier.

            • iggldiggl 10 days ago

              > unless you go to a source like Qobuz which serves FLAC.

              Apple is another odd one out there by only selling music as AAC, and Bandcamp gives you a comprehensive choice of all sorts of formats.

              > Same with devices - basically everything supports MP3. Vorbis and Opus support is far patchier.

              True that, though AAC support might also be somewhat reasonably common-ish these days. (Though I've found that apart from also having a relatively low folder count limit in general, my car radio also has some difficulties with reading the metadata in some files, and as far as I can tell I think the affected files are all MPEG-4 files. It's only some MPEG-4 files that are affected, though, but I haven't yet bothered to find out what exactly else they might have in common.)

              • Night_Thastus 9 days ago

                I wish everyone was on Bandcamp. It's such a great service. It's so flexible. And unlike Qobuz, it's website is actually decent.

        • Tao3300 12 days ago

          > Personally I prefer to always go lossless

          Oh? Why's that?

          • Night_Thastus 11 days ago

            While I likely wouldn't notice the difference, digital space is so cheap now that it costs me very little to store everything I want as lossless copies. Even if the difference is negligible, there's little reason not to get the best quality I can.

            The main reasons why not would be streaming (currently Qobuz is the only one I know of that does it properly, and services like Roon + Qobuz can get pricey) and bluetooth (which doesn't support lossless at all).

  • apohn 12 days ago

    >The fallout of the MoFi revelation has thrown the audiophile community into something of an existential crisis.

    Don't worry, the crisis will not last long. Audiophiles will find a way to get over it and buy some better cables that would have revealed they were using a Digital source all along.

    • floren 12 days ago

      Cables are all well and good, but the quest for perfect audio will continue until somebody invents a gadget which makes you 15 years old again, hanging out in your friend's basement, having just tried pot for the first time and hearing Led Zeppelin III on a cheap Sears record player. I don't know exactly what this gadget will look like, but it's the only thing that will get audiophiles the sound they've been chasing.

      • jamiek88 12 days ago

        Yes, there’s deffo something to that.

        Hence the cassette revival for those of us of a certain vintage.

        • toast0 12 days ago

          I think I'm in the right vintage for that, but did cassettes ever sound good? I could get nostalgic for the sound (especially fast forward/reverse, which is lovely), and I probably never had good equipment, but tapes were always kind of warbly for me. I had access to older records too, which could sound good when there wasn't too much hissing and popping and they weren't skipping. Some records were maybe off balance? and wouldn't play at consistent speed either. Again, I didn't have great equipment.

          • apohn 11 days ago

            >I think I'm in the right vintage for that, but did cassettes ever sound good?

            Compared to CDs? Definitely not! Not to mention how many people listened to homemade mixtapes and copies, which made the audio quality even worse.

            Did they sound good enough that you could dance, relax, have a good time, be consoled when you were unhappy, or whatever people did with music? Absolutely.

            Even when CDs did eventually come out, I far preferred a WalkMan to a Discman. I could put a Walkman in one pocket and a cassette in the other. That wasn't easy with CDs.

            • jamiek88 11 days ago

              Yep plus early ‘discman’ didn’t have anti skip and battery life was terrible.

              Cassettes we’re easy to remix, record, share.

              The physical mixtape was a cultural touchstone of romance and friendship for a while there.

              So yeah, I guess ‘good enough’.

              • apohn 11 days ago

                >Yep plus early ‘discman’ didn’t have anti skip and battery life was terrible.

                I had completely forgotten about the development of anti-skip. And now that you've made me remember it, I suddenly feel old.

                I knew somebody (with very rich parents) who basically had a shoulder bag (read: man purse) so he could carry around his Discman (early Sony version, no anti-skip), an extra CD case or two, and an extra set of batteries. It was awful.

    • user_7832 12 days ago

      > Don't worry, the crisis will not last long. Audiophiles will find a way to get over it and buy some better cables that would have revealed they were using a Digital source all along.

      You don’t need to attack any person or community - especially given that rich people buying expensive stuff is hardly hurting others directly. Please make good faith arguments.

      • bambax 12 days ago

        > especially given that rich people buying expensive stuff is hardly hurting others directly

        Superstition is always bad.

        • user_7832 12 days ago

          If superstition is always bad, I take it you're also annoyed/angry at Wayne Gretzky or Serena Williams? Or any athlete engaging in superstition?


          • bambax 12 days ago

            I have never heard of Wayne Gretzky; Google tells me he's a hockey player. I don't think I have ever seen a match of hockey in my entire life. I'm not annoyed by what I don't know.

            But the "superstitions" that the linked article mentions, are rituals, lucky charms. They're much less dangerous than going around pretending that something exists, that provably isn't there.

            Audiophiles are moon-landing deniers. Some might think it's funny or harmless. I think it's terrifying.

            • user_7832 9 days ago

              > Audiophiles are moon-landing deniers.

              Sorry, but I do not follow how you came to this conclusion, could you explain it?

              > They're much less dangerous than going around pretending that something exists, that provably isn't there.

              By your definition is every person in the world who believes in god therefore dangerous?

      • Sporktacular 12 days ago

        If they just bought it and shut up about it maybe.

  • throwawaycities 12 days ago

    > Hard to imagine a better A/A-test.

    In part it goes to prove Mark Twain’s quote that it’s easier to fool people that to convince them they have been fooled. So many people build their identity around being something like an audiophile and something like this demonstrates the are mostly frauds…not all of it is a bad-faith fraud either which makes it so much more difficult for those people who believed they had a genuine passion and talent to accept.

    On the other hand there are people who really don’t give a shit and just shill themselves in a given industry to make money as self-proclaimed experts. It’s part of a sickness social media pushes on people where they think they are brands…as opposed to actual humans. These people have no allegiance and will readily move on the the next money making opportunity so long as they can…probably high priced wines.

  • allears 12 days ago

    That's a little simplistic. You can certainly tell the difference between a good analog recording played on a high quality system vs. an MP3. But once you throw enough samples and bit depth at it (more than are on a standard CD), you get quality that's equivalent to, or better than, most analog media.

    • jrajav 12 days ago

      44100hz sample rate is enough to reproduce well above the highest frequency even young humans can hear, and 16 bits of depth is enough for 96db of dynamic range, enough to make the noise floor of any consumer system totally inaudible.

      Standard CDs might not be good enough for archival and further production work (where you also need wiggle room for further processing or format changes), but they have plenty of headroom to reproduce any kind of sound for playback purposes. Any more is just placebo.

      • doix 12 days ago

        So it's been many years since I looked at this stuff, but the reason for higher sample rate isn't to do with humans being able to hear over 20khz. If you sample at 44khz you need a high pass filter at 22khz to avoid aliasing. Since that's pretty close to 20khz, it needs a pretty sharp drop off. Having a filter with a sharp drop off can introduce artifacts.

        With 96khz sampling rate, you don't need as a sharp drop off in your filter.

        The above is mostly accurate, hopefully someone else will comment and tell me how I'm wrong and correct the inaccuracies.

        Edit: to anyone reading this, read the replies if you want the correct explanation. To everyone that replied, thank you :).

        • kazinator 12 days ago

          You are correct; with a 96 kHz sampling rate, you don't need such a brick wall filter. But then you dohn't have to actually keep the data at 96 kHz; it can be reduced to 44, this time using a digital filter.

          A sharply cutting off analog filter is expensive to produce. It has multiple stages to create the multiple poles. High precision resistors and capacitors have to be used to get all those circuit stages to line up. The filter will have phase distortion.

          That's the basis of "supersampling": sampling at a higher rate with a simpler filter with less of a cutoff, then completing the job with a digital filter to get to the target sample rate.

          This can be done in reverse, in reproducion. Take, say, a 48 KHz signal, and digitally interpolate it to a higher sample rate like 96 KHz. That is fed to the DAC. The filter after the DAC then doesn't need such a steep cutoff after 20 KHz. A greater bit depth can be used; like 16 bit samples interpolated to 24 bit at a higher rate, fed to a 24 bit DAC.

          The digital filter or interpolator doesn't care about accurate resistors, capacitors or drift in component values over time or due to heat; it does the same thing with the same data every time.

          Digital filters can look at future values also. The state of an analog filter is determined by only the current and past values of the signal; but digital signal processing can delay the signal a little bit and look at a "box" around the current value. I think that is key to preserving phase relationships.

          • PaulDavisThe1st 12 days ago

            > with a 96 kHz sampling rate, you don't need such a brick wall filter.

            This is incorrect. See my comment above/below.

        • ajross 12 days ago

          That's the "further processing" notion the grandparent comment talked about. A correctly processed signal at 44.1kHz is more than sufficient to reproduce all audio. But if you're going to do something with the sample series (like low-pass it for aliasing protection in your example, or to resample it for conversion, or for any effects or mixing step really) it's good to have extra data in there to prevent headaches. Likewise sampling at 24+ bits prevents accumulated error in repeated processing, etc...

          There's a space in the audio world for more bits of data. But the final output format isn't where it belongs.

        • PaulDavisThe1st 12 days ago

          [ EDIT: contents of this post were factually incorrect. What Kazinator wrote in response is correct, and I don't want to leave incorrect ideas floating around. ]

          • kazinator 12 days ago

            If the goal is audio capture and reproduction, the filter used when sampling at 96 kHz still starts rolling off at around 20 kHz. The wrap-around aliasing artifacts do not begin until around half of 96 kHz, or around 48 kHz. So the filter only has to be steep enough to hit a large attenuation at 48 kHz: full signal to virtually nothing over the space of 28 kHz.

            If you're sampling at 48 kHz, the signal has to be severely attenuated already; it has to go from 20 kHz to deep cutoff in just the space of a few kHz.

            At 96 kHz can achieve the effect as if you were sampling at 48 kHz, with a steep filter. You sample at 96 kHz with a milder filter, and then purely in the digital realm, you down-sample to 48 kHz. There is an overall filter consisting of the original analog one plus the digital processing.

            That is cheaper and more reliable than doing it all in analog.

            An analog filter with a steep cut off will be challenging in mass production because of the strict component tolerances.

            Sure, you could use a steep filter with 96 kHz also. Say, a steep filter that starts cutting off at 30 kHz. It would still be a less demanding filtering application because of the margin that you have in the frequency domain. The multiple poles of the filter don't have to be lined up as well. E.g. if the first pole starts rolling off at around 30 kHz, and then next ones at 31, and the third one at 28, ... it doesn't matter because you're still hitting the absolute target of there being next to nothing at 48 kHz, and nearly the full signal at 20 kHz.

            • Sporktacular 12 days ago

              Sure, but going to disagree about the numbers there. I have a DAW interface which is exceedingly linear (+/- <0.15 dB) up to 35 kHz. Don't need to start filtering so low to hit those results.

          • mturmon 12 days ago

            This explanation loses me at "infinity per dB" ... and I'm an EE. I think you're trying to cover too much ground here, it's really confusing to try to understand what you mean.

            I believe the comment you're responding to is talking about the analog filter that is needed to avoid aliasing -- as the first words of your comment correctly note/explain.

            And in particular, the original comment seems to be noting the phase distortion (in frequencies near the cutoff) that analog brick-wall filters will cause. This has been a design contention for decades, really, ever since the CD format was introduced.

            It's a big design space, with options for gentler analog filters, followed by very fast digital sampling, and further tricks with filtering in the digital domain, where you don't have to worry about getting great capacitors, etc.

            It may be out-of-scope to lay all that out in one paragraph!

            • PaulDavisThe1st 12 days ago

              That's why I had some blank lines in there :)

              You're right that its a big design space. The key takeaway is that "yes, higher sample rates can actually make a difference, but almost entirely down to the filter design, not because Nyquist moves ... and you probably cannot hear the difference."

        • TylerE 12 days ago

          Yes, i hate when people talk about Nyquist as if its some Panacea.

          Its vwry “spherical cow”. It assumes all your filters, DACs, are perfect, and that time is infinite.

          • PaulDavisThe1st 12 days ago

            Nyquist isn't about such assumptions at all. It is an information theoretic value, based on the provable claim that there is zero information present in the original analog waveform that is not represented in the digital version.

            Yes, your filters, DAC and speaker wire could still create a less than ideal listening situation, but the fundamental aspect of the Nyquist frequency is not concerned with any of that.

            • kazinator 12 days ago

              There is zero information present in a waveform that is not contained in the digital version, if that original waveform is confined below the Nyquist limit. Either it is that way already, or else is derived from an original-original waveform that isn't, by low-pass filtering.

              • PaulDavisThe1st 12 days ago

                That's an excellent coda/qualification of what I said. Put into a more listener centric context: there's no audible information in a waveform that is not captured by sampling it at 44.1khz.

          • masklinn 12 days ago

            The exact same spherical cow issue applies, with worse effects, when you increase your sampling rate unnecessarily.

            And you can use oversampling to correct for the filtering issues. That's pretty standard in modern DACs and ADCs.

          • Dylan16807 12 days ago

            You only need so much margin, though.

        • NovemberWhiskey 12 days ago

          That's fine - but, to the extent that's true, it's true only about the recording and mastering process. CD, as a delivery mechanism, is totally fine and perceptually flawless.

      • tzs 12 days ago

        > 44100hz sample rate is enough to reproduce well above the highest frequency even young humans can hear

        It's enough to reproduce well above what we can hear by the normal mechanism that we use for most of our hearing (sound vibrates the eardrum, which vibrates some tiny bones in the middle ear, which cause fluid in the cochlea to ripple which disturb sensory hairs which we perceive as sound).

        Ultrasonic sounds can be conducted to the cochlea via the surrounding bone bypassing the eardrum and middle ear. Those bone conducted ultrasonics can be perceived. See [1].

        This is probably not important in music except in maybe a few rare cases.

        I'd still like to see better frequency handling though, so that our music wouldn't sound terrible to the dogs and cats that are forced to listen with their owners. We can't normally hear much past 20 KHz (more like 12 KHz for many of us), but they can.

        There are several musical instruments that have significant ultrasonic output. It would be an interesting experiment to see if dogs and cats like those instruments live better than they do recorded (or dislike live less than they dislike recorded). Then compare to the same experiment but with instruments that don't have ultrasonic output.


      • kazinator 12 days ago

        Not only that, but what you hear at those upper frequencies isn't tone anyway. the highest harmonics of tonal sounds live in that region, plus aperiodic signals (the hiss from sibilants, cymbals crashing, and so on).

        The content can be faked, and this is used in low-bandwidth codecs and such.

      • bayindirh 12 days ago

        > Any more is just placebo.

        This is a very simplistic view of things, on many fronts, but I'll try to be as concise as possible.

        In a classical wind/bow orchestra, there are more harmonics at play than the 20Hz-20KHz band, and these harmonics affects our perception of the sound and soundstage. However, recreation of this is very hard, because you need both recording and playback chains which can handle these harmonics as well.

        To faithfully reproduce such orchestra, you need a speaker for every instrument, ideally with the exact air movement capacity of the instrument you're mirroring. This is not practical. Instead we mic all of them, mix all of them, and add room echo to the mix to capture harmonics as best as we can.

        However, this can't replicate some instruments anywhere around its real sound.

        Examples are Turkish qanun [0] and Chinese guzheng [1]. These instruments sound bland, flat and shallow on all recordings, but listening them live, directly with your ears is a goose pimlples inducing experience. Higher end stringed instruments have a similar vibe to them.

        So, a 16bit/44KHz signal at 20Hz-20KHz band cannot reproduce these instruments with any faith.

        Standard CDs, high quality vinyls, lossless files carry a lot of information, but not all information we can process with our ears. Like how even the best digital cameras cannot reproduce the colors we can see with our eyes.

        Reaching these resolution levels are neither cheap, nor practical, hence we use what's practical.

        As a result, your master-pressed-vinyl possibly can't carry this information either, because the recording chain was not able to capture that amount of information, even if you went all the way to install your own power pole to feed clean power to your impossibly expensive audio equipment with all that capacity to reproduce that sound.

        IOW, you can't extract the sound which is not there to begin with.

        Your friendly ex-orchestra player reported from its AKAI-AM2850.



        • tzs 12 days ago

          > To faithfully reproduce such orchestra [...]

          It has never been clear to me what the goal of home playback is supposed to be.

          Let's simplify from a full orchestra to just a solo piano. Is the goal

          1. to sound like it would if that piano was being played in my living room, or

          2. to sound like what I'd have heard if I was there in the concert hall sitting in a good seat when the recording was made, or

          3. to sound like what it would sound like if a replica of my living room was built inside the concert hall but with walls that do not transmit sound, with my speakers replaced by speaker-sized holes in the wall behind where the speakers normally sit, and I was sitting in that replica living room during the concert?

          • bayindirh 12 days ago

            Normally, it’s “2”. Music is mastered to transfer you to the place where it’s recorded. Mastering is just tuning the sound to fit into your music system limits, while keeping the atmosphere as much as possible.

            ABBA’s sound is mastered to fit into AM radio and jukeboxes for example. To make the music broadly listenable, for example.

            Today everything is so blurry, because there’s no studio per se. It’s just sequenced, vocal is added, mastered, compressed and released (today’s pop). Rock and other stuff is still track recorded, tho.

          • hemogloben 12 days ago

            I worked in guitar audio effects for a while (the exact opposite of this discussion), but I started playing with stereo guitar rigs and then thought about three speaker setups and beyond.

            At a certain point the speakers really start to interfere with each other and you have to worry about the stability of the image at each point in the room...

            It occurred to me at that point that you're really starting to approach 3. You're trying to recreate the sound pressure patterns within the room.

            That's about the point I moved on to something simpler. Granted my explorations were super simple, but it was a VERY weird thought that got me thinking about the question you've asked.

    • TylerE 12 days ago

      I suspect the real reason is that vinyl largely escaped the ravages of the loudness war, because physics.

      (And also much of the digital gear in the 80s when the first wave of CD releases was pretty crappy)

      • bayindirh 12 days ago

        And the standard equalizer you need to apply during record/playback of the medium.

    • aaaaaaaaaaab 12 days ago

      >(more than are on a standard CD)

      Sorry, but CD (16bit PCM) has better dynamic range than vinyl. The best vinyl systems can have dynamic range of around 80dB. 16bit PCM is 96dB.

      • bayindirh 12 days ago

        Unless it’s brick-wall normalized during mastering.

        • kstrauser 12 days ago

          That's a real thing, to be sure. The Loudness Wars have completely ruined any number of otherwise decent recordings. The worst I ever heard was Dropkick Murphys's "The Meanest of Times" which had the dynamic range of an air conditioner in Phoenix.

          Still, you can always take a great analog recording, pipe it into a good ADC, and listen to that sample forever without degradation. I think almost everything can play FLACs now.

          • Tsiklon 12 days ago

            Metallica's Death Magnetic was another truly dreadful example of the loudness war - Thankfully a better mastered release came out in 2015. I've just got my hands on this release and comparing it against my original copy it is a night and day improvement - especially on "All Nightmare Long".

            • bayindirh 12 days ago

              Yeah, the first release was pure clipping, no music. I remember listening to it and saying? “Did all we wait for this? C’mon”.

              • nikau 11 days ago

                Hah I had the same experience, I thought some idiot had recorded it via their soundcard line in or something.

                Eventually got the better mastered version which was leaked from guitar hero or something.

        • masklinn 12 days ago

          Sure but that's got nothing to do with the CD itself. Except in that you would not be able to brick-wall a vynil at all so you don't.

        • vosper 12 days ago

          Which is not an issue with the digital format, but with the mastering.

          • bayindirh 12 days ago

            However, you can’t change the mastering of the album you have bought. When the CD version of the album you have bought has subpar audio quality, the abilities of the medium has no value and importance.

            • Sporktacular 12 days ago

              "When the CD version of the album you have bought has subpar audio quality"

              Yes, but these mastering choices could apply to the vinyl version too. In other words, your response had nothing to do with a comparison of the two media.

              • bayindirh 12 days ago

                Nope, you can't apply the same mastering to the vinyl, esp. the latest stonewalling compression/normalization techniques because of RIAA equalization [0].

                Without RIAA equalization, it's not possible to keep the needle in the groove with that amount of bass and low end. You can't keep the needle on the track with stonewalling even with RIAA equalization.

                As a result, you are limited by the medium itself, hence you have to make milder choices.


                • Sporktacular 9 days ago

                  Obviously the mastering differs. So your point is that the mandatory mastering limitations specific to each medium should be factored into comparisons between media?

                  Perhaps, but what about optional mastering choices like brick-wall limiting with normalization (which is what I think you meant)? Maybe I'm misunderstanding your point.

              • netr0ute 12 days ago

                > could apply to the vinyl version too

                They can't, because these choices create enough volume for the needle to go haywire, so mastering always has a better dynamic range.

                • Sporktacular 9 days ago

                  Again, mastering choices differ between distribution media, that's obvious.

                  When you say 'mastering always has a better dynamic range', did you mean CD quality PCM has a better dynamic range?

    • NovemberWhiskey 12 days ago

      The highest-of-high end analog tape with Dolby SR and the works is still objectively inferior to vanilla 44.1 kHz / 16 bit PCM.

    • bayindirh 12 days ago

      Telling this out loud upsets a lot of people, but I’m on the same boat with you.

      A good lossless album, regardless of the medium played through shows a significant difference in soundstage given the system can handle the resolution thrown at it when compared with a MP3/M4A file.

      • masklinn 12 days ago

        > Telling this out loud upsets a lot of people, but I’m on the same boat with you.

        It "upsets a lot of people" in the same sense and for the same reason as telling them drinking alkaline water cures cancer.

ben7799 12 days ago

Audiophile is full of nonsense but one of the more hilarious ones in something like this where the goal is "no digital" is it's been a long time since you could guarantee there was no digital going on between the instrument and the master.

They talk about Thriller a lot. Is it possible to have a completely analog copy of Thriller if it turned out a guitar went through a digital rack unit or a digital synthesizer was used? I don't know the answer to the question but in 1982 there were plenty of digital effects available.

The more recent you get the more unlikely it is the signal got from the instrument onto the master without going digital at some point, even if the recording is done on tape and then transferred to vinyl in a completely analog old fashioned sense.

If I plug my guitar directly into my amp and you're in the room you hear 100% analog. If I use the pedal board it got transferred A <->D <-> at least once before it went into the amp. Possibly with a dry signal staying analog but the effects might be digital and mixed back in.

  • swores 12 days ago

    I don't agree with the "no digital!" crowd, but surely their claim is that digital can't accurately reproduce the original intended sounds, so (even if they were right) that wouldn't make them need to boycott anything where the original intended sound includes something produced digitally? It's not like they're claiming to be allergic to digital noise, just that it loses fidelity in the transfers.

  • quickthrower2 12 days ago

    Reminds me of the home espresso world. Just get a good grinder, scales and a half decent machine.

    No need for a 20 step process where you are raking the coffee, levelling it off with another widget before tamping, checking the stream with a bottomless filter, etc. etc. and all that jazz.

  • madaxe_again 12 days ago

    There are digital pedals? Honest question - I had a side gig at school repairing and modifying pedals - it was all just transistors and op-amps, bistable oscillators, etc. - nothing digital at all.

    • fragmede 12 days ago

      Oh yeah totally. There are pedals these days that are a ADC->DSP->DAC. What's actually on the DSP can be programmable, so you have pedals who's function can be changed with the twist of a knob. They kept the same interface (aka quarter inch cables, and foot-stompable buttons), just modernized the interior. They range from something like the Zoom MS-70 CDR at $150, to $1,200 for one with multiple buttons, an analog pedal, and is laptop controllable via USB. (Line 6 Helix LT or Boss GT-1000.)

Nav_Panel 12 days ago

Afaict the cool thing about MoFi pressings (at least, ones from back in the day) is they were done at half speed. So, when the lacquer is cut from the master tape, they'd do it at half playback speed rather than full playback speed, which allowed the physical cutting head to track the high frequencies more accurately. I can say that this absolutely does make a difference during playback; my MoFi copy of Aja sounds very good (almost as good as the digital version!).

That said, vinyl is effectively an obsolete medium. I say this as someone who owns upwards of 1k vinyl records. I buy them because many recordings remain inaccessible or very challenging to find digitally. But I would never buy a newly released album on vinyl over digital if I had the choice and if both were using the same master.

  • notRobot 12 days ago

    I'm genuinely really curious, what kinds of recordings remain inaccessible in digital formats?

    How do you find out about them? And where do you procure them from? Do you mind sharing a couple examples?

    • Nav_Panel 11 days ago

      Biggest one was country. Lots of impossible to find stuff from the 50s thru the 70s. I'd learn about it by digging at the record shop near where I went to college. There's not much of an audience for it anymore, so the labels have no incentive to dig through their catalogs.

      Here's a country album I've never find a proper digital version of, only bad vinyl rips:

      In a completely different direction, 80s Japanese pop (city pop). I would listen to compilations, look up my favorite tracks on discogs to find the album it came from, and then... No dice. Often they're available on both CD and vinyl, but the vinyl version is often cheaper (because they made more original pressings than CD reissues). Sometimes they never get reissued on CD and vinyl is the only option.

      Here's a random example I found while digging around at a record store in Japan:

      Last case is dance music, which comes in 12" singles rather than albums. To find that stuff, I used to go to a used junk store that devoted its entire basement to records. Again, a lot of 80s and even 90s material never made it to digital.

      • notRobot 10 days ago

        Thank you so much for your response! This is fascinating to me (I'm really into stuff like city pop and dance music), and makes me really sad that there's only a tiny overpriced market for vinyl where I live, really no place where I can go and 'dig through bins' to find gems :(

        • Nav_Panel 10 days ago

          You're welcome! And yeah, City Pop is really annoying to collect. I used to go to BOOKOFF in Manhattan where they had a huge selection of $2 Japanese CDs, but they totally removed that section several years ago. Almost impossible to find now except online or in Japan. Well, there's a massive City Pop record store in Brooklyn but the prices are insane. Most records upwards of $50.

      • notRobot 10 days ago

        Thank you so much for your response! This is fascinating to me, and makes me really sad that there's only a tiny overpriced market for vinyl where I live, really no place where I can go and 'dig through bins' to find gems :(

  • ferongr 12 days ago

    >I can say that this absolutely does make a difference during playback

    Any logs from a double-blind, level matched, comparison session with enough trials for statistical significance to prove that assertion?

    • Nav_Panel 11 days ago

      No, because it's vinyl vs vinyl, and it's nearly impossible to control for other factors affecting playback.

acomjean 12 days ago

Digital was a badge of honor back in the 80s and 90s when CDs were new. No hiss, better sound. They Used to label CDs with 3 letters (the SARS code) : A for analog D for digital. For recording, mixing and mastering

We had a high school radio station (10 Watts, mono FM). One kid had all these great classic rock albums he was getting from his neighbor who was giving him them when he got the redone CD versions.

Even my old Sony V6 headphones have a "For Digital" sticker on them which thinking about it is pure marketing.

I mean we tried A/B testing when I was kid, CD vs Cassettes. The Cassettes with dolbyC sounded better when recorded from CD onto decent tapes (they were a little louder) and it was hard to tell the difference anyway. Maybe in the quiet passages you could hear hiss... CDs were a better format though and we knew it. Becuase cars and cd walkmans were rare, my CDs were often copied to cassettes.

At some point its good enough, just enjoy the performance.

egypturnash 12 days ago

Syd Schwartz, Mobile Fidelity’s chief marketing officer, made an apology.

“Mobile Fidelity makes great records, the best-sounding records that you can buy,” he said. “There had been choices made over the years and choices in marketing that have led to confusion and anger and a lot of questions, and there were narratives that had been propagating for a while that were untrue or false or myths. We were wrong not to have addressed this sooner.”

That sure is a lot of words to say “Yeah, uh, we lied, and we got caught. Sorry.” All these “choices” and “narratives” that just sort of… appeared… without any source to them.

  • AlbertCory 12 days ago

    Heavy use of the passive voice -- the dead giveaway for BS.

    It's interesting whether "digital is better than analog" but hardly relevant here. There are people who believe it's not true, and MoFi lied to them.

Beltalowda 12 days ago

In 2006 a "Controversies" section was removed from their Wikipedia page[1] after "a letter of complaint". You can still read it of course[2], part of which is:

"Additionally, some both inside and outside the audiophile community have criticized MFSL's [aka MoFi] willingness to stretch its "Original Master Recording" logo. For example, critics note that several MFSL Mk I releases are not from the original masters; one notorious example is the Beatles "Magical Mystery Tour". More troublesome to some, though, is MFSL's recent habit of releasing gold CDs that are sourced from digital master tapes instead of the original analog masters."

So it seems these allegations go back quite some time.

For what it's worth, I don't really buy in to the whole "audiophile" stuff and am skeptical you can hear the difference, but delivering "B" while it says "A" on the label is essentially defrauding your customers, and possibly illegal (or at least, it ought to be).



jef_leppard 12 days ago

This whole thing reminds me of the time some renowned wine connoisseurs blind taste tested vintage wines and they slipped 2 buck chuck in there. A few of them picked the 2 buck chuck as their favorite. None of them called it out as inferior wine. They all said stuff like "hints of smoke. Berry finish."

  • libraryatnight 12 days ago

    I recall reading a similar piece where they gave expert wine judges flights of wines to judge but some glasses would be the same wine from the same bottle and they'd judge it differently.

  • ip26 12 days ago

    I'm no pro but have found 2 buck chuck is pretty obvious. If only because it makes me feel ill. Was the test perhaps using midgrade rather than rotgut?

  • iasay 12 days ago

    I've heard a "wine expert" spew a load of rubbish like that and when offered it was obviously corked. Tasted like vinegar.

tptacek 12 days ago

In 2021, on the MoFi page, about their one-step process:

MFSL engineers begin with the original master tapes and meticulously cut a set of lacquers.


MFSL engineers begin with the original master recordings, painstakingly transfer them to DSD 256, and meticulously cut a set of lacquers.

Meanwhile, Michael Fremer, "the dean of audiophile writing":

I’ve now spoken to someone who would know and who confirmed, out of necessity off the record for now, that in 2018 Mobile Fidelity cut lacquers using analog master tapes (not copies). Will speculative click bait YouTube videos claiming otherwise be taken down after reading this?

(A bunch of this is in the article, I just think the quotes are kind of funny).

kazinator 12 days ago

> But these days, with the right equipment, digital recordings can be so good they can fool even the best ears.

"These days" being what, 1982-2022?

dopylitty 12 days ago

Honestly the thing that surprised me most was how real everyone in the story was.

The record store owner is a real dude. The record company has a bunch of real engineers who care about the product. Even the executives seem somewhat human.

It’s such a refreshing change from faceless stores with ever changing all caps names on faceless enormous e-commerce sites selling mass produced garbage.

And fleecing audiophiles is just good clean fun anyway.

  • nikau 11 days ago

    > And fleecing audiophiles is just good clean fun anyway

    My dad ran a small manufacturing business in the 80s, one guy he did a lot of work for wanted a small batch run of spikes with a top thread made from titanium.

    My dad did the quotes and asked what's its for, they were spikes for putting under speakers.

    Of course my dad mentioned it would make more sense and be much cheaper to make from stainless steel, to which the guy just responded "I'm selling to idiots with more money than brains who want a talking point, that's why its titanium."

    He also machined a bunch of titanium inserts for wooden volume knobs that supposedly clarified the sound or some rubbish like that.

NovemberWhiskey 12 days ago

Who knew that snake oil might not turn out even to be made from snakes?!

brightball 12 days ago

I spent a year working on a site that catered to the audiophile world and it blew my mind at the time. The lengths that people will go to are incredible.

There was one guy who had a $200,000 house with over $2 million worth of audio to setup his sound system. He had these special electrical units installed outside his house that were supposed to guarantee a perfectly steady current.

post_break 12 days ago

This is so funny. Company touts no digital, then goes on record saying yeah we used digital, completely ruining their reputation. Meanwhile I'm over here still mourning OiNK.

  • Nav_Panel 12 days ago

    Don't worry, its legacy lives on. Other sites have taken up the mantle (hmu). OiNK is gone, but not forgotten.

    • post_break 12 days ago

      How do I get in touch?

      • Nav_Panel 12 days ago

        check my profile, twitter is a good easy way, or email me via substack

everyone 12 days ago

This does seem more like a religious issue, eg. its more about faith, dogma, orthodoxy, and heresy, than it about anything tangible.

  • focusedone 12 days ago

    Bingo. Audio religion begging to be marketed to.

taylodl 12 days ago

Nyquist Theorem - learn it, love it, live it. I'm a musician and my mates and I have been going round and round on this issue for years. They swear analog is "warm" and "captures the whole wave." It's all BS. It's always been BS.

What the vinyl lovers never stop to realize is the audio signal has to be modified to record on vinyl - you're not listening to the music as recorded on the master tape, you're listening to an altered copy of it. Why is that? Because of limitations of the playback mechanism - you can't impart too much kinetic energy into the needle. So, the bass gets rolled off, pop filters and transient filters are employed, and high hats get dialed back. All to keep that stupid needle in its groove. Bottom line - the music is altered, the dynamics have been diminished, and it all sounds muddier, i.e. "warm", as a result.

The problem is a couple of generations grew up listening to this and thinking it was what music sounded like. The musicians making the music always complained that it never sounded right, but had to accept the limitations of the playback medium. I grew up in a musical family. All my friends played music. We always knew, and thought everybody else knew, that the music on records didn't sound right, it sounded muddy and compressed.

Then CD Audio came out in the 80's and what a difference! The bass was punchy instead of muddy, the high-hats and riding cymbals rang, the dynamic range was breathtaking and the stereo separation was unreal! I was elated the first time I heard an audio CD.

Then the critics came. It sounds "harsh" or "cold", it lost that "warmth", computers can't capture the actual analog waveform. That's when I began to realize that these audiophiles and critics didn't know what they were talking about. They obviously weren't musicians.

Fast forward 30 years and the only people still debating this topic are the rock & metal guys. The Jazz and Classical musicians quickly recognized the superiority of digital audio. But the masses don't listen to Jazz and Classical music, they listen to rock and metal (and pop - but the pop world doesn't seem to care one way or the other). I don't even know what to say to the rock and metal guys anymore (full disclosure - I'm a guitarist primarily playing rock, metal, prog and folk - they're pretty much all in the same camp on this issue). Rare is the guitarist that isn't using a pedal board. Extremely rare is the guitarist using an all-analog pedal board. Many guitarists are using SS (solid-state) amps now. They're recording into a DAW (digital audio workstation). Then they claim that somehow distributing the end result of vinyl is somehow pure? It's nuts, it's simply nuts. Add to that almost none of us are playing our amps clean and pristine, so what - you think it matters how accurately you capture our harmonic distortion?

Yet I see people lining up paying $40-$50 to get these albums thinking they're getting something different. Which I guess they are, they're getting an altered recording. This only reinforces what I've been saying for decades - vinyl is a scam and these people are laughing all the way to the bank.

I'm hoping now we can finally put this issue to rest and get everyone on board with digital audio. Now if we can talk to the recording engineers about these stupid "loudness wars"...

  • conqueso 12 days ago

    I get your frustration at the popular misconceptions around sound quality, but see no need to evangelize this issue. If people enjoy spending money on records, good for them, and good for the industry.

  • GuB-42 12 days ago

    > Fast forward 30 years and the only people still debating this topic are the rock & metal guys.

    An it makes sense. Rock and metal are played with electric guitars, and electric guitars are not much unless they are plugged into an amplifier. What it means is that the amp is not just part of sound reproduction, it is actually part of the instrument.

    It is especially true in metal, where amps are frequently overdriven for that characteristic sound, here the idea of sound reproduction completely goes out of the window, the sound characteristics come as much from the amp as they come from the guitar itself, if not more. And if you look closely during rock/metal concerts, guitars are almost never plugged directly into the PA system, the band come with their own amps and if necessary, the sound is picked up using microphones and then sent to the PA system.

    So it make as much sense for guitarists to want a specific kind of tube amp as it is for a violinist to care about the wood their instrument is made of.

    • netr0ute 12 days ago

      That all goes out the window if you use a DSP effects box, where you can "have your cake and eat it too" by having pedals (regular and expression types), amps, cabinets, and a mic for that cabinet all in one package. I use one because it's a lot cheaper than getting the individual parts and it fits in the palm of my hand!

thih9 12 days ago

> “These people who claim they have golden ears and can hear the difference between analog and digital, well, it turns out you couldn’t.”

But was there an album without DSD to compare to and hear the difference? I guess most people heard just the album with DSD (that admittedly sounded great).

What would happen if there was also a One Press version without DSD? Would people with “golden ears” be able to recognize it in a blind test?

  • PaulDavisThe1st 12 days ago

    Almost nothing has ever been recorded and released using only DSD. Why not? Most fundamentally because you can't edit DSD data, it has to be converted to PCM format first. This means it can only be used for live takes, with nothing done except topping & tailing the recording.

    There are are few "ultra-audiophile" recordings that have been made this way, but so few of them that the question of whether it's better or audibly different is almsot irrelevant.

    • thih9 12 days ago

      > Almost nothing has ever been recorded and released using only DSD.

      I don’t understand; I was talking about an album without DSD. Why are you referring to albums produced with only DSD?

      • PaulDavisThe1st 12 days ago

        My point was tha an album with DSD (only) is so rare that asking about a comparison to album without DSD is a little strange. Almost all albums are produced with digital technology that is not DSD, even the ones that include DSD.

        • thih9 12 days ago

          I still don’t get it. Why does it matter here whether DSD is rare or not?

          • PaulDavisThe1st 11 days ago

            The "distress" from the audiophile community in this case was that DSD formed a part of the signal chain from the original analog (magnetic tape) masters to their newly printed vinyl. They wanted a signal chain that was completely analog.

            Then, alongside that, is the belief by a slightly different set of audiophiles that DSD is the best digital format there is, and that recordings made only with DSD is as good as you can get (possibly, for some of them, better than pure analog).

            The difficulty with the 2nd group's belief is that there are very few recordings that exist which are pure DSD, and their beliefs about PCM mean that a DSD+PCM process is inherently flawed. Consequently, establishing the superiority of pure DSD is somewhat irrelevant, when there's almost nothing you can listen to that is produced that way.

Sporktacular 12 days ago

Any article involving high end digital vs. analogue audio is guaranteed to spawn a huge HN discussion about how gullible audiophiles are vs. how high quality audio is more subtle than a few good numbers.

You can count on it, like a precisely timed quartz oscillator. And as long as the power is on, it likewise will never be settled.

deltree7 12 days ago


This is no different than a section HNers fooled by companies like DuckDuckGo and VPNs

radicaldreamer 12 days ago

It's likely these records are still better than anything else out there because DSD is an extraordinary format for audio and they were still pulling directly from the masters (if anyone trusts that clarification of the story at this point).

codedokode 12 days ago

> These people who claim they have golden ears and can hear the difference between analog and digital, well, it turns out you couldn’t.

That's not fair because they didn't have both analog and digital records to compare.

AdmiralAsshat 12 days ago

Seems like now that it's out in the open, there'd be a lucrative market in selling the DSDs directly, rather than waiting until it goes to the labels or vendors to re-rip the vinyl remasters into FLAC/MP3?

  • radicaldreamer 12 days ago

    There is a market for DSD albums:

    I can see why people would be angry about the deception, but DSD is probably the highest fidelity audio anyone has ever heard (with the right equipment).

    Audiophiles should be celebrating a situation in which we today can listen to albums in higher fidelity than anyone except those who were around when they were being recorded... and that quality is accessible basically anywhere via the internet.

    • PaulDavisThe1st 12 days ago

      You can't edit DSD data in any conventional sense. This makes the use of fully DSD recordings rather limited in more or less any style of recorded music.

iamwil 12 days ago

As I was reading the title, I was thinking...Phoenix web framework...Elixir...record store, database? influenced the audio world?

Had a read it a couple times til I realized it was talking about AZ, and literally a record store.

dieselgate 12 days ago

Cool article, wasn’t familiar with MoFi or them being a small shop based in Sebastopol.

Interesting context as this seems very appropriate for the current times. As a society we are increasingly facing the digitization of basically everything.

I’m not an audiophile but like vinyl when possible, too bad “purer” all analog recordings are so “difficult” to produce. But hey these recordings are pretty old and maybe we should just be glad with what we have. (Obviously false/misleading advertising is lame but at least the MoFi staff was honest)

Sporktacular 12 days ago

Seems like if they had used high quality analog tape instead of DSD they would only be getting criticism for not calling it 'two-step'.

There are some amazing analogue mastering recorders like the Ampex ATR-102 which they could have used. Tape wear would have been an eventual issue if they had to re-press hundreds of times, but that's just what the vinyl nuts want right?

But on the other hand, they lied. Seems Jim Davis deserves every bit of criticism he gets. As do some of the golden-eared audiophile journalists who also happily oiled the BS machine.

peanut_worm 12 days ago

Audiophiles are funny. I remember seeing some guy on the internet was selling expensive “sound crystals” that you would put near your stereo that would make the sound “warmer” or “clearer”.

TabTwo 12 days ago

It’s a religion and now someone proved „there is no god“. Besides the money they spent, these people must really have a hard time. Really feel sorry for them.

lifeisstillgood 12 days ago

So I was debugging / documenting last night and put the "smoking gun" video on the background. I don't know why. I guess I felt if the WaPo was raving it must be good.

It was four middle aged men crammed into a cupboard, talking. And while I was not paying attention to every word, I missed the gun and the smoke.

Where is the bit where a MoFi employee says "we use digital"?

All I heard was waffle and self congratulatory

  • gregsadetsky 12 days ago

    2:12, “we do have 4x DSD” i.e. digital stream

    3:50, about making copies of tapes, “we bring a computer with 4x DSD analog to digital converters”

    • lifeisstillgood 11 days ago

      Oh is that what that meant - I guess I am used to journalists "telegraphing" things but the youtuber just seemed to carry on. That sounded like "oh yes we do that" to me but the lack of reaction meant Inmisunderstood

      Maybe I am too used to over the top influencers and presenters signalling everything I should react to. But sometimes if I am in a jargon filled world it would be nice for a guide.

      • pmyteh 11 days ago

        That's part of the skill of a good interviewer: making sure that the audience can follow along, understanding what's actually being said. The interviewer here is obviously an audio enthusiast/record shop owner rather than a journalist, so it's not surprising that they haven't had so much practice at this!

        (I've done interviewing for academic research, which has different goals but is also a skill. It's interesting how difficult it is at first.)

KingOfCoders 12 days ago

So a company used digital, audiophiles bought thousands of these, loved them and didn't hear anything.

xtiansimon 10 days ago

Sounds like guaranteed “organic”, “vegan”, “fair-trade”—take your pick—failure to disclose.

Whatever you believe about digital or analog, lying to the faithful has its consequences.

gadders 12 days ago

I wonder how many of the people upset about this could even tell the difference on a blind listen? I don't know if it's very, but I'd bet its a very low %.

rramadass 11 days ago

Question: Is "Hi-Res Audio" just snake oil or is there any Science behind it?

Technical answers please.

aaaaaaaaaaab 12 days ago

Audiophools got played yet again.

  • isatty 12 days ago

    Audiophile here - if they were using a proper master, minimally a true lossless file I don’t really see the problem.

    On the other hand, it seems to me like I meet more people who are just into buying new gear rather than enjoying the music, which is what the hobby is to me. Don’t even get me started on snake oil like cables.

    • allears 12 days ago

      Depends on the signal level and the impedance. For speaker cables, all you need is a big enough gauge to carry the current. But for low level signals, especially less than line level (magnetic phono cartridges, microphones, guitar pickups) a good quality cable with proper impedance and low capacitance can make a big difference. If you look at professional studio and broadcast supply catalogs, you will see mic cables with a specified capacitance per foot -- that's a spec that engineers look for. And I can personally vouch that an expensive guitar cable sounds better than a cheap one -- I was a skeptic until I tried one, and compared it with the standard cable I had been using. The difference wasn't subtle.

      • isatty 12 days ago

        The average person buying $2000 snake oil cables have no idea about impedance or capacitance. I’m not talking about studio professionals buying gear here.

        Idk what the cheap guitar cable was but any decent guitar cable will be indistinguishable from an expensive ass cable sonically. This doesn’t take into account better quality of construction and better connectors etc.

    • criddell 12 days ago

      Can you reliably hear a difference between a lossless file and a modern high bit rate MP3 (or other lossy format)?

      I can't, but then I have tinnitus...

      • isatty 12 days ago

        Depends on the music. 320k mp3 is actually pretty good.

        Anyway in this case I want a studio promising that their records were pressed from a high quality master to actually use a high quality master. It doesn’t matter if I can’t distinguish it.

        Just because a Camry can also transport my ass from a to b does not mean the Porsche dealership gets to sell me one over another car I specifically wanted.

        • npteljes 11 days ago

          Yes, this is a very important point that a lot of people miss. How are people supposed to learn to appreciate a genuine thing is if they are constantly swindled?

          Also, people are not rational beings first and foremost. Sentimentalism makes them vulnerable, but that shouldn't mean that it's open season for swindlers. I can make my origami from any paper basically, but it feels good in a certain way to order special paper from Japan just for this reason. And I'd feel cheated if the paper turned out to be from anywhere else - despite being no different on a material level.

  • user_7832 12 days ago

    > Audiophools

    You don’t need to attack any community, no matter how stupid it may be, if they are just minding their own business.

  • bayindirh 12 days ago

    There’s a fine line between a healthy audiophile and an over-obsessed one. Latter is a bad slippery slope, too.

user_7832 12 days ago

(Meta) I was hoping HN would stay civil and while it mostly is, I’d like to remind that what people do in their homes for themselves isn’t really something worth circle jerking over. If you like expensive gear and find a difference, great. If you don’t find a difference, that’s also fine. Please don’t bother attacking either group for their (relatively) harmless views.

allears 12 days ago

People who claim CDs have more dynamic range than analog are missing the point. Think of it in terms of graphics. 8 bit graphics can represent totally black, or totally white. That's a complete dynamic range. But it's the in-between shades that require more bits to specify.

It's the same with audio. It's not how soft or how loud a recording can get. It's the subtle shades of variation. 16 bits is pretty good, but not as good as 24 bits. You can tell by listening to the shimmer of a cymbal, or a plucked string fading to silence. You may not experience it as "stair-stepping," but there's an added degree of realism that more bits can confer.

And similarly about frequency range. Any audio system or media has more linear reproduction in the middle part of its range. So if you design a system that exceeds the range of human hearing, you'll get more linearity within the audible part of that range.

  • apohn 12 days ago

    > You can tell by listening to the shimmer of a cymbal, or a plucked string fading to silence.

    I don't think this is true. A long time ago I was involved in the headphone audiophile community and people were always using the shimmer of a cymbal as how they could tell the difference between MP3s and Lossless, Analog vs Digital, CD vs SACD or whatever. Then they'd do a blind test using Foobar2000 and start saying the whole blind testing methodology is flawed because surely they can hear the difference under normal listening conditions with their $1000 headphone connected to their $3000 amp using their $2000 DAC.

    My favorite quote was from somebody who said "Nobody in this community cares about music. They only care about their equipment."

    • allears 12 days ago

      I'm a recording engineer, and I can tell you that there definitely is such a thing as high quality audio. Certainly there are people who believe in snake oil and like to parade their ignorance as though it were knowledge. But if you bother to study the science of audio, read trade magazines, or hang out with engineers and studio owners, you will find that just quoting frequency range or dynamic range, or even noise floor, is not enough to specify an excellent audio signal. And if you think CD audio is as good as it gets, and nobody can tell the difference between that and a studio master tape, for instance, you are dismissing the expertise of the people who have studied and worked to make the recordings you love.

      • Kirby64 12 days ago

        The reasons for higher quality audio (24/32-bit data, higher frequency, etc) have value in the mastering process. For recording, yes there is value in it. It gives you freedom to adjust your recording without running out of headroom.

        For listening, no. Find me a double-blind test where 16-bit 48 or 44.1 kHz audio compares poorly to 24-bit 192 kHz audio. You won't find it. You'll find PLENTY of people claiming they can tell a difference, but it's just unfounded claims.

        • hakfoo 12 days ago

          I wonder if there's some real-world "resonance" we're ignoring.

          I could imagine an accurate statement like "the converted signal out of the DAC never diverges more than 0.005% from the original input", but could some aspects of that .005% produce some outsized weight when fed through a real audio system? I could imagine circuits that "rang" if given something that looks a little too square-wavey or hitting non-linear spots on the speaker's response curve differently.

          It would be interesting to do some sort of A/B/C/D testing-- analog and digital, on two different audio systems, for example, to see if some systems are more subject to that.

          • apohn 12 days ago

            So don't take this personally, but comments like yours are one of the major reasons I refuse to participate in any audiophile communities.

            There's always a hypothetical edge case for some audiophiles to claim that what they hear is possible. And no matter how much blind testing, research, or engineering is done, this hypothetical edge case means that something has not been proven. It's both pointless and exhausting to discuss anything with these people because the end result is always that the possibility that an edge case exists means you can't claim something is BS.

            Imagine somebody claimed that people can fly by flapping their arms. You say this is nonsense, but they said you have to prove it. So you ask 10 people to try to fly by flapping their hands and they cannot. This is not enough proof for them. So now you ask 1000 people to try it. Then the person claims maybe people in your country cannot fly this way, but in other countries they might be able to. So you go to 10 countries and ask 1000 people to try. Now the claim is that you did not test enough people who went to the gym every day and you should have asked the strongest people to fly. When nobody from this group can fly, maybe you should test the lightest people with light bones. This keeps going forever because there is always yet another edge case. Welcome to Audiophilia.

        • Sporktacular 12 days ago

          He's spot on. There are dozens of parameters that can describe audio quality. And his comment compared CD/44.1 kHz to master tape. He said nothing about hi-def.

  • mav88 12 days ago

    16-bit 44kHz is fine for playback and stair stepping does not exist:

    • Night_Thastus 12 days ago

      That article gets handed back and forth a lot. It's complicated. Real digital transmission systems like SPDIF, real-world clocks, real-world DACs are all imperfect.

      For real-world situations, sometimes a higher sample rate can actually provide benefit, even if by nyquist-shannon it shouldn't.

  • NovemberWhiskey 12 days ago

    No. A CD audio recording can contain literally all the information in the audio spectrum with enough dynamic range to capture human breathing and a jet flyover simultaneously.–Shannon_sampling_theor...

    • Sporktacular 12 days ago

      You are not understanding his point. Linear PCM systems encode quiet parts of music with a lower signal to noise level than louder parts. So by over-engineering the bit depth, you keep the quantisation noise further from perceptibility than without it.

      I think everyone gets sampling theory by now, your response was to an audio engineer.

      • NovemberWhiskey 12 days ago

        But with typical production flow for a CD, you don't really have any classic quantization noise because you dither (probably with noise shaping) during downsampling to 16 bit; the effect is a perceptually-weighted 120dB dynamic range.

        It doesn't matter that the poster is an audio engineer: there is simply no good science or objective evidence that people can hear the difference between well-recorded music played back with 24 vs. 16 bit media.

        • Sporktacular 8 days ago

          It does matter in the sense you are referring to basic sampling theory that anyone with 30 minutes to spare could learn, but quoting that to someone who's job literally depends on understanding it. You can assume he gets it and is making a point with that in mind.

  • Kirby64 12 days ago

    I don't think they are. Dynamic range is easily quantifiable and vinyl has worse dynamic range, full stop, compared to CDs. Anyone claiming otherwise does not know how to measure dynamic range.

    Likewise for bits, there is very little evidence (and, in fact, lots of evidence to the contrary) that you can detect the difference between a 24-bit and a 16-bit recording, assuming they're mastered the same way.

  • kalleboo 11 days ago

    Speakers can't move at the precision and speed required for stair-stepping to be a real thing.

  • WiseWeasel 12 days ago

    1 bit color encoding is black and white (represented by 0 or 1). 8 bits can encode 256 colors (2^8).